• 멤브레인
• /
• 제21권2호
• /
• pp.163-170
• /
• 2011

수처리 분리막 공정에서 막 오염 제어 기술은 현장 적용 기술 및 경제성 확보에 있어 매우 중요하다. 본 연구에서는 형광 나노 입자 및 형광 분광 분석법을 도입함으로써 수처리 분리막 공정에서 막 오염 정도를 실시간으로 측정 모니터링 할 수 있는 센싱 기술을 개발하고자 하였다. 막 오염 정도를 모니터링 할 수 있는 분리막 제조를 위해 세 종류의 형광물질 OB, FP, KCB를 담지한 다공성 polysulfone (PSf) 비대칭 막을 제조하였다. 형광 분광 분석 시스템을 이용하여 분리막 표면에서의 오염 정도를 실시간으로 측정한 결과, 형광 물질을 첨가한 막은 막 오염이 진행됨에 따라 형광 신호가 크게 감소함을 보여 막 표면 오염층의 모니터링 분석이 가능함을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제2권1호
• /
• pp.97-103
• /
• 1999

The power curve during rubber mixing presents useful information for the understanding of rubber mixing process, because the power curve is determined the mixing state of rubber at the point. The time to the second peak on the power curve is known as carbon black incorporation time, BIT. This study gets the quantity relationship of BIT and viscosity of natural rubber, so by determining the mixing time of the compound on the ground of viscosity of the raw rubber. The mixing with natural rubber and carbon black is examined for various grade natural rubbers, encompassing a wide range of Mooney viscosity. Alter smoothing the mixing power curve using a polynomial, the carbon black incorporation time, BIT, was determined time to second power peak on the curve, The BIT's versus specific values on Mooney viscometer test curve show a linear relation, Especially, the peak of initial maximum torque on Mooney viscometer curve, PMT, is most relevant property relating to the BIT. PMT is useful index for determined optimum mixing time, To apply this results at the mixing, we effectively control the natural rubber mixing but can also know the grading of natural rubber upon processability.

• 기술사
• /
• 제24권5호
• /
• pp.129-137
• /
• 1991

기업에서 TQC를 추진할 경우 그 활동의 일환으로 제일 먼저 실시하는 것이 QCC 활동이다. 그래서 QCC활동이 성공하지 못하면 TQC가 성공하지 못한다는 결론을 미리내고 QCC활동 활성화에 역점을 두어 교육훈련에 지원을 아끼지 않는다. 그러나 국내소개된 TQC 관련자료로서 건설업에 관련된 내용은 전무한 상태이고, 모두가 제조업 위주의 자료로 구성되어 일부건설업에서는 QCC 활동에 배타적인 반응을 보이기도 하였다. 그래서 당사 및 일부회에서는 일본건설업체를 통하여 번역 자료물을 이용한 교재를 자체 제작하여 보급하였다. 그러나 문제는 바로 여기에 있다고 본다. 일본의 경우는 가장 기본적인 QCC 활동의 특징을 업체자체적으로 연구개발하였으나, 우리나라는 기본이념을 망각하고 일본 것을 답습했기 때문에 결과적으로 실패로 끝났다 해도 과언이 아니다. 다시말해서 과정보다는 결과만을 중시하였기 때문이다.

• 한국해양공학회지
• /
• 제24권6호
• /
• pp.71-75
• /
• 2010

Although Graphite Compacted Vermicular (GCV) was first observed in 1948, the narrow range for stable foundry production precluded the high volume application of GCV to complex components such as cylinder blocks and heads until advanced process control technologies became available. This, in turn, had to await the advent of modern measurement electronics and computer processors. Following the development of foundry techniques and manufacturing solutions, primarily initiated in Europe during the 1990s, the first series production of GCV cylinder blocks began during 1999. Today, more than 40,000 GCV cylinder blocks are produced each month for OEMs, including Audi, DAF, Ford, Hundai, MAN, Mercedes, PSA, Volkswagen, and Volvo. Given that new engine programs are typically intended to support three to four vehicle generations, the chosen engine materials must satisfy current design criteria and also provide the potential for future performance upgrades without changing the overall block architecture. With at least a 75% increase in the ultimate tensile strength, a 40% increase in the elastic modulus, and approximately double the fatigue strength of either iron or aluminum, GCV is ideally suited to meet current and future of engine design and performance requirements.

