• Earthquakes and Structures
• /
• v.7 no.5
• /
• pp.705-718
• /
• 2014

This paper presents an analytical model for determining the transverse reinforcement required for reinforced concrete exterior beam-column joints subjected to reversed cyclic loading. Although the joint aspect ratio can affect joint shear strength, current design codes do not consider its effects in calculating joint shear strength and the necessary amount of transverse reinforcement. This study re-evaluated previous exterior beam-column joint tests collected from 11 references and showed that the joint shear strength decreases as the joint aspect ratio increases. An analytical model was developed, to quantify the transverse reinforcement required to secure safe load flows in exterior beam-column joints. Comparisons with a database of exterior beam-column joint tests from published literature validated the model. The required sectional ratios of horizontal transverse reinforcement calculated by the proposed model were compared with those specified in ACI 352R-02. More transverse reinforcement is required as the joint aspect ratio increases, or as the ratio of vertical reinforcement decreases; however, ACI 352R-02 specifies a constant transverse reinforcement, regardless of the joint aspect ratio. This reevaluation of test data and the results of the analytical model demonstrate a need for new criteria that take the effects of joint aspect ratio into account in exterior joint design.

• Korea Journal of Hospital Management
• /
• v.29 no.1
• /
• pp.56-63
• /
• 2024

Purposes: This study aims to analyze the correlation with the current status of the medical resident application rate, physician's income, and non-benefit rates of majors in each specialty subject and to suggest implications. Methodology: First, it analyzes the correlation between the medical resident application rate by specialty subject and the income of physicians. Second, it analyzes the correlation between the income of specialists and the non-benefit rate for each specialty subject at the clinic level. Findings: First, a significant positive correlation was found between the medical resident application rate and the average physician's income for each specialty subject (r=.718, p<.01). Second, a significant positive correlation was observed between physician income at the practitioner level by medical specialty and the non-benefit rate (r=.726, p<.01). Practical Implications: In this study, the correlation between medical resident application rate by specialty subject and physician's income, non-payment and physician's income was confirmed. Choosing a department that is less risky and can earn higher income is a natural phenomenon, but it is necessary to adjust the physicians crowding phenomenon to a specific specialty subject at the government level to maintain the medical system.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.5
• /
• pp.715-718
• /
• 2013

Density of catalytic organisms can determine the biodegradation capacity and specific biodegradation rate (SBR). A new index, biodegradation capacity utilization (BCU, %), was developed for estimating the extent of actual biodegradation of a gas compound over the full capacity. Three methanotrophic cultures were serially diluted (1-1/25), and methane SBR and BCU were measured. Consistently, biomass reduction increased the SBR and decreased the BCU. Linearity (p < 0.05, r > 0.97) between the BCU and cell density indicated the reflection of biodegradation capacity by BCU. Therefore, BCU is indicative of whether the density of catalytic organisms is pertinent for SBR evaluation of low-soluble gaseous compounds.

• Steel and Composite Structures
• /
• v.20 no.3
• /
• pp.693-718
• /
• 2016

This paper presents a finite element procedure based on Bridging multi-scale method (BMM) in order to incorporate the effect of local/cross-sectional deformations (e.g., flange local buckling and web crippling) on the global behaviour of thin-walled members made of fibre-reinforced polymer composite laminates. This method allows the application of local shell elements in critical regions of an existing beam-type model. Therefore, it obviates the need for using computationally expensive shell elements in the whole domain of the structure, which is otherwise necessary to capture the effect of the localized behaviour. Consequently, highly accurate analysis results can be achieved with this method by using significantly smaller finite element model, compared to the existing methods. The proposed method can be used for composite polymer laminates with arbitrary fibre orientation directions in different layers of the material, and under various loading conditions. Comparison with full shell-type finite element analysis results are made in order to illustrate the efficiency and accuracy of the proposed technique.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1409-1412
• /
• 1999

