• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.138-145
• /
• 2007

The effects of amylopectin and hydrocolloid (locust bean gum and guar gum) content on wheat flour dough and noodle properties were investigated. As the amount of amylopectin increased, the water absorption rate (farinograph), the tension (tension test), the gel stability (freeze-thawing treatment), and the springiness and the cohesiveness (TPA) increased, but the pasting temperature (RVA), the lightness and yellowness (color measurement), and the hardness (TPA) tended to decrease. In sensory evaluations, the scores for cohesiveness, springiness, and acceptability of cooked noodle increased as the proportion of amylopectin increased. The proper combination of amylose/amylopectin ratio and hydrocolloids improved the freeze-thaw stability and the sensory acceptability of wheat flour dough and noodle.

• Korean journal of applied entomology
• /
• v.49 no.3
• /
• pp.219-226
• /
• 2010

This paper presents the occurrence and damage characteristics of the rice leaf-folder populations in the paddy fields of Dangsu-dong, Suwon from 2004 to 2007, and also reports the insecticide response of rice leaf-folder populations, which were collected from 2005 to 2006 in Korea and Vietnam. Laboratory measurements of the head capsule width and body length data enabled the identification of the rice leaf-folder larva stages collected in the field. The rice leaf-folder population in Suwon from 2004 to 2007 has a clear pattern consisting of two different group: the low and high density years. During the low density years (2004 and 2006), only one adult peak was noted in late August, with the damaged-hill percent less than 10% in late July, and the damaged-leaf percent around 2% in September. In contrast, during the high density years (2005 and 2007), two adult peaks were noted in early August and mid-September, with the damaged-hill percent was around 30% in late July, and the damaged-leaf percent 15 to 30% in September, which was beyond the economic injury level of rice leaf-folder. High correlations existed between the occurrence of rice leaf-folder in late July and early August and damages to rice during September. Based on these results, we suggest that the information on the rice leaf-folder population monitored by the adult density or damaged-hill percent in late July and early August would be very useful for predicting the damages later in the season for aiding in decision-making for timely control. In addition, the regional populations of rice leaf-folder showed the similar responses to the insecticides tested: high susceptibility to IGRs (tebufenozide and methoxyfenozide) and organophosphates (chlorpyrifos-methyl, pyridaphenthion), but relatively low to cartap.

• Korean Journal of Environmental Biology
• /
• v.17 no.4
• /
• pp.439-448
• /
• 1999

To investigate the population dynamics and survival of Genus Vibrio, population densities of aerobic saprophytic bacteria and Vibrio groups were measured 4 times in the intertidal waters of the Yellow Sea near Kunsan from November, 1997 to June, 1998. The distribution of heterotrophic bacteria during the survey periods by plate count and direct count method ranged from 1.2$\pm$0.6$\times$10$^3$~2.0$\pm$1.5$\times$10$^4$CFU ml­$^1$and from 6.0$\pm$4.0$\times$10$^{5}$ ~1.9$\pm$1.5$\times$10$^{7}$ cells ml­$^1$, respectively. Vibrio groups were distributed in the range of 1$\times$10 and 6$\pm$2.2$\times$10$^2$CFU ml­$^1$. The proportion of Vibrio groups to total heterotrophic bacteria was between 0.1 and 6% during the survey periods. A total of 51 isolates was obtained from TCBS agar plates and identified to species level by Biolog Identification System$^{TM}$. As a result, dominant genera were V, mediterranei, V aitguillarum, tr metschnikovii, and V. parahaemolyticus, and isolates were clustered into 26 groups based on the relatedness of average linkage clustering method at 70% level. As for the susceptibility of 51 isolates to 7 kinds of antibacterial agents (gentamicin, ampicillin, chlorarnphenicol, streptomycin, kanamycin, tetracycline, carbenicillin), 96% of isolates showed high resistance to more than one antibiotics and 65% of isolates contained a plasmid, of which size was observed greater than 12 kb, The number of cells of 3 tested strains (V. anguillarum, V. vulnificus, and V. metschnikovii) in filtered aged seawater decreased by approximately 1 to 5 orders of magnitude during 30-d incubation. In most cases, the numbers of cells decreased rapidly until day 3, then decreased slowly by day 30. The number of cells incubated at 15$^{\circ}C$ showed higher survival than those at 4$^{\circ}C$ and $25^{\circ}C$. These results may be considered for the basic supporting data in the risk assessment of vibriosis in summer.r.

