• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.559-570
• /
• 2015

As national R&D is increased in scale, technology transfer has garnered more attention in terms of utilizing R&D outcomes. In this study, we analyzed influencing factors to technology transfer, as a way of utilizing R&D results, using data on national R&D. The analyses was performed with 3 subjects: university, government research institute and industry. When royalty is used as a dependent variable to measure the performance outcomes of technology transfers, the analysis showed that R&D funds have positive influence on all three subjects. In terms of government research institute, the influence was significant whether the location is the capital area or Daejeon city. With regards to industry, factors such as whether the project is a cooperative research, applied research, and the research to technology transfer period were found to have remarkable influence. On the other hand, when the number of cases of technology transfer was used as a dependent variable, the analysis indicated that R&D funds have significant impact on university, while for government research institute, the significant influencing factors include both R&D funds and the research to technology transfer period, and for industry have positive influence on applied research. It is therefore necessary to make differentiated policies considering the R&D organizations in order to improve the efficiency of technology transfer performance.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.237-246
• /
• 2021

This study aims to analyze short sleeve cycling tops from three brands for a change in garment fit and pressure depending on the static and cycling postures. To this end, it used a 3D virtual garment system to virtualize the garments. Further, a cross-section of the 3D virtual garment data was obtained, and the space length was measured in the design-X program to prove the objectivity of the 3D virtual garment. The results indicated that three brands had a large space length at the front than the back because of the bent posture in cycling. Therefore, appropriate ease was required for the waist and abdomen. Although there were various cutting lines of the bodice panel by brand, the design of the cutting lines should consider the changes in the surface to reflect the bent posture in cycling. The results of this experiment confirmed that the wrinkles present in the 3D virtual garment were reflected in the cross-section and that the space length was small in the high-stress area, as shown in red. Therefore, it was proven the stress of the 3D virtual garment could be used for 3D virtual garment evaluation.

• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.54-61
• /
• 2019

Objectives: In this study, we investigated an assessment for exposure levels of hazardous substances to kids cafes that unregulated by law. Methods: Heavy metals, volatile organic compounds, formaldehyde, pesticides and phthalate were measured at 20 kids cafes in Gyeonggi-do and Incheon. Samplings were conducted from April to July in 2018. Results: Heavy metals were detected over the standard mainly around the floor and walls in the 19 kids cafes. Pesticides were detected in 7 locations with chlorpyrifos, diazinon and cypermethrin, and showed the highest detection level of chlorpyrifos. The concentrations of DEHP in all kids cafes were exceeded with standard. The risk assessment results showed that HCHO as carcinogen had a safety level and DEHP as non-carcinogens had a safety level as assessed to be under than 0.1. Conclusions: Considering the exposure investigation results and the importance of child health protection, kids cafe should be included in the legal management list of children's activities zones.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1255-1258
• /
• 2008

Roll to roll (R2R) system, known as 'web processing', is the process of producing these electronic devices on a roll of flexible plastic. With the need of improved performance and productivity in R2R industry, effective control and on-line supervision for web quality is essential. In this report, we present a system for on-line measurement of wrinkles, one of defects incurring due to compressive stresses developed in the web. This system is able to capture an image generated when a well defined line shape laser beam passes through a transparent web. The system calculates 3D shape information, including the height of the wrinkle on the web, and displays the images for the shape information of the web in real time. By using area scan camera and machine vision laser, this system takes more advantages of setting up as a simple and low cost system compared to the line scan camera systems that widely used in web manufacturing. Specific calibration method and analysis on the achievable accuracy will be discussed.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.1-14
• /
• 2023

To secure national future competitiveness, the Korean government announced the 『National Ultra-High Performance Computing (HPC) Innovation Strategy (2021.5.28.)』 and set three innovation strategy goals throughout establishing an innovation ecosystem. This study presented a heterogenous data-based strategic support framework that allowed to understand both the current status of domestic & foreign R&D areas and domestic industrial economy areas in terms of strategic fields related to ultra-high performance computing, and the empirical research was conducted in the life science and public health area. The HPC innovation ecosystem platform based on the connection of heterogeneous data (domestic R&D project-technology-industry-overseas R&D project) presented in this study provided useful and essential information that allowed establishing a specific action plan for the national HPC innovation strategy and contributing to vitalizing the innovation ecosystem. Since the evidence-based policy assumes that a more reasonable consensus is reached through a non-biased decision- making process among stakeholders, the proposed platform may contribute to enhancing policy momentum by increasing legitimacy and trust of planning of the national HPC strategy.