The spectrophotometric determination method of scandium with eriochrome cyanine R (ECR) and the composition ratio of the complex were investigated in the presence of surfactants. A volume of 5 mL of 1.0×$10^{-3}$ M ECR and 10 mL of 2.0×$10^{-4}$ M CTMAB are necessary for the determination of 1.0×$10 ^{-7}$ ~ 3.0×$10^{-6}$ M Sc(III) at pH 6.5. The apparent molar absorption coefficient of the Sc(III)-ECR-CTMAB, ternary complex at 610 nm is 5.6×$10^5$ $mol^{-1}cm{-1}$L and its detection limit is 1.0×$10^{-7}$ M. Separation studies were conducted by the column method. The effect of pH, elution solution and the influence of rare earth elements as interferents was discussed. Their separation was carried out in 0.1 M HCl-50% methanol solution and 1.0 M HCl media. The method was applied for the determination of Sc(III) in monazite.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.4
• /
• pp.718-724
• /
• 2017

The combination of rabies immunoglobulin (RIG) with a vaccine is currently effective against rabies infections, but improvements are needed. Genetic engineering antibody technology is an attractive approach for developing novel antibodies to replace RIG. In our previous study, a single-chain variable fragment, scFv57R, against rabies virus glycoprotein was constructed. However, its inherent weak stability and short half-life compared with the parent RIG may limit its diagnostic and therapeutic application. Therefore, an acidic tail of synuclein (ATS) derived from the C-terminal acidic tail of human alpha-synuclein protein was fused to the C-terminus of scFv57R in order to help it resist adverse stress and improve the stability and half-life. The tail showed no apparent effect on the preparation procedure and affinity of the protein, nor did it change the neutralizing potency in vitro. In the ELISA test of molecular stability, the ATS fusion form of the protein, scFv57R-ATS, showed an increase in thermal stability and longer half-life in serum than scFv57R. The protection against fatal rabies virus challenge improved after fusing the tail to the scFv, which may be attributed to the improved stability. Thus, the ATS fusion approach presented here is easily implemented and can be used as a new strategy to improve the stability and half-life of engineered antibody proteins for practical applications.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.707-718
• /
• 2004

This study was conducted to evaluate the adequacy of an alternative a.m. - p.m. testing scheme for milk yield in comparison with the official test method based on weighing two milkings within 24 h. A total of 8,309 p.m. milking weights and 6,767 am. milking weights from 72 Holstein cows raised at N.L.R.I. were collected between October 2000 and November 2001. Seven statistical models were fitted to the data to derive formulas for estimating daily milk yields from morning or evening yields. In general, use of evening milkings less accurately estimated than did use morning rnilkings. Although the models do not differ much in the correlations between estimated and true daily milk yields, systematic under- and overestimation of daily milk yields were observed in all models with the exception of model 7, which accounted for heterogeneous variances by parity class, milking interval class, and lactation stage by fitting separate regression formulas within each combination of three factors.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.10
• /
• pp.891-896
• /
• 1994

Reactions of mer, trans-$Re({\equiv}NC_6H_5)(PPh_3)_2Cl_3$, I, with $PMe_3$ and $P(OMe)_34 at room temperature, led to mer, trans-$Re({\equiv}NC_6H_5)(PPh_3)(PMe_3)Cl_3$, II, and fac-$Re({\equiv}NC_6H_5)(PPh_3)(P(OMe)_3)Cl_34, III, respectively. The crystal structures of II and III were determined through X-ray diffraction. Ⅱ crystallizes in the orthorhombic system, space group $Pna2_1$ with cell parameters a=19.379(4) ${\AA}$, b=11.867(2) ${\AA}$, c = 12.676(3) ${\AA}$, and Z = 4. Least-squares refinement of the structure led to a $R(wR_2)$ factor of 0.0251 (0.0621) for 2203 unique reflections of $I>2{\sigma}(I)$ and for 306 variables. III crystallizes in the monoclinic system, space group $P2_1/n$ with cell parameters a=11.399(3) ${\AA}$, b=14.718(4) ${\AA}$, c=17.558(5) ${\AA}$, ${\beta}=97.79(2){\circ}$, and Z=4. Least-squares refinement of the structure led to a $R(wR_2)$ factor of 0.0571 (0.1384) for 3739 unique reflections of $I>2{\sigma}(I)$ and for 344 variables. Structural studies showed that the relative orientations of the two phosphines in both complexes are different, probably due to the differences in the coordinating abilities between $PMe_3$ and $P(OMe)_3$ to the 5-coordinate fluxional intermediate.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.700-718
• /
• 2003

