• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.2
• /
• pp.226-233
• /
• 2023

In this study, we compared the performance of several refrigeration cycles using different refrigerants and utilizing the cold heat of liquefied natural gas (LNG) for the liquefaction of carbon dioxide. The final conditions for the liquefied CO₂ were set to -20℃ and 20 bar. The refrigerants used included R404a, ammonia, propane, and propylene using a vapor recompression refrigeration cycle. For the refrigeration cycle, the CO₂ at room temperature and pressure was compressed in a two-stage compression process with an intermediate cooling stage using a refrigeration unit. To compare with the liquefaction process using refrigeration, we compressed the CO₂ to 8 bar in a single compression stage and cooled it to around -50℃ using the cold heat of the LNG before liquefying it. Results showed that using ammonia as the refrigerant required the least amount of compressor power for the liquefaction process, and the heat transfer area of the evaporator was the smallest when using propylene as the refrigerant. Using the cold heat of LNG instead of refrigeration using R404a resulted in approximately 69% less energy consumption.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.4
• /
• pp.404-409
• /
• 1998

Nine cows were superovulated by administration of 8 injections of Folltropin each (2.5 ml/injection, 1.75 mg/ml) i.m spread over 4 days, beginning on Day 10 of oestrous cycle, and 30 and 20 mg prostaglandin $F_{2{\alpha}}$ was given along with the 5th and 6th injections of Folltropin, respectively, to induce luteolysis. The animals were artificially inseminated 48, 60 and 72 h after the first prostaglandin $F_{2{\alpha}}$ injection. The number of corpora lutea was recorded by palpation per rectum and by ultrasonography on Day 6 (Day 0 = day of oestrus). The ovaries were examined daily by ultrasonography on Days 3-9 of the oestrous cycle for following the growth and regression of the largest follicle, which was considered the morphologically dominant follicle. The animals were classified into two groups depending upon the presence (n = 4) and absence of a dominant follicle (n = 5). There was a high correlation (r = 0.97, p < 0.001) between the number of corpora lutea observed by palpation per rectum and that determined by ultrasonography. Mean (${\pm}SEM$) number of corpora lutea determined by ultrasonography ($11.20{\pm}3.71$ vs $3.25{\pm}0.75$) and by palpation per rectum ($10.40{\pm}3.91$ vs $2.25{\pm}0.75$) was significantly higher (p < 0.05) in the nondominant group compared to that in the dominant group. There was no difference in the numbers of follicles 2-3 mm ($13.80{\pm}4.49$ vs $8.00{\pm}1.08$), 4-6 mm ($7.00{\pm}1.87$ vs $3.50{\pm}1.33$), and the total number of follicles ${\geq}2mm$ ($22.00{\pm}5.95$ vs $12.50{\pm}1.26$) between the two groups, one day prior to initiation of superovulation. There was, however, a significant (p<0.01) positive correlation between the number of corpora lutea with the numbers of follicles 2-3 mm (r = 0.83), 4-6 mm (r = 0.80) and the total number of follicles ${\geq}2mm$ (r = 0.89) observed one day prior to initiation of superovulation. The results of this study indicate that the presence of a dominant follicle adversely affects the superovulatory response in cattle.

• Journal of Powder Materials
• /
• v.17 no.5
• /
• pp.404-408
• /
• 2010

The effects of high energy ball-milling (HEBM) on the sintering behavior and piezoelectric properties of 0.1 wt% $Li_2CO_3$ doped 0.8Pb($Mg_{1/3}Nb_{2/3}$)$O_3$-0.2Pb($Zr_{0.475}Ti_{0.525}$)$O_3$ (PMN-PZT) ceramics were investigated. It was found that HEBM treatment was quite effective to reduce the average particle size down to 300 nm, leading to increased density as well as enhanced piezoelectric properties of a sintered specimen even though prolonged HEBM resulted in unwanted secondary phases that caused a degradation of piezoelectric properties. The dielectric constant ($\varepsilon_r$), piezoelectric coupling factor ($k_p$) and piezoelectric constant $d_{33}$ of 0.1 wt% $Li_2CO_3$ doped PMN-PZT ceramics prepared via HEBM for 10 h reached 2040, 0.68 and 554 pC/N, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1466-1473
• /
• 2012

Soft icecream is made by scraping an ice formed on the inside of the cylindrical evaporator, where R-404A is evaporating in the annulus. The heat transfer characteristics of the refrigerant evaporation and those during icecream formation were experimentally investigated. Results show that the refrigerant-side heat transfer coefficients are highly dependent on the location in the evaporator due to the complex annulus configuration. The heat transfer coefficient at the inlet is generally lower than those of other locations. The average heat transfer coefficient increases as heat flux increases or saturation temperature decreases. A correlation is developed to predict the refrigerant-side heat transfer coefficient. The icecream-side heat transfer coefficient oscillates continuously due to the periodic removal of ice formed on the surface. The average heat transfer coefficient during icecream formation is approximately 280 W/$m^2K$, and that during single-phase cooling increased from 150 W/$m^2K$ to 250 W/$m^2K$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.530-539
• /
• 2018

