• 인터넷정보학회논문지
• /
• 제19권2호
• /
• pp.43-48
• /
• 2018

Various artifacts that are produced as software R&D project progresses contain research plan, research report, software requirements and design descriptions, etc. When conducting a software R&D project, it is necessary to confirm that the developed system has implemented its research requirements well. However, various research results make it difficult to design appropriate tests. So, there is a practical need for us to comprehensively handle the planning, execution, and reporting of software test for finding and verifying information related to the research. In this paper, we propose a useful method for software test process in R&D project which supports model based software testing. The proposed method supports automation of test design and generation of test data by explicitly separating each step of System Under Test (SUT). The method utilizes the various models representing the control flow of the function to extract the information necessary for testing the system. And it supports a systematic testing process based on TMMi and ISO 29119. Finally, we show the validity of the method by implementing a prototype with basic functionality to generate test data from software behavioral models.

• 기술혁신학회지
• /
• 제1권3호
• /
• pp.299-312
• /
• 1998

This paper explores the possibility of improving R&D management system through researchers' satisfaction analysis. The relationship between job satisfaction and performance has traditionally been one of the engaging topics in organization psychology. However, the research results of the past showed the relatively low level of correlation between satisfaction and performance at the individual level. In contrast to these past research results, recent research results on this relationship at the organizational level revealed the higher correlation between these two factors, The present study extends this 'satisfaction and performance' hypothesis to the development and improvement of R&D management system. That is, we used the results of researchers' satisfaction analysis to devise appropriate criteria for the design and implementation of more effective R&D management systems. This paper seeks to show that we can make fruitful use of researchers' satisfaction analysis in order to choose a more effective one among alternative R&D management systems.

• International Journal of Quality Innovation
• /
• 제6권3호
• /
• pp.121-131
• /
• 2005

Six Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as the process of a solving problem. Enterprises already propelling Six Sigma successfully, such as Motorola, GE and consulting companies, also traditionally propose DMAIC methodology. But, from activating Six Sigma, enterprises and Six Sigma-consulting companies propose Six Sigma methodology matching indirection part of office and R&D part. As an example, DFSS (Design For Six Sigma) is part of R&D application in GE. This study investigates Six Sigma methodology corresponding to the Right Process of the kernel factor. Especially for the optimum design of R&D, the study revises the definition of DFSS and the general organization through Lean DFSS methodology research and analysis.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.431-436
• /
• 2006

6 Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as process of solving problem. Enterprise already propelling successfully 6 sigma such as Motorolla, GE and consulting companies leading 6 sigma also propose DMAIC methodology traditionally. But from making 6 sigma activated, enterprises and 6 sigma consulting companies propose 6 sigma methodology matching office indirection part and research and development part. As the forward example, DFSS(Design For Six Sigma) is R&D part application in GE. This study investigates 6 sigma methodology corresponding to Right Process of the kernel factor. Especially for optimum design of the R&D part, revise DFSS definition and general concept organization through Lean DFSS methodology research and analysis.

• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.1-5
• /
• 2016

At present, FSW(friction stir welding) process is being considered as an actual way for production of various industrial products. However FSW process involves high temperature and load on the tool during welding. These are make a difference between FSW machine and general machine tools. From this reason, development of FSW machine needs very careful consideration on stiffness of machine structure, spindle and moving axis including machine control system. In this study authors investigate on the trends of technology development of FSW machine in order to share the information for more extension of FSW technology with related researchers and engineers.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.205-206
• /
• 2006

A ball-shape alumina arc-tube for low-wattage lamp was developed by the PIM process. An ultra high purity translucentgrade alumina powder was used. In injection molding process, a hot-runner type mold was developed. The translucent-grade alumina powder was extremely sensitive to contamination so that the injection molding condition and atmosphere control in the furnace should be taken care of with extreme caution. Contamination sources were pinpointed with EPMA. The arc-tube was molded in half and two halves were bonded in the middle by a new bonding technique at room temperature developed in this study.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.35-40
• /
• 2016