• Journal of Dairy Science and Biotechnology
• /
• v.27 no.2
• /
• pp.7-16
• /
• 2009

Appenzeller cheese samples were prepared by addition of 0.5, 1.0, and 2.0% green tea (Camellia sinensis, CS) powder and control cheese. We examined various quality characteristics of the novel cheese, such as viable-cell counts, pH, water-soluble nitrogen (WSN), non-casein nitrogen (NCN), non-protein nitrogen (NPN), and catechin level during maturation for 16 weeks at $14^{\circ}C$. To develop a Korean natural cheese containing green tea powder, we also analyzed the changes in the polyacrylamide gel electrophoresis pattern, chemical composition, and sensory qualities. The viable cell counts of the samples were not significantly different. Until the $3^{rd}$ week, the pH of the CS cheese decreased with an increase in the maturation time. However, the pH gradually increased by the $12^{th}$ week, while WSN, NCN, NPN also increased. The WSN, NCN, NPN, and catechin values for the CS cheese samples were significantly higher than the values for the control cheese. The polyacrylamide gel electrophoretic pattern of caseins for the CS cheese indicated that this cheese degraded more rapidly than the control cheese did. In the sensory evaluation, cheese with 1.0% CS powder showed the highest scores in taste and appearance and good scores in flavor and texture. These results indicate that 1.0% CS is the optimal value for addition to cheese, and cheese containing 1.0% CS shows good physiological properties and reasonably high overall sensory acceptability.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.173-185
• /
• 2018

Effects of three different types of dispersions and flow improving additives composed with fatty acid esters, fatty acid metal salts and amide compound on the vulcanization and the mechanical properties properties of rubber compounds of EPDM and carbon black as fillers. were investigated using Mooney viscometer, moving die rheometer, hardness tester, and universal test machine. The aging characteristics of vulcanized EPDM compounds were also investigated. The Mooney viscosity measured at $125^{\circ}C$ showed a tendency to decrease in the order of amide type> metal salt type > ester type additive. Scorch time showed little or no difference with the addition of ester or metal salt type additives, but the amide type additive shortened a scorch time more than one minute. Rheological measurement data obtained at $160^{\circ}C$ showed that the vulcanization time was faster for metal salt type and amide type additive systems. Delta torque values of EPDM compound increased with metal salt type and amide type additives, but slightly decreased with ester type additive. The tensile strength of the EPDM compound was greatly improved when an ester type additive was added, but the amide type or metal salt type additive had no significant effect. The elongation was significantly improved for metal salt type additive, while the rest were not significantly affected. The tear strength of the EPDM compounds increased with the addition of all kinds of additives, and it increased remarkably in the case of metal salt type additive. Hardness of the EPDM compounds was nearly same value regardless of additive types. The thermal aging of the EPDM blend at $100^{\circ}C$ for 24 h showed little change in the case of metal salt type or amide type additive, but the elongation tends to decrease by 10-20% for all EPDM compounds containing additives.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.400-410
• /
• 1999

