• Korean Journal of Environment and Ecology
• /
• v.37 no.4
• /
• pp.259-272
• /
• 2023

This study set up 49 survey areas with an area of about 400 square meters in Abies koreana natural habitat to identify the species composition and vegetation structure of the A. koreana forest in the Mt. Jiri Nation Park, conducted field surveys using phytosociological methods, and performed the cluster analysis using the Two-Way Indicator Species Analysis (TWINSPAN) and Table manipulation. Subsequently, species composition analysis using the importance value, species diversity analysis, DBH analysis, sapling analysis, and similarity analysis was conducted by each cluster type. The cluster analysis classified the A. koreana forest in Mt. Jiri into five clusters, A, B, C, D, and E. The forest was divided into two clusters, Magnolia sieboldii-Dryopteris crassirhizoma-Sasa borealis and Betula ermanii-Solidago virgaurea-Calamagrostis arundinacea. The former was classified as type A and B by Cornus controversa-Hydrangea macrophylla, and the latter was classified as type E, a typical community, and a Sorbus commixta-Rhododendron mucronulatum cluster. And the S. commixta-R. mucronulatum cluster was divided into C type and D type by Picea jezoensis-Ligularia fischeri and Ainsliaea acerifolia. Through vegetation analysis, the importance value of A. koreana, Quercus mongolica, Acer pseudosieboldianum, Fraxinus sieboldiana, and B. ermanii was highly expressed in the A. koreana forest in Mt. Jiri. Regarding species diversity, the results were similar to those reported in other studies of A. koreana forests in Mt. Jiri. The analysis of diameter at breast height (DBH) showed that A. koreana dominated all layers, and the growth of saplings was also good, indicating that the dominance of A. koreana is expected to continue for a while. However, when considering the value of biodiversity that is expected to increase and threats caused by climate change, systematic preservation and management are required to respond to various threats based on continuous monitoring.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.316-328
• /
• 2021

In this study, the leaf Na content prediction model for spring potato was established using 400-1000 nm hyperspectral sensor to develop the multispectral sensor for the salinity monitoring in reclaimed land. The irrigation conditions were standard, drought, and salinity (2, 4, 8 dS/m), and the irrigation amount was calculated based on the amount of evaporation. The leaves' Na contents were measured 1st and 2nd weeks after starting irrigation in the vegetative, tuber formative, and tuber growing periods, respectively. The reflectance of the leaves was converted from 5 nm to 10 nm, 25 nm, and 50 nm of FWHM (full width at half maximum) based on the 10 nm wavelength intervals. Using the variance importance in projections of partial least square regression(PLSR-VIP), ten band ratios were selected as the variables to predict salinity damage levels with Na content of spring potato leaves. The MLR(Multiple linear regression) models were estimated by removing the band ratios one by one in the order of the lowest weight among the ten band ratios. The performance of models was compared by not only R2, MAPE but also the number of band ratios, optimal FWHM to develop the compact multispectral sensor. It was an advantage to use 25 nm of FWHM to predict the amount of Na in leaves for spring potatoes during the 1st and 2nd weeks vegetative and tuber formative periods and 2 weeks tuber growing periods. The selected bandpass filters were 15 bands and mainly in red and red-edge regions such as 430/440, 490/500, 500/510, 550/560, 570/580, 590/600, 640/650, 650/660, 670/680, 680/690, 690/700, 700/710, 710/720, 720/730, 730/740 nm.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.531-548
• /
• 2012

To identify Cochlodinium polykrikoides red tide from non-red tide water (satellite high chlorophyll waters) in the South Sea of Korea (SSK), we improved a spectral classification method proposed by Son et al.(2011) for the world first Geostationary Ocean Color Imager (GOCI). C. polykrikoides blooms and non-red tide waters were classified based on four different criteria. The first step revealed that the radiance peaks of potential red tide water occurred at 555 and 680 nm (fluorescence peak). The second step separated optically different waters that were influenced by relatively low and high contributions of colored dissolved organic matter (CDOM) (including detritus) to chlorophyll. The third and fourth steps discriminated red tide water from non-red tide water based on the blue-to-green ratio, respectively. After applying the red tide classification, the spectral response of C. polykrikoides red tide water, which is influenced by pigment concentration as well as CDOM (detritus), showed different slopes for the blue and green bands (lower slope at blue bands and higher slope at green bands). The opposite result was found for non-red tide water. This modified spectral classification method for GOCI led to increase user accuracy for C. polykrikoides and non-red tide blooms and provided a more reliable and robust identification of red tides over a wide range of oceanic environments than was possible using chlorophyll a concentration, or proposed red tide detection algorithms. Maps of C. polykrikoides red tide in SSK outlined patches of red tide covering the area near Naro-do and Tongyeong during the end of July and early of August, 2012 and extending into from Wan-do and Geoje-do during the middle of August, 2012.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.4
• /
• pp.205-223
• /
• 2016