Fructan, a polysaccharide existing in plants or produced by microorganisms, is a sugar polymer of fructose with $\beta$-2,6 linkages. In this study, we investigated some cosmeceutical properties of Fructan such as moisturizing effect, cell proliferation effect, anti-inflammation effect and cell cytotoxicity. Zymomonas mobilis, a microorganism producing Fructan, was cultured in a medium containing 10％ sucrose and 2％ yeast extract as main components for 24 hours at 37$^{\circ}C$ and pH 7. Fructan was obtained by precipitation from the cultured medium by adding alcohol (alcohol ratio of 1:3) after removing the enzyme by centrifuging. Fructan exhibited almost same moisturizing effect as hyaluronic acid and cell proliferation effect on human fibroblast and keratinocyte as well. Moreover, on cell proliferation test on bio-artificial skin constructed by 3-dimensional(3-D) culture after inducing primary skin inflammation with 0.5％ sodium lauryl sulfate (SLS), the 3-D artificial skin treated with 0.01 mg/ml, 0.05mg/ml of Fructan exhibited higher cell proliferation than the 3-D artificial skin treated with SLS only. On anti-inflammation test on 3-D artificial skin evaluated by measuring secreted quantity of interleukin-1$\alpha$ (IL-1$\alpha$) which is a pre-inflammatory mediator induced by SLS, the quantity of IL-1$\alpha$on the 3-D artificial skin treated with 0.01 mg/ml, 0.05mg/ml of Fructan was less than the one on the 3-D artificial skin treated with SLS only. As a result of these studies, Fructan has anti-inflammation effect against inflammatory reaction by a skin irritant as well as cell proliferation effect in bio-artificial skin. Fructan was also evaluated as a safe material without any toxicity in safety tests using fibroblasts and animals.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.669-681
• /
• 2023

Studies have tried to apply remote sensing technology, a non-destructive survey method, instead of the existing destructive survey, which requires relatively large labor input and a long time to estimate chlorophyll content, which is an important indicator for evaluating the growth of fruit trees. This study was conducted to non-destructively evaluate the chlorophyll content of pear tree leaves using unmanned aerial vehicle-based hyperspectral imagery for two years(2021, 2022). The reflectance of the single bands of the pear tree canopy extracted through image processing was band rationed to minimize unstable radiation effects depending on time changes. The estimation (calibration and validation) models were developed using machine learning algorithms of elastic-net, k-nearest neighbors(KNN), and support vector machine with band ratios as input variables. By comparing the performance of estimation models based on full band ratios, key band ratios that are advantageous for reducing computational costs and improving reproducibility were selected. As a result, for all machine learning models, when calibration of coefficient of determination (R²)≥0.67, root mean squared error (RMSE)≤1.22 ㎍/cm², relative error (RE)≤17.9% and validation of R²≥0.56, RMSE≤1.41 ㎍/cm², RE≤20.7% using full band ratios were compared, four key band ratios were selected. There was relatively no significant difference in validation performance between machine learning models. Therefore, the KNN model with the highest calibration performance was used as the standard, and its key band ratios were 710/714, 718/722, 754/758, and 758/762 nm. The performance of calibration showed R²=0.80, RMSE=0.94 ㎍/cm², RE=13.9%, and validation showed R²=0.57, RMSE=1.40 ㎍/cm², RE=20.5%. Although the performance results based on validation were not sufficient to estimate the chlorophyll content of pear tree leaves, it is meaningful that key band ratios were selected as a standard for future research. To improve estimation performance, it is necessary to continuously secure additional datasets and improve the estimation model by reproducing it in actual orchards. In future research, it is necessary to continuously secure additional datasets to improve estimation performance, verify the reliability of the selected key band ratios, and upgrade the estimation model to be reproducible in actual orchards.