• 생약학회지
• /
• 제33권2호통권129호
• /
• pp.130-136
• /
• 2002

Melanogenesis is a physiological process resulting in the synthesis of melanin pigments, which play a crucial protective role against skin photocarcinogenesis. The heart wood of Caesalpinia sappan L.(C. sappan) has long been commonly used in Oriental folk medicines to promote blood circulation, and as an emmenagogue, analgesic or anti-inflammatory agent as well as a remedy for thrombosis. From the heartwood, many constituents have been purified and among them, brazilin and hematoxylin are two of the most abundant. This present study was designed to investigate the inhibitory effect of butanol extract from C. sappan on proliferation and melanogenesis in Melan-a cells. After 48 h treatment of these cells with various concentrations of butanol extract, the cells showed a dose-dependent inhibition in their proliferation without apoptotic cell death. Therefore, the growth retardation by the extract may be due to the cell arrest or cell differentiation. We also estimated total melanin content as a final product and activity of tyrosinase, a key enzyme, of melanogenesis in Melan-a cells. The melanin content and tyrosinase activity were deσeased in extract-treated cells in a dose dependent manner compared to control group. The butanol extract also resulted in a decrease of melanin content in ${\alpha}-melanocyte-stimulating$ hormone (MSH)-induced melanogenesis, indicating that butanol extract of C. sappan could be developed as skin whitening components of cosmetics.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권1호
• /
• pp.52-58
• /
• 2006

Single-electron transistor (SET)-based logic cells and SET/FET hybrid integrated circuits have been fabricated on SOI chips. The input-output voltage transfer characteristic of the SET-based complementary logic cell shows an inverting behavior where the output voltage gain is estimated to be about 1.2 at 4.2K. The SET/FET output driver, consisting of one SET and three FETs, yields a high voltage gain of 13 and power amplification with a wide-range output window for driving next circuit. Finally, the SET/FET literal gate for a multi-valued logic cell, comprising of an SET, an FET and a constant-current load, displays a periodic voltage output of high/low level multiple switching with a swing as high as 200mV. The multiple switching functionality of all the fabricated logic circuits could be enhanced by utilizing a side gate incorporated to each SET component to enable the phase control of Coulomb oscillations, which is one of the unique characteristics of the SET-based logic circuits.

• Journal of Biosystems Engineering
• /
• 제39권1호
• /
• pp.21-33
• /
• 2014

Background: Significant technological development and changes happened in the tractor industries. Contrariwise, the test procedures of the major standard development organizations (SDO's) remained unchanged or with a little modification over the years, demanding new tractor test standards or improvement of existing ones for tractor performance, safety, and comfort. Purpose: This study focuses on reviewing the research trends regarding performance, safety and comfort evaluation of agricultural tractors. Based on this review, few recommendations were proposed to revise or improve the current test standards. Review: Tractor power take-off power test using the DC electric dynamometer reduced human error in the testing process and increased the accuracy of the test results. GPS signals were used to determine acceleration and converted into torque. High capacity double extended octagonal ring dynamometer has been designed to measure drawbar forces. Numerical optimization methodology has been used to design three-point hitch. Numerous technologies, driving strategies, and transmission characteristics are being considered for reducing emissions of gaseous and particulate pollutants. Engine emission control technology standards need to be revised to meet the exhaust regulations for agricultural tractors. Finite Element Analysis (FEA) program has been used to design Roll-Over Protective Structures (ROPS). Program and methodology has been presented for testing tractor brake systems. Whole-body vibration emission levels have been found to be very dependent upon the nature of field operation performed, and the test track techniques required development/adaptation to improve their suitability during standardized assessment. Emphasizes should be given to improve visibility and thermal environment inside the cab for tractor operator. Tractors need to be evaluated under electromagnetic compatibility test conditions due to large growing of electronic devices. Research trends reviewed in this paper can be considered for possible revision or improvement of tractor performance, safety, and comfort test standards.