Objective:This study introduced the status of studies and the projects related with agricultural accident prevention carried out by the Rural Development Administration. This study was conducted to promote Korean farmers' agricultural safety activation by analyzing study trends on farmers' agricultural work safety. Background: Agriculture is one of the dangerous industries, and the agricultural accident rate is on the rise, due to recent serious aging and increased female work force. Such a phenomenon emerges as a serious problem from the social perspective, and therefore measures for farmers' healthy and safe agricultural activities and accident prevention are required. Method: This study conducted literature review related with domestic and international agricultural safety and health. This study also examined the hazard factors of agricultural labor and injuries, agricultural safety and health system and policy, support and education for farmers' safety practice, and the status of convenience tools and protection equipment, based on major study activities performed by the Rural Development Administration for recent four to five years. Results: Through the study results, the status of Korea's agricultural safety system, compensation support policy, safety education of farmers for actual practice, and diverse channels including media were confirmed. This study also presented the R&D implementation status on convenience equipment and protective gear to prevent agricultural diseases and safety accidents. Conclusion: This study found out that continuous monitoring and efforts are required to prevent accidents for the Korea's agricultural labor environment and agricultural safety, and that social bond of sympathy formation is demanded through effect analysis on the implemented projects including education and support projects. Furthermore, it can be understood that agricultural accident prevention should be carried out through shift from current government-led top down approach to bottom-up approach from itself. Application: The results of this study can be utilized as useful data for farmers' safety and health.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.273-280
• /
• 2019

BACKGROUND: The reclaimed lands for agricultural use managed by the Korean government is consisted of 17,145 hectares of lands under construction and 13,384 hectares of completed lands. In order to utilize these reclaimed lands as competitive agricultural complexes, the government is preparing to develop comprehensive development plans for multiple purposes. For rational land-use planning and soil management, information of the soil chemical properties is necessary. METHODS AND RESULTS: From 2013 to 2016, soil samples were collected from 85 representative sampling sites of the reclaimed lands and analyzed for soil chemical properties including electric conductivity (EC), pH, soil organic matter (SOM), and nutrients. The annual mean soil EC ranged from 5.1 to 8.3 dS m^-1 and have continued to decrease over the years (estimation equation with EC as dependent and year as independent variable was y =0.0736x² - 1.4985x + 9.8305, R² = 0.9753). The pH ranged from 7.3 to 7.6, which was higher than the optimum range (5.5~7.0) for agricultural soils. Soil organic matter (8 to 11 g kg^-1) was lower level than the optimum range (20~30 kg^-1). Available silicate (Av.SiO₂) ranged from 169 to 229 mg kg^-1, which was close to the minimum content (≥157 mg kg^-1) for rice paddy field. Available phosphate (Av.P₂O₅) content (24~39 mg kg^-1) was lower than the optimum range (80~120 mg kg^-1) for rice paddy field. CONCLUSION: For efficient agricultural use of reclaimed lands under government management, our results suggest that the application of organic matter and supplying deficient nutrients as well as desalinization is required.

• The Journal of Society for e-Business Studies
• /
• v.16 no.1
• /
• pp.49-70
• /
• 2011

While new service development has become one of the most popular topics among practitioners and academics, methodologies development for new service development is only in its infancy. Especially, despite the growing interests in open innovations that effectively utilize external resources for R&D, existing research on new service development methodology designed to use external resources is scant. This article proposes a new methodology to generate new service business models that utilize massive external resources in combination with internal resources using ICT. The "Open Collaboration Innovation Methodology (OCIM)" is built based upon the theory of open innovation model and social psychology theories on behavioral motivation for cooperation. The model begins with the procedures to identify external resources that meet service objectives and requirements, and suggests motivation, control and monitoring mechanisms to implement a new service model. A business case is followed to demonstrate the use of the model. We expect that this model can be practically used by companies that are planning for developing new business models, and will provide a better understanding on open collaboration models, collective intelligence and crowd sourcing models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5763-5768
• /
• 2014