• Journal of the Korean Regional Science Association
• /
• v.31 no.1
• /
• pp.43-63
• /
• 2015

This study empirically analyzes the relationship between market structure and R&D activities. Especially, the outcome of R&D activities could be imitated or plagiarized by nearby competitors before it is protected legally through patenting, it would work as a club good and its market structure need to be defined at the geographic level of city, county or ward rather than the whole nation. According to the regression results of this study using Survey on Technology Statistics of Small- and Medium-Sized Firms, individual firms' R&D investment is more active when market structure of area(city, county, or ward)-industry(two-digit industry) is monopolistic or oligopolistic rather than competitive. However, as the variable representing market structure is redefined over a geographic scope of 16 metropolitan areas or provinces, 6 regions, or the whole nation, the relationship between market structure and R&D activities seems to become weak. Moreover, when the R&D expenditure is divided by its source, more active R&D spending in a less competitive market is observed as long as it is procured by internal fund of the firm in question.

• Journal of Korean Institute of Industrial Engineers
• /
• v.4 no.1
• /
• pp.5-10
• /
• 1978

In this paper it was attempted to design a system for the effective development of electronics industry by use of systems management concept. For the design of this system, current status of electronics industry was analyzed; problem area was derived through this analysis and developmental strategy was determined. As an organization for centeralized coordination, "Electronics Industry Committee" was proposed. The committee controls three specialized organizations such as R&D center, marketing management center, and council for political support. Each function of these special organizations was introduced and special role as a system manager was described.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1320-1323
• /
• 2002

This paper reviews the Korean government’s selection process of core wireless communications technologies, and presents technology trends, perspectives and strategies of 5 core technologies to develop in wireless communications areas based on the mid term IT technology development plan(2002∼2004). Delphi Panel Method and Analytic Hierarchy Process(AHP) Analysis were adapted to select 30 core technologies in 9 strategic areas. Especially, 5 core wireless communications technologies out of 24 required technologies are selected: 4 G Core Technology, Broadband Wireless Access Network Technology, IMT-2000 Plus STP Technology, OBP Based Multimedia Satellite Communications Technology, Stratosphere Communications System Technology. Strategic national IT R&D program has been essential to continue success story of CDMA technology, and acquiring technology independency from advanced nations. In long term perspectives, a strategy of intensive investment with prudent selection onto core technologies should be deployed in the IT R&D programs. Also, the national IT R&D programs should be limited in the high risk & high returen areas where only government can afford the failures as well as better spill over effects are expected for the technology development and national economy. Korean industry has some strength in wireless communications technology area. Therefore, more policy concerns should be given into this area not only to secure present strength but also to explore better technology competitiveness.

• Journal of Digital Convergence
• /
• v.9 no.3
• /
• pp.133-144
• /
• 2011

The purpose of this study are as follows. First, to analyze relative LQ index of the No. of game company, the No. of employee and the amount of revenue. Second, to analyze personal competence, resource competence, performance competence, network competence and environmental competence of regional game contents R&D. The results are as follows. The LQ index results of company are highest in seoul and Kyunggi area' And In case of except of seoul & kyunggi, the competence of R&D which is daekyung, dongnam, chungcheong are in order. In case of 5 game R&D competence, chungchung, seoul & kyunggi, honam region are in order. The core competence of chungchung region are ideal venture ecosystem among inter-supportive R&D research center, ETRI, university and company.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.10
• /
• pp.1161-1168
• /
• 2014

As rapidly growing industry, ICT industry is emphasized for its importance and the demand to figure out for the performances of investment of R&D for ICT have been increasing. The performance for investment of R&D analyze mainly as commercialization, sales, hiring employee and intellectual property and so on. In this paper, we propose an analytical method for performance as focusing an application time of patent that are acquired as a result after perform the national project of ICT. We classify 4 subdivision technologies and 17 detailed classification of Korean industrial standard for 35,551 item of ICT area among national R&D project. This paper proposes computational method for required time about patent's performance. As a analyzed result we verify that the activity of technology's commercialization is most active in communication as 1.2 year of ICT among national project.