• 융합보안논문지
• /
• 제20권3호
• /
• pp.89-97
• /
• 2020

산업기술 보안 이슈는 대내외적으로 급격한 변화를 겪고 있다. 미국 등 선진국은 글로벌 가치사슬 및 해외자본 이동과 갈등을 빚으면서도 자국의 핵심 기술 보호를 위한 대응전략을 수립하고 있으며, 국내 또한 중장기 산업경쟁력 속에서 산업안보이슈를 접근하고 있다. 본 연구에서는 국내 산업보안 관련 이해관계자들을 대상으로 산업보안 생태계 정책인식 조사를 통해 주요 이슈를 도출하였다. 조사결과, 이해관계자 모두 산업보안의 중요성에 대해 인식하나 아직까지 국가전체 보안관리 역량은 낮다고 인식하고 있으며, 국가핵심기술은 국가에서 보다 책임을 지고 관리할 필요성이 있음을 제기하였다. 3라운드에 걸친 종합 델파이 조사를 기반으로 '산업보안 컨트롤타워 중심 시스템 체계화', '보안전문기업 기술력 강화 및 보안인력 양성', '인력 및 자본을 통한 기술유출 방지제도 개선', '연구개발 과정에서의 연구보안 및 선제적 기술보호 강화'를 정책개선 과제로 제시하였다. 본 연구가 산업보안 현장의 수요를 반영한 증거 기반 연구로서 관련 정책수립의 기초가 될 수 있기를 기대한다.

• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.108-113
• /
• 2017

The use of aluminum-based coagulants in water pretreatment is being carefully considered because aluminum exposure is a risk factor for the onset of Alzheimer's disease. Lightly burned-dolomite kiln dust (LB-DKD) was evaluated as an alternative coagulant because it contains high levels of the healthful minerals calcium and magnesium. An organic pore forming agent (OPFA) was incorporated to prepare porous granules after OPFA removal through a thermal decomposition process. A spray drying method was used to produce uniform and reproducible spherical granules with low density, since fine dolomite particles have irregular agglomeration behavior in the hydration reaction. The use of fine dolomite powder and different porosity granules led to a visible color change in raw algae (RA) containing water, from dark green to transparent colorlessness. Also, dolomite powders and granules exhibited a mean removal efficiency of 48.3% in total nitrogen (T-N), a gradual increase in the removal efficiency of total phosphorus (T-P) as granule porosity increased. We demonstrate that porous dolomite granules can improve the settling time and water quality in summer seasons for the emergent treatment of excessive algal blooms in eutrophic water.

• 한국재료학회지
• /
• 제21권6호
• /
• pp.327-333
• /
• 2011

Nanostructured cobalt materials have recently attracted considerable attention due to their potential applications in high-density data storage, magnetic separation and heterogeneous catalysts. The size as well as the morphology at the nano scale strongly influences the physical and chemical properties of cobalt nano materials. In this study, cobalt nano particles synthesized by a a polyol process, which is a liquid-phase reduction method, were investigated. Cobalt hydroxide ($Co(OH)_2$), as an intermediate reaction product, was synthesized by the reaction between cobalt sulphate heptahydrate ($CoSO_4{\cdot}7H_2O$) used as a precursor and sodium hydroxide (NaOH) dissolved in DI water. As-synthesized $Co(OH)_2$ was washed and filtered several times with DI water, because intermediate reaction products had not only $Co(OH)_2$ but also sodium sulphate ($Na_2SO_4$), as an impurity. Then the cobalt powder was synthesized by diethylene glycol (DEG), as a reduction agent, with various temperatures and times. Polyvinylpyrrolidone (PVP), as a capping agent, was also added to control agglomeration and dispersion of the cobalt nano particles. The optimized synthesis condition was achieved at $220^{\circ}C$ for 4 hours with 0.6 of the PVP/$Co(OH)_2$ molar ratio. Consequently, it was confirmed that the synthesized nano sized cobalt particles had a face centered cubic (fcc) structure and with a size range of 100-200 nm.