• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.765-768
• /
• 2008

To make 3D camera system, we check the possibility of advanced range camera module based on measuring the time delay of modulated infrared light, using a single detector chip fabricated on standard CMOS process. To depth information, electronic shutter and interlaced scanning method of 2D sensor is needed. Especially, we design "lens system, illumination unit" and review simulation result.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1111-1113
• /
• 2004

n+ etching process is investigated in the fabrication of TFF-LCD using low resistance data line of Mo/Al/Mo. Problems of consumption of upper Mo layer and contamination of channel area are resolved. Either of HCl or $Cl_2$ can be selected as a main etchant gas, and either of $SF_6$ or $CF_4$ can be selected as an additive. Plasma treatment after n+ etching process can reduce the off-current high problem.

• Proceedings of the Technology Innovation Conference
• /
• 1997.07a
• /
• pp.124-159
• /
• 1997

This paper examines a significant example of accumulation of technology in post war Japan - the development process of the videocasstte recorder (VCR) for home use, and the dynamic evolution process of the mass market. The purpose of analyzing the Japanese home VCR industry is to clarify how and why only the Japanese makers had succeeded in developing home VCR and dominated. the global mass market and to make clear the dynamic process of industrial evolution. This study found out the following facts; 1) Japanese inter-firm interactions in the VCR have been carried out by the structure of "the competition and cooperation among the engaged players" form the initial stage, to growing, and maturing stage. 2) The process of competition and cooperation produced the revolutionary innovation through a continuous systematic development process in the R&D phase. 3) The process of competition and cooperation accelerated the speed of technological progress and the rapid growth of the industry in the growing and maturing stage.

• Journal of the Korean Society of Systems Engineering
• /
• v.6 no.1
• /
• pp.25-32
• /
• 2010

The Test and Evaluation (T&E) process is an integral part of the Systems Engineering Process. The purpose of Test and Evaluation (T&E) in a system development is to identify the areas of risk to be reduced or eliminated. In this study, when develop aircraft of Civil Aviation with development experience of Military Aircraft, it is that establish Test and Evaluation process. Test and Evaluation for KC-100 small aircraft development can divide to certification test and development test. Certification test is proved compliance about Korea Airworthiness standard (KAS Part 23), through Development Test verify required performance of aircraft. These Test and Evaluation Process is more efficient and optimized.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.415-420
• /
• 2013

The new recycling technology for aged Aluminum wires in overhead conductor have been carried out. We are attempting to develop remanufacturing method for them for more effective way of recycling in stead of its conventional remelting process. The weld of aged aluminum wires play a vital role in remanufacture process. The paper investigates the mechanical properties during cold welding process of aged Aluminum wire. The tensile tests and microscopic analysis results are discussed to underscore the hardening features of welded aluminum wire. Various graphs are presented accompanied by discussion about their relevance on the process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.640-643
• /
• 2007

The effect of plasma damage was investigated on amorphous gallium-indium-zinc oxide (a-GIZO) films and transistors. Ion-bombardment by plasma process affects to turn semiconductor to conductor materials and plasma radiation may degrade to transistor electrical properties. All damages are easily recovered with a $350^{\circ}C$ thermal annealing.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.134-136
• /
• 1998

When a MCCB Instant trip spring which is adjusted to notrip at -20% of each current from $5{\times}In$ to $10{\times}In$ and trip +20% of those is designed, we should know attraction force between Fixed Magnet and Armature. So we first made some samples, do experiments of weight, and simulated the modelling by 3D Maxwell S/W. With values of experiment and simulated values, we do design instant trip springs and repeat the above process. Finally we set up the Process of designing Instant spring. With it, we can save time and R&D cost.

• Journal of Technology Innovation
• /
• v.10 no.1
• /
• pp.201-217
• /
• 2002

Researchers, institutes, and government involved in research & development (R&D) are faced with the problem of performing R&D project evaluations. As a real-word case of evaluation, we elicited and reproduced the evaluation process of the national nuclear R&D projects, using a specific case study of Korea. In the methodology, the analytic hierarchy process (AHP) is employed to evaluate and rank the selected nuclear R&D projects which have a wide range of evaluation objectives and characteristics. As a result, we obtained relative ranking for research projects and importance of evaluation criteria. The method and implications can be easily understood and applied by practitioners since it follows naturally the standard practice of evaluating and relative comparisons of performance using evaluation procedures. By applying particular R&D project output to the procedures, project evaluators can compare and prioritize evaluation objectives.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.48-50
• /
• 2005

This paper presents the design and development of web control algorithm of continuous process control system using vector inverter. The Diameter of web is calculated, tension is controlled by PID control and the speed reference of motor is calculated at current diameter. The performance of web control in this paper is verified by experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.631-641
• /
• 2011

Digital Multimedia Broadcasting (DMB) and Internet Protocol Television (IPTV) are now in commercial service, tearing down the traditional boundaries between the telecommunications and broadcasting sectors. These latest developments also hold important implications for research projects in related areas. Both telecommunications and broadcasting being fields with a strong service orientation, market demand should be the primary consideration when selecting research and development (R&D) projects in these areas. This study presents a process for selecting converged telecommunications-broadcasting technology development projects from a demand-oriented perspective, using criteria that are based on projected future demand characteristics. Aimed at increasing the efficiency of the R&D project selection process in telecommunications and broadcasting convergence, this study can point out new directions in R&D management in this field.