This study was conducted to compare the resilience, social support, psychosocial stress and burnout between novice and experienced nurses. Data collection was conducted using structured questionnaires for 65 novice nurses with less than one year of clinical experience and 70 experienced nurses with at least seven years of clinical experience working in general hospitals. The results revealed that the resilience of novice nurses was lower than that of experienced nurses, and there were significant differences according to educational level, job satisfaction, and subjective health status. Conversely, experienced nurses' resilience differed according to their position. In addition, the resilience of novice and experienced nurses showed the highest correlation with psychosocial stress (r=-0.633, p<0.001; r=-0.586, p<0.001), while novice nurses' social support (r=0.560, p<0.001) and experienced nurses' burnout (r=-0.404, p=0.001) showed the second highest correlations. These results demonstrate that the factors related to resilience of novice and the experienced nurses differ. Therefore, it is necessary to develop a differentiated program according to the characteristics of resilience of each nurse to improve the resilience of novice and experienced nurses.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.404-409
• /
• 2008

This paper consists largely of two parts: the first part introduces the revised railway human reliability analysis (R-HRA) method which is to be used under the railway risk assessment framework, and the second part presents the features of a computer software which was developed for aiding the R-HRA process. The revised R-HRA method supplements the original R-HRA method by providing a specific task analysis guideline and a classification of performance shaping factors (PSFs) to support a consistent analysis between analysts. The R-HRA software aids the analysts in gathering information for HRA, qualitative error prediction including identification of external error modes and internal error modes, quantification of human error probability, and reporting the overall analysis results. The revised R-HRA method and software are expected to support the analysts in an effective and efficient way in analysing human error potential in railway event or accident scenarios.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.517-522
• /
• 2013

Small size ice-cream maker has two evaporators having different evaporating temperatures of $4^{\circ}C$ and $-8^{\circ}C$. In such case, ice-cream maker system design becomes complicated because multiple capillary tubes affects one another. In this study, performance analysis was conducted for the soft ice-cream maker having two evaporators operating at different temperatures. The compressor was analyzed using efficiency models, the capillary tube was modeled assuming one-dimensional flow, the condenser and the evaporators were modeld based on UA-LMTD method. The refrigeration cycle simulation program was developed applying the enthalpy, pressure and mass balance on each component. Comparison of the test data with the simulated results for R404A revealed that evaporator temperatures of refrigerator and freezer agreed within $3^{\circ}C$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.404-413
• /
• 2019

Objectives: Chronic obstructive pulmonary disease(COPD) is an important cause of mortality in workers exposed to hazardous dust, such as crystalline silica or coal, and COPD is related to inflammation and oxidative stress in the lung. The aim of this study was to evaluate the association of oxidative stress and inflammation to COPD in retired workers exposed to mineral dust. Methods: The levels of malondialdehyde(MDA) in EBC as biomarkers for oxidative stress and C-reactive protein(CRP) and lactate dehydrogenase(LD) as biomarkers for inflammation were measured in 107 male subjects(63 pneumoconiosis and 42 COPD subjects). Results: Mean levels of EBC MDA(2.03 nmol/L vs. 4.65 nmol/L, p=0.010) and serum LD(170.3 U/L vs. 185.9 U/L, p=0.022) were significantly higher in subjects with COPD, but mean levels of serum CRP(p=0.469) did not show a statistical difference between the study groups. Level of EBC MDA was negatively correlated with ${%}FEV_1$ predicted(r=-0.279, p=0.004) and ${%}FEV_1/FVC$ ratio(r=-0.397, p<0.001). Conclusions: These results suggest that EBC is a useful biological matrix for investigation of respiratory oxidative stress. High levels of EBC MDA and serum LD are related to COPD in retired workers exposed to mineral dust.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.5
• /
• pp.400-404
• /
• 2014

Objective : Clip artifacts limit the visualization of intracranial structures in CT scans from patients after aneurysmal clipping with cobalt alloy clips. This study is to analyze the parameters influencing the degree of clip artifacts. Methods : Postoperative CT scans of 60 patients with straight cobalt alloy-clipped aneurysms were analyzed for the maximal diameter of white artifacts and the angle and number of streak artifacts in axial images, and the maximal diameter of artifacts in three-dimensional (3-D) volume-rendered images. The correlation coefficient (CC) was determined between each clip artifact type and the clip blade length and clip orientation to the CT scan (angle a, lateral clip inclination in axial images; angle b, clip gradient to scan plane in lateral scout images). Results : Angle b correlated negatively with white artifacts (r=-0.589, p<0.001) and positively with the angle (r=0.636, p<0.001) and number (r=0.505, p<0.001) of streak artifacts. Artifacts in 3-D images correlated with clip blade length (r=0.454, p=0.004). Multiple linear regression analysis revealed that angle b was the major parameter influencing white artifacts and the angle and number of streak artifacts in axial images (p<0.001), whereas clip blade length was a major factor in 3-D images (p=0.034). Conclusion : Use of a clip orientation perpendicular to the scan gantry angle decreased the amount of white artifacts and allowed better visualization of the clip site.

• Journal of applied mathematics & informatics
• /
• v.34 no.5_6
• /
• pp.397-404
• /
• 2016

In this work, a method is given to construct quantum codes from cyclic codes over F₄ + vF₄ which will be denoted as R throughout the paper, where v² = v and a Gray map is defined between R and where F₄ is the field with 4 elements. Some optimal quantum code parameters and others will be presented at the end of the paper.