• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.507-508
• /
• 2006

It is well-known that the mechanical properties of MMT (montmorillonite) nanocomposites are better than those of conventional composites. One of problems in fabricating MMT nanocomposites is a dispersion of nanoparticles in the composites. In this study, tensile tests were performed using universal testing machine to determine the effect of clay reinforced on the MMT/epoxy nanocomposites. It was found that the elastic modulus of nanocomposites was higher than that of pure epoxy irrespective of surface modification. Because MMT clay hod Strain of nanocomposite as a result of reinforced effect

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.507-511
• /
• 2008

Supporting energy efficiency and load balancing in wireless sensor network is the most important issue in devising the hierarchical routing protocols. Recently, the dual layered clustering scheme with GPS was proposed for the supporting of load balancing for cluster heads but there would be many collided messages in the overlapped area between two layers. Thereby, the purpose of this paper is to reduce the collision rate in the overlapped layer by concisely distinguish them with the same number of nodes in them. For the layer partition, this paper uses an equation $x^2+ y^2{\le}(\frac{R}{\sqrt{2\pi}})^2$ to distinguish layers. By using it, the scheme could efficiently distinguish two layers and gets the balanced number of elements in them. Therefore, the proposed routing scheme could prolong the overall network life cycle about 10% compared to the previous two layered clustering scheme.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.507-509
• /
• 1993

The monitor program, which controls overall operation of MC68000 based system and executes some commands and I/O operations, is a system program and consists of functions that executes these operations. Monitor program can be easily applied to design a digital filter. This paper approaches to the object, to which refer above, by considerng algorithm of monitor program, which operates in M68000 based system, and concerning theory. This monitor program operate by the serial communication between host IBM-PC and target MC68000 system with MC6850 and MAX232C.

• Nuclear Engineering and Technology
• /
• v.30 no.6
• /
• pp.507-517
• /
• 1998

Unlike conventional fuel types, fuel constituent redistribution and sodium intrusion into the fuel slug are the unique phenomena of the irradiated metallic fuel. A thermal calculation model on metallic U-10 wt.%Zr fuel rod for LMRs is developed with considerations given to these phenomena. The amount of constituent redistribution is estimated based on the thermotransport process. The temperature profile of fuel slug is predicted by taking into account of Zr redistribution, porosity formation and sodium logging effects. A sample calculation is performed and compared to experimental data in literature. As a result, the predicted redistribution and temperature profile are well agreed with experimental data, assuming that 15 times increment of ex-reactor diffusivity, $Q_{r}$ $^{*}$ is -50 kJ/mole and sodium is infiltrated only outside of the fuel slug. Furthermore, the redistribution effects on fuel integrity and fuel temperature profile are discussed.d.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.3
• /
• pp.504-507
• /
• 2001

The partial 16S gene sequences of six filamentous cyanobacterial strains, Oscillatoria lmosa KCTC AG10168, Oscillatoria princeps KCTC AG10153, Oscillatoria sp. KCTC AG 10184, Phormidium tenue KCTC AG10158, Phormidium parchydematicum KCTC AG10164, and Lyngbya hieronymusii KCTC AG10199, which were isolated in the late summer at Daecheong Reservoirs, were determined and assigned their phylogenetic and taxonomic position among taxa of order Ocillatoriales whose partial 16S rRNA gene sequences aligned in this suty, were very heterogeneously clustered with other taxa. The two strains, Oscillatoria limosa KCTC AG10168 and O. princeps KCTC AG10153, formed a cluster with O. sancta PCC7515, which supported 64% of the bootstrap trees with high similarity (19-96.15%). Strain Oscillatoria sp. KCTC AG10184, that was known to produce a nasty substance, was closely related to the toxic Oscillatoria group. The study on morphological variation in various environments and toxin production will confirm the taxonomic status of these species. Phormidium tenus KCTC AG10158 and Phormidium parchydematicum KCTC AG10164 made a cluster with other oscillatorian species of Phormidium, Oscillatoria, and Leptolynbya, which supproted 100% of the bootstrap trees with a very high sequence smilarity (96.8-99.8%) in thsi study. The sequence analysis in this study also supported that taxa of oscillatoriales are not monophyletic. Some of the fractures, such as the presence or absence of sheath and cell shape, which were used to define them, would be inadequate and should be reconfirmed. We suggest that sequences of partial 16S rRNA gene fragments aligned in this study should be more useful than morphological features in the identification and reconfirmation of the taxonomic status of these oscillactorian cyanobacteria.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.800-801
• /
• 2011

