• 한국재료학회지
• /
• 제1권1호
• /
• pp.54-61
• /
• 1991

$YBa_2Cu_3O_{7-\delta}$ 단일 타게트를 사용하여 R. F. 마그네트론 스퍼터링법으로 MgO(100), Si(100)기판 위에 박막을 증착한 후, $880^{\circ}C$의 산소 분위기에서 1시간 동안 열처리를 하였다. 열처리 전 박막의 미세한 조성변화에 의해서도 열처리 후 박막의 미세구조 및 전기적 특성은 크게 변화했다. MgO(100)기판의 표면에 성장되는 입자들은 선택 배향적으로 성장하려는 경향을 가지므로 가늘고 길쭉한 입자 형상을 띠는 반면에 이들 입자위에 성장되는 다른 입자들은 결정 성장 방향의 선호도가 없으므로 둥근 모양의 입자형상을 가진다. 열처리 전 박학의 조성이 1-2-3을 벗어나면 증착 후 열처리할 때 액상이 형성되며, 액상의 양이 많을수록 선택 배향적 성장이 용이해져 texture를 쉽게 이룬다. 그러나 이러한 액상은 냉각 시에 초전도입자의 입계에 이차상으로 형성되기 때문에 초전도 박막의 전기적 특성, 특히 임계온도를 저하시킨다. 또한 $T_{c,\;zero}$는 $T_{c,\;on}$에 비해서 입계에 형성되는 이차상의 영향을 더 크게 받는다.

• Natural Product Sciences
• /
• 제6권3호
• /
• pp.147-150
• /
• 2000

The extracts of Carica papaya (flower), Barringtonia macrostachya (leaves), Coleus tuberosus (tuber), Mangifera indica (fruit skin) and Eugenia polyantha (leaves) showed strong in vitro anti-tumor promoting activity when assayed using Raji cells (Mooi et al., 1999). The antitumor promoting activity of the crude extracts was further analyzed by immunoblotting analysis of Raji cells carving Epstein-Barr virus genome. The expression of early antigens diffuse (EA-D) and early antigens restricted (EA-R) was determined by performing western blotting of treated Raji cells with human sera of nasopharyngeal carcinoma patients. All the plant extracts were shown to be able to suppress both EA-D and EA-R.

• 대한통합의학회지
• /
• 제1권4호
• /
• pp.75-83
• /
• 2013

Purpose : This research was conducted to see the correlation between sway speed and muscle activity for lower extremity of stroke patients through unstable surface training. Methods : A total of 60 patients were randomly divided unstable surface group (30 peoples) and stable surface group (30 people). Then they were asked to carry out the same exercise program for 6 weeks. The unstable surface group and stable surface group performed the exercise program on the balance mat and on the hard wood block. We checked the changes of sway speed and the changes in muscle activity for lower extremity. Results : The unstable surface group displayed significantly reduced sway speed, and improved muscle activity of lower extremity. There were significant correlation between change amount of muscle activity and sway velocity in Gastrocnemius, Biceps femoris during unstable surface training(r=.373, p<.05)(r=.369, p<.05). And there were not show significant differences during stable surface training. Conclusion : Judging from this, we can have knowledge that the correlation between increase of muscle activity and decrease of sway velocity for Gastrocnemius, Biceps femoris in the unstable surface training.

• 한국재료학회지
• /
• 제16권12호
• /
• pp.719-724
• /
• 2006

Ultrafine mullite powder was prepared from aluminium-secbutoxide and tetraethyl orthosilicate(TEOS) in the molar $Al_2O_3/SiO_2$=3/2. Sol-gel method by partial hydrolysis technique, as it were, first, TEOS was partially hydrolysized and then mixed with Al-secbutoxide for complete hydrolysis was used. X-ray diffraction, infrared spectroscopy and transmission electron microscopy, etc. confirmed that the mullite powder prepared by this method is in the stoichiometric $Al_2O_3/SiO_2$ ratio. Al-Si spinel was formed at $980^{\circ}C$ and ultrafine mullite powder with about 20 nm particle size was obtained above $1,200^{\circ}C$. Also mullite powders calcined at $1,600^{\circ}C$ had a stoichiometric composition, $3Al_2O_3{\cdot}2SiO_2$ and the lattice constants of the mullite powders calcined above $1,200^{\circ}C$ were almost coincided with theoretical values.