Recent developments of Laser metal 3D deposition with wire feeding are reviewed which provide an alternative to powder feeding method. The wire feeding direction, angle and position as well as laser power, wire feeding rate, and deposition speed are found to be key parameters to make quality deposition with high throughput. When compared with the powder feed, the wire feed shows higher material efficiency, higher deposition rate, and smoother surface. Large elongated columnar grains which have epitaxial growth across deposit layers are observed in deposit cross sections. The growth direction is parallel to the thermal gradient during the deposit process. Tensile properties are found to be dependent on the direction due to the anisotropic deposit property. A real-time feedback control is demonstrated to be effective to improve the deposition stability.

• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.91-97
• /
• 2019

Recently, UAV manufacturers are developing UAV system in a form that can be controlled by CS regardless of UAV kind and using STANAG 4586 interface standard considering Interoperability. STANAG 4586 is a NATO military standard developed to control various UAVs with standardized equipment. In such a case, UAV handover will inevitably occur and it is one of the most important function for safe UAV flight in platform using STANAG 4586. In the future combat situation where collaboration between AV and UAV is anticipated, seamless handover of UAV is a part of continuous research. In this paper, we propose requirements for UAV handover based on ARP 4761 safety assessment and analyze feasibility of the requirements by comparing UAV handover process in STANAG 4586. As a result of the comparative analysis, the proposed handover requirements based on ARP 4761 includes all the handover procedures of STANAG 4586 and present additional considerations for SOP creation and CS development. Applying the proposed handover requirements in the UAV development process can reduce the probability of loss of UAV control over the handover process and it can be expected to help improve the safety of UAV.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.369-375
• /
• 2004

Gas turbine engine simulation in terms of transient, steady state performance and operational characteristics is complex work at the various engineering functions of aero engine manufacturers. Especially, efficiency of control system design and development in terms of cost, development period and technical relevance implies controlling diverse simulation and identification activities. The previous engine simulation has been accomplished within a limited analysis area such as fan, compressor, combustor, turbine, controller, etc. and this has resulted in improper engine performance and control characteristics because of limited interaction between analysis areas. In this paper, we propose a new simulation methodology for gas turbine engine performance analysis as well as its digital controller to solve difficulties as mentioned above. The novel method has particularities of (ⅰ) resulting in the integrated control simulation using almost every component/module analysis, (ⅱ) providing automated math model generation process of engine itself, various engine subsystems and control compensators/regulators, (ⅲ) presenting total sophisticated output results and easy understandable graphic display for a final user. We call this simulation system GT3GS (Gas Turbine 3D Graphic Simulator). GT3GS was built on both software and hardware technology for total simulation capable of high calculation flexibility as well as interface with real engine controller. All components in the simulator were implemented using COTS (Commercial Off the Shelf) modules. In addition, described here includes GT3GS main features and future works for better gas turbine engine simulation.

• Korean Chemical Engineering Research
• /
• 제61권2호
• /
• pp.217-225
• /
• 2023

화장품, 비료 등 다양한 분야에서 사용되는 2,3-butanediol (2,3-BDO) 는 고부가가치 물질로 그 수요가 점차 증가하고 있다. 미생물의 발효로부터 생산된 2,3-BDO는 발효의 부산물을 포함하고 있을 뿐만 아니라 발효 조건에 따라 피드 조성의 변동이 심하여 생산물의 목표 순도에 도달하기 위한 분리 공정의 효율적인 운전이 어렵다. 따라서 본 연구에서는 바이오 기반 2,3-BDO 증류 공정의 동적 최적화를 통해 피드의 농도가 변화할 때 하단 생산물의 2,3-BDO 농도를 99 wt% 이상으로 제어할 수 있는 최적의 제어 경로를 탐색하였다. 정상 및 동적 상태 공정 모사와 Proportional integral (PI) 제어기 설계 후 동적 최적화를 차례로 수행하였다. 그 결과 하단 생산물의 2,3-BDO 농도와 설정점 사이의 오차가 75.2% 감소하였다.