최근 건강-의료 분야의 학과 신설 및 전공자가 급격하게 늘어남에 따라 해부학 교육의 질적 향성 및 학습자의 학습효과 증진을 도모하기 위해서는 새로운 강의방식의 도입이 필요하다. 따라서 본 연구는 해부학 교육에 있어 면대면 강의에 사용한 내용을 바탕으로 가상강의 컨텐츠를 자체개발하였고, 2007-2009년 간호학과 및 스포츠과학부의 전공필수 과목인 해부학 강의를 가상강의 방식으로 실시하였다. 이 과목을 수강한 2개 학과 231명을 대상으로 강의 종료 후 가상강의실 게시판 및 컨텐츠 활용 빈도, 개별 설문조사, 학기말 성적을 확보하여 가상강의실 활용도, 만족도 및 학업성취도 상호간의 상관관계를 분석하였다. 학생들의 만족도, 난이도, 흥미도, 평가의 적절성, 전공연계성 등에서 긍정적인 평가를 받았다. 또한 가상강의실의 로그인 횟수와 게시판에 대한 학생들의 만족도가 높게 나타났다. 학업성취도는 난이도 (r=0.411, p<0.01)와 높은 상관관계를 나타내었고, 만족도-흥미도(r=0.407, p<0.01), 만족도-전공연계성 (r=0.507, p<0.01), 흥미도-전공연계성 간에도 높은 상관관계를 보였으나 흥미도-전공연계성(r=0.474, p<0.01) 등에서 높은 상관관계를 나타내었다. 결론적으로 본 연구를 통해 건강-의료 분야의 전공자뿐만 아니라 다양한 분야에서 폭넓게 요구하고 있는 해부학 강의수요를 효과적으로 흡수함과 아울러 해부학교육에 있어 새로운 지평을 열수 있는 가상강의에 대한 연구로서, 향후 해부학 교육에 있어 충분한 활용가치가 있는 효과적인 교수법이 될 것으로 사료된다.

• Nuclear Engineering and Technology
• /
• v.35 no.6
• /
• pp.507-514
• /
• 2003

Recently dry decontamination/surface-cleaning technology using plasma etching has been focused in the nuclear industry. In this study, the applicability of this new dry processing technique are experimentally investigated by examining the etching reaction of $UO_2$, Co, and Mo in r.f. plasma with the etchant gas of $CF_4/O_2$ mixture. $UO_2$ is chosen as a representing material for uranium and TRU (TRans-Uranic) compounds while metallic Co and Mo are selected because they are the principal contaminants in the used metallic nuclear components such as valves and pipes made of stainless steel or inconel. Results show that in all cases maximum etching rate is achieved when the mole fraction of $UO_2\;in\;CF_4/O_2$ mixture gas is $20\%$, regardless of temperature and r.f. power. In case of $UO_2$, the highest etching reaction rate is greater than 1000 monolayers/min. at $370^{\circ}C$ under 150 W r.f. power which is equivalent to $0.4{\mu}m/min$. As for Co, etching reaction begins to take place significantly when the temperature exceeds $350^{\circ}C$. Maximum etching rate achieved at $380^{\circ}C\;is\;0.06{\mu}m/min$. Mo etching reaction takes place vigorously even at relatively low temperature and the reaction rate increases drastically with increasing temperature. Highest etching rate at $380^{\circ}C\;is\;1.9{\mu}m/min$. According to OES (Optical Emission Spectroscopy) and AES (Auger Electron Spectroscopy) analysis, primary reaction seems to be a fluorination reaction, but carbonyl compound formation reaction may assist the dominant reaction, especially in case of Co and Mo. Through this basic study, the feasibility and the applicability of plasma decontamination technique are demonstrated.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.501-507
• /
• 2017