Five experiments were conducted using finishing pigs (PIC L326 sires $\times$ C15 dams) to examine the effects of expander operating conditions on nutrient digestibility in finishing pigs. The effects of different expanding conditions (0, 11.7, 24.4, $32.5kg/cm^2$) for corn-SBM based diets (Exp. 1), wheat meddlings diet (Exp. 2), sorghum-SBM based diets (Exp. 3) and wheat-SBM based diet (Exp. 4). Exp. 5 was conducted as a $2{\times}4$ factorial arrangement and factors examined were 2 soy products (raw soybean and SBM) and 4 expanding conditions (0, 14.1, 28.1, $42.2kg/cm^2$). In experiment 1, total production rates (p>0.10) were similar among treatments. The amount of fines decreased (cubic effect, p<0.001) as cone pressure was increased from 0 to $11.7kg/cm^2$, with smaller differences as cone pressure was further increased to $35.2kg/cm^2$. Nutrient digestibilities increased (p<0.02) as the feed was subjected to higher cone pressures. Digestibilities of DM, N, and GE were maximized at $24.4kg/cm^2$ cone pressure. The DE of the diet expanded at 24.4 and $35.2kg/cm^2$ increased by 172 and 109 kcal/kg, respectively, compared to the diet processed at $0kg/cm^2$ cone pressure. In experiment 2, total production and screened pellets production rates were similar among the processing treatments (p>0.21). The amount of fines decreased (quadratic effect, p<0.03) by 9 kg/h as cone pressure was increased from 0 to $11.7kg/cm^2$. Digestibilities of DM (p<0.02), N (p<0.001), and GE (p<0.002) were increased as cone pressure was increased from 0 to $35.2kg/cm^2$. DM, N, and GE digestibility in the pigs fed the midds-based diet increased by 8, 13, and 10%, respectively, at the highest processing cone pressure compared to the diets without any cone pressure. In experiment 3, the conditioned mash moistures for the treatments were numerically similar around 15% moisture. As the expander cone pressure was increased from 0 to $11.7kg/cm^2$, energy consumption for the pellet mill decreased (quadratic effect, p<0.004) from 14.1 to 12.0 kWh/t. Dry matter and gross energy digestibility increased (cubic effects, p<0.006) as cone pressure was increased from 0 to $35.2kg/cm^2$ with the largest improvement occurring as cone pressure was increased from 0 to $11.7kg/cm^2$. Nitrogen digestibility increased (cubic effect, p<0.001) from 78.3 to 81.0% as the feed was subjected to the higher cone pressures, with N digestibility being maximized at $24.4kg/cm^2$ cone pressure. The DE of the diet increased (cubic effect, p<0.001) by 225 kcal/kg as cone pressure was increased from 0 to $11.7kg/cm^2$. In experiment 4, pellet moisture decreased and moisture loss increased as cone pressure was increased from 0 to $35.2kg/cm^2$. Also, starch gelatinization of the wheat-based diets increased from 16.8 to 49.1% as the diets were processed at 0 and $35.2kg/cm^2$ cone pressure. Nutrient digestibilities were not affected (p>0.18) by any increase in cone pressure. In experiment 5, pellet moisture decreased as cone pressure was increased 0 to $35.2kg/cm^2$. The amount of moisture loss for the diets expanded at $42.2kg/cm^2$ was 3.0 and 3.8% for the SBM and raw soybean (RB) diets, respectively. Starch gelatinization for the SBM diets were 19% greater than the RB diets. The RB diets had lower DM, N and GE digestibilities as compared to the SBM diets. The DE of the RB diets were lower (p<0.02) than the SBM diets. DM (p<0.06), N (p<0.02), and GE (p<0.001) digestibilities of the dietary treatments increased as cone pressure was increased 0 to $42.2kg/cm^2$.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.851-858
• /
• 2010

In this study, waste glass and bottom ash were used as basic materials in order to secure a recycling technology of by-products which was mostly discarded and reclaimed. In addition, because softening point of waste glass is less than $700^{\circ}C$ and bottom ash includes combustible material, it was possible to manufacture low-temperature sintering lightweight aggregates for energy saving at $800{\sim}900^{\circ}C$ that it is as much as 20~30% lower than sintering temperature of existing lightweight aggregates. Thermal conductivity of newly-developed lightweight aggregates was 0.056~0.105W/m. K and its porosity was 40.36~84.89%. A coefficient of correlation between thermal conductivity and porosity was -0.97, it showed very high negative correlationship. With this, we were able to verify that porosity is key factor to affect thermal conductivity. Microstructure of lightweight aggregates by $CaCO_3$ content and replacement ratio of bottom ash in the variation of temperature were that $CaCO_3$ content increased along with pore size while replacement ratio of bottom ash increased as pore size decreased. Specially, most pores were open pore instead of closed pore of globular shape when replacement ratio of bottom ash was 30%, and pore size was small about 1/10~1/5 as compared with case in bottom ash 0~20%. In addition, open pore shapes were remarkably more irregular form of open pore in $900^{\circ}C$ than $700^{\circ}C$ or $800^{\circ}C$ when replacement ratio of bottom ash was 30%. We reasoned hereby that these results will influence on absorption increase, strength and thermal conductivity decrease of lightweight aggregates.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.201-219
• /
• 2014