Maintaining a voice color is important when compounding both the normal voice because an emotion is not expressed with various emotional voices in a single synthesizer. When a synthesizer is developed using the recording data of too many expressed emotions, a voice color cannot be maintained and each synthetic speech is can be heard like the voice of different speakers. In this paper, the speech data was recorded and the change in the voice color was analyzed to develop an emotional HMM-based speech synthesizer. To realize a speech synthesizer, a voice was recorded, and a database was built. On the other hand, a recording process is very important, particularly when realizing an emotional speech synthesizer. Monitoring is needed because it is quite difficult to define emotion and maintain a particular level. In the realized synthesizer, a normal voice and three emotional voice (Happiness, Sadness, Anger) were used, and each emotional voice consists of two levels, High/Low. To analyze the voice color of the normal voice and emotional voice, the average spectrum, which was the measured accumulated spectrum of vowels, was used and the F1(first formant) calculated by the average spectrum was compared. The voice similarity of Low-level emotional data was higher than High-level emotional data, and the proposed method can be monitored by the change in voice similarity.

• The Journal of Society for e-Business Studies
• /
• v.18 no.4
• /
• pp.145-167
• /
• 2013

This paper proposes a method to compare planned processes with actual processes of bock assembly operations in shipbuilding industry. Process models can be discovered using the process mining techniques both for planned and actual log data. The comparison between planned and actual process is focused in this paper. The analysis procedure consists of five steps : 1) data pre-processing, 2) definition of analysis level, 3) clustering of assembly bocks, 4) discovery of process model per cluster, and 5) comparison between planned and actual processes per cluster. In step 5, it is proposed to compare those processes by the several perspectives such as process model, task, process instance and fitness. For each perspective, we also defined comparison factors. Especially, in the fitness perspective, cross fitness is proposed and analyzed by the quantity of fitness between the discovered process model by own data and the other data(for example, the fitness of planned model to actual data, and the fitness of actual model to planned data). The effectiveness of the proposed methods was verified in a case study using planned data of block assembly planning system (BAPS) and actual data generated from block assembly monitoring system (BAMS) of a top ranked shipbuilding company in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.497-510
• /
• 2018

In this study, the decay resistance of larch wood, which was heat treated by superheated steam, was evaluated by the field decay test. During the field decay test of 12 months, non-treated wood has been severely damaged by termite, however, no visible damage has occurred in the preservative-treated wood and superheated steam heat-treated wood. Results of field decay test showed approximately 5% mass loss of the non-treated wood and the preservative-treated wood, and approximately 1% mass loss of the superheated steam heat-treated wood. After the field decay test for 12 months, the residual amount of preservatives remaining in the preservative-treated wood was lower than that before the field decay test. It was considered that the preservative was partially eluted during the field decay test, and the mass loss of the preservative-treated wood was thought to be similar to that of the non-treated wood. Through this study and additional long-term monitoring test, superheated steam heat treatment can be considered to be an environmental-friendly method to enhance the decay resistance of wood against rot fungi and/or insect without chemical treatment such as preservative injection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.382-390
• /
• 2018

This study developed a model to evaluate the quality management system of a medical device manufacturing company, and applied it to medical device manufacturers to understand the impact on business performance in response to international regulations and industry's change. This study prepared preliminary items, defined four (4) major factors (Plan-Do-Check-Act) that consist of the evaluation layers and items per category according to prior research review and expert interview, and calculated the weight and importance using AHP. The study results showed that responsibility & authority and quality objective in Planning Category, product-related requirement and R&D in Doing Category, Measuring and monitoring in Check Category, and review of meeting Regulatory and regulation in Action Category are relatively more important factors. The evaluation model developed based on the calculated weight and importance to business performance was applied to medical device manufacturers to investigate and analyze the implementation level of QMS and its impact on business performance according to each category. Most medical device manufacturers to be studied showed a reasonable level of QMS and effective business performance. Almost all the evaluation layers and items in the four (4) factors had a significant influence on business performance. Although the medical device quality management system is aimed mainly at license acquisition, it is important that management environment factors not related directly to licensing and authorization are important to business performance, and it is effective when these factors are integrated and operated within and outside the manufacturer.