• 한국주조공학회지
• /
• 제32권5호
• /
• pp.211-218
• /
• 2012

The effects of thickness, silicon and manganese contents on the mechanical properties of 3.3 wt%C-0.1 wt%S thin-section gray cast iron plates were investigated. The eutectic cell counts and volume fraction of pearlite in the matrix decreased with increased thickness and therefore the strength and hardness decreased with it. Even though the eutectic cell count increased with increased silicon content, the volume fraction of pearlite decreased and the strength and hardness decreased with it. The pearlite was refined more with increased manganese content and therefore the strength and hardness increased with it.

• Korea-Australia Rheology Journal
• /
• 제18권4호
• /
• pp.217-224
• /
• 2006

Rapid flow advancement without void formation is essential in the liquid composite molding (LCM) such as resin transfer molding (RTM) and vacuum assisted resin transfer molding (VARTM). A highly permeable layer in multi-layered preform has an important role in improvement of the flow advancement. In this study, a multi-layered preform which consists of three layers is employed. Radial flow experiment is carried out for the multi-layered preform. A new analytic model for advancement of flow front is proposed and effective permeability is defined. The effective permeability for the multi-layered preform is obtained analytically and compared with experimental results. Compaction test is performed to determine the exact fiber volume traction of each layer in the multi-layered preform. Transverse permeability employed in modeling is measured experimentally unlike the previous studies. Accurate prediction of flow advancement is of great use for saving the processing time and enhancing product properties of the final part.

• International Journal of Railway
• /
• 제5권4호
• /
• pp.163-166
• /
• 2012

Many different types of floating slab track have been developed and installed around the world to reduce vibrations and noise originating in the surrounding environment. The main objective of this study is to examine the influence of slab length on behavior of floating slab track based on rail-slab-isolator interaction. The floating slab track is modeled by the connection between rail, slab, isolator, and slab mat in the transition zone. All elements were assembled in a simplified two-dimensional (2D) finite element model (FEM). The maximum length of FST is then investigated based on the maximum additional rail stress criterion as described in UIC 774-3R since no fully accepted design criteria for the slab length in FST systems currently exist.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1380-1385
• /
• 2001

This paper evaluates the fatigue fracture behavior of a chopped strand glass mat/polyester composite both in ai, and sea water, Bending fatigue (R=-1) was performed on dry and wet specimens, that is respectively in air and sea water. Where the pH concentration of sea water was controlled to 6.0,8.2, 10.0 and the wet specimens were immersed in the sea waters for 4 months. Throughout the tests, fatigue cracks both in the dry and wet specimens, tested in the air or sea water, occurred at the beginning of the cycle, followed by either of two regions one decreasing and the other increasing as the crack growth rate increases.

• 한국농공학회지
• /
• 제44권4호
• /
• pp.129-138
• /
• 2002

This paper presents a study on the discharge capacity of geotextiles as a horizontal drain layer placed between the layers of earth fill and natural soft ground. Required discharge capacity of geotextiles as drain layers estimated by consolidation analysis is proportional to the consolidation coefficient of the ground soils and the width of the earth fills. The field discharge capacity of the geotextiles are measured by the hydraulic transmissivity test. And the results show wide variation according to the material characteristics of geotextiles, water content of the soils, vertical pressure, and etc. For the short horizontal drain length, geotextile filter mat can be used for the horizontal drain layer. And f3r the long drain($25{\sim}55m$), it is used for the drain together with Bord Drain.

• 한국해양공학회지
• /
• 제14권1호
• /
• pp.44-51
• /
• 2000

Safety and integrity are required for reactor pressure vessels because they are operated in high temperature. There are single specimen method multiple specimen method and load ratio analysis method which used as evaluation of safety and integrity for reactor pressure vessels. In this study the fracture resistance curve(J-R curve) elastic-plastic fracture toughness($J_{IC}$) and material tearing modulus ($T_{mat}$) of SA 508 class 3 alloy steel used as reactor pressure vessel steel are measured and evaluated at room temperature 20$0^{\circ}C$ and 30$0^{\circ}C$ according to unloading compliance method and load ration analysis method. And then the comparison with experimental $J_{IC}$ and theoretical$J_{IC}$ by local fracture strain is managed.