The Republic of Korea in the real economy to a knowledge economy, and a center of creativity and imagination in the creative economy is changing the paradigm. As the core of creating economic, creative industries with the technology and information play an important role in the industry individuals. In order to solve the problem of the polarization of the economy and high youth unemployment rate of Korea, to recognize the role of the creative industries, as objection part, dimensions pan-national and one creative companies in industries of Mobile Apps various policies that support has been promoted. Support these policies to be able to contribute to the establishment of the success of mobile apps one-person creating company, we performed this study targeting one-person company that creates mobile apps area, we conducted a demonstration study of success factors, and thus more effective and efficient in an attempt to seek out support measures. In this study, we derive a research 4 hypothesis about the success factors of one creative enterprise through literature discussion, a study was made on the basis of empirical data of one-person company that creates mobile apps. The results of the analysis, first, if the development rate of the mobile application technology is fast and a new competition associated product is appeared, it was possible to find a tendency to be higher at the performance quantitative companies. Second, if the founder is a founding for the benefit and rewarding work and come to terms with the risk, it was possible to discover tends to be higher achievement quantitative. Third, if one-person company select a target market with capture intensively, it was possible to find a tendency for higher qualitative results. Fourth, it could be found that the reliability of the contact frequency of the network related performance business environment these characteristics enterprise management strategy and act as a significant modulatory effect. Provision of information relating to management and entrepreneurship education to be one creative enterprise is required, these results suggest that there is a provision continuing need for the opportunity to be able to meet and network and reliable variety have. In this study, to take advantage to promote the elimination measures that can increase the likelihood of success of the company of institutions to support one company that creates knowledge-based, such as in the field of mobile application.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.221-228
• /
• 2012

Physicochemical properties of liquid fertilizer samples of resource organization, which are domestically produced and distributed, are analyzed. Major contents of the research results are as follows. 1. The ratio of complete decomposition for liquid fertilizer is 49% at Public Resource Center and 33% at Liquid Fertilizer Supply Center. The combined ratio of both half-decomposed and un-decomposed liquid fertilizers is over 50% at both centers. 2. The ratio of complete decomposed liquid fertilizer, 67%, is the highest in Gangwon and Gyeonggi-do area. The ratio of un-decomposed liquid fertilizer is high in Chungbuk and Chungnam area. The sum of ratios of the half- and un-decomposed is over 60% in the areas except Gyeonnggi-do and Gangwon-do. 3. As a result of regional comparison of the physicochemical properties of liquid fertilizers, concentration variation in most of the items are large, and the degree of uniformity is found to be considerably low. In particular, concentration variation in T-N and $NH_4$-N is the most noticeable. 4. The items that physicochemically correlated to the degree of decomposition of liquid fertilizer are appeared to be T-N, $NH_4$-N, $NO_3$-N, EC, $SCOD_{Mn}$, and ORP. 5. The physicochemical average values of the liquid fertilizer estimated as "complete decomposed" are appeared to be T-N 829 mg/L,$NH_4$-N 517 mg/L, $NO_3$-N 151 mg/L, $SCOD_{Mn}$ 1,205 mg/L, EC 10.32 mS/cm, ORP -117.12 mV.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.17
• /
• pp.79-114
• /
• 1974

Experiments were conducted to clarify the variations of the ecological characteristics under different day-length and temperature conditions inperilla varieties from 1972 to 1973 in the experimental fields of Crop Experiment Station, O.R.D, Suwon. Thirty-six varieties were tested in the field in 1972 under 6 growing seasons differing seeding dates. from April 5th to June 20th with 15-day interval between each seeding. Pot-experiment also were conducted in 1972 and 1973. The seeds of the 6 varieties tested were sown on May 25th. In this pot-experiment natural condition was regarded as a short-day treatment and 100-W incandescent lamps were used for long-day treatment. Three selected varieties were grown under different. temperature treatments in phytotron in Crop Experiment Station. The results obtained are summarized as follows: 1. Most varieties tested flowered around September 6. The days required to flower were shortened gradually as the planting time was delayed. 2. The varieties used were matured around October 6, but the maturity was shortened when planted early. The days required for maturity after flowering was 26 to 30. 3. The growing period was also shortened gradually when planting time was delayed. 4. Plant height was reduced when planting time was delayed. 5. There were little differences in number of valid branches among planting time I, II and III, while the branch number was reduced as the planting time was delayed. 6. The dry matter weight was gradually increased from planting time I to III, while it was rapidly decreased after planting time IV. 7. It was found that the flowering of perilla was little affected by temperature. The varieties, however, were more sensitive to day-length. 8. No clear tendency was found in the plant height, number of valid branches and dry matter weight by the time and period of day-length and temperature treatments. 9. The highest yield was obtained at planting time III(May 5th) and the yield was decreased at either earlier or later planting. 10. 1, 000 grain weight appeared to be heavier as the planting time was delayed. 11. The number of flower cluster was largest at planting time III (May 5th) and it was decreased as planting time was earlier or later than III. 12. The oil content was also highest at planting time III (May 5th). 13. Days to flowering, days to maturity and total growing period and flowering period did not affect the yield much. 14. The number of valid branches, flower clusters, 1, 000-grain weight and dry matter weight were positively correlated with yield. The relationship between these characters and yield were variable depending upon the planting time.