When zenor diode load current is necessary to be controlled by input voltage as a circuit load, existing voltage controlling method cannot be applied to it because the output current of zenor diode is changed due to breakdown voltage variations. We propose input voltage controlled output current source regardless of zenor breakdown voltage variation due to degradation resulted from severe current applied electronic component life test as a circuit load in this paper. We show breakdown voltage characteristics of this zenor diode circuit through simulation, applying adequate values for each component in order to verify the circuit composed of that method, and then show the result in which output current is controlled by input voltage. We confirmed the output current varies proportional to input voltage, and developed circuit shows a constant value independent of zenor diode breakdown voltage variations due to component degradations.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.507-512
• /
• 2000

A new copper(II) complex, Cu(dpb)(NO$_3$)$_2$(H$_2$O) (dpb=2,2'-dipyridylbenzylamine) (1) was synthesized from the reaction of Cu(NO$_3$)$_2$·3H$_2$O and dpb in ethanol solution followed by recrystallization in acetonitrile. The structure of 1 was determined by X-ray diffraction methods. The single crystal structure was characterized as follows: space group P2$_1$/c, Z=4, a=12.501(9)$\AA$, b=9.231(10)$\AA$, c=17.119(6)$\AA$, $\alpha$=90$^{\circ}$, $\beta$=107.33(4)$^{\circ}$, $\gamma$=90$^{\circ}$, V=1885.8(2)$\AA^3$, R$_1$=0.0647, $_{w}R$_2$$=0.1866 for 3258 reflections. Compound was a typical paramagnetic copper(II) complex coordinated by 2,2'-dipyridylamine derivative ligand, which was confirmed by EPR, NMR, UV/VIS, and IR spectroscopy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6852-6859
• /
• 2015

The purpose of this study was to determine the growth characteristics and distribution pattern of a brackish water clam Corbicula japonica in Seomjin River. Field samples were taken from 14 stations with salinity gradients during spring. Salinity at the bottom layer ranged from 1.0 psu to 32.9 psu, with low salinities in the upper area of the river. In particular, salinity at St.11 was decreased drastically to be ca. 15.0 psu, indicating an intermediate salinity zone. The distribution pattern of C. japonica was related to the salinity gradient, with the highest densities of $2,102ind.m^{-2}$ at Station 13, followed by $1,507ind.m^{-2}$ at Station 11. Here, we focused on the growth characteristics of collected C. japonica collected at two stations with different salinity values. The relationship between shell length and total weight was highly correlated ($R^2=0.91$, P<0.001) at Station 13 compared to that at Station 11 ($R^2=0.72$, P<0.001). On the other hands, the degree of correlation between shell length and shell height (SH) or shell width (SW) at Station 11 (SH: $R^2=0.91$, P<0.001; SW: $R^2=0.69$, P<0.001) was higher than that at Station 13 (SH: $R^2=0.64$, P<0.001; SW: $R^2=0.48$, P<0.001). In addition, fatness index of C. japonica at Station 13 was significantly (P < 0.001) higher than that at St. 11 (t-test value=-22.8, p<0.001). This implies that C. japonica at Station 13 might have enhanced their somatic growth, whereas C. japonica at Station 11 might have this kind of defense mechanism their internal organization against the salinity stress. Ecologically, this kind of defense mechanism of C. japonica against salinity flucuation may play an important role in their survival strategy.