• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권2호
• /
• pp.1217-1233
• /
• 2017

Effective monitoring and testing during each step are essential for document verification in research and development (R&D) projects. In software development, proper testing is required to verify it carefully and constantly because of the invisibility features of software. However, not enough studies on test processes for R&D projects have been done. Thus, in this paper, we introduce a Test Maturity Model integration (TMMi)-based software field R&D test process that offers five integrity levels and makes the process compatible for different types of projects. The Software & Systems Process Engineering Metamodel (SPEM) is used widely in the software process-modeling context, but it lacks built-in enactment capabilities, so there is no tool or process engine that enables one to execute the process models described in SPEM. Business Process Model and Notation (BPMN)-based workflow engines can be a solution for process execution, but process models described in SPEM need to be converted to BPMN models. Thus, we propose an approach to support enactment of SPEM-based process models by converting them into business processes. We show the effectiveness of our approach through converting software R&D test processes specified in SPEM in a case study.

• 시스템엔지니어링학술지
• /
• 제6권1호
• /
• pp.25-32
• /
• 2010

The Test and Evaluation (T&E) process is an integral part of the Systems Engineering Process. The purpose of Test and Evaluation (T&E) in a system development is to identify the areas of risk to be reduced or eliminated. In this study, when develop aircraft of Civil Aviation with development experience of Military Aircraft, it is that establish Test and Evaluation process. Test and Evaluation for KC-100 small aircraft development can divide to certification test and development test. Certification test is proved compliance about Korea Airworthiness standard (KAS Part 23), through Development Test verify required performance of aircraft. These Test and Evaluation Process is more efficient and optimized.

• 산업공학
• /
• 제16권3호
• /
• pp.362-374
• /
• 2003

The major objective of this paper is to empirically examine the effect of process maturity on the performance of industrial R&D projects. Process maturity, a fundamental concept of the Capability Maturity Model developed by Software Engineering Institute, represents the essential of Total Quality Management (TQM). Based on literature, our research model constructs process maturity in terms of structured process, goal setting and controlling, metrics, and process learning; and links it to the R&D performance that consists of technical, commercial and managerial successes. The model also includes firm size as a moderator of different effects that process maturity may have across firms. Measures for process maturity are based on the best practices identified in literature. Data are obtained from 77 successful R&D projects carried out by Korean manufacturing firms. Multiple regression and t-test are used to test proposed hypotheses. Findings are as follows. (1) In the R&D process, process maturity partially contributes to the performance of R&D projects. More specifically, goal setting and controlling-related practices drive both technical and commercial successes, while process learning-related practices drive commercial success. In contrast, traditionally emphasized elements such as structured process or metrics are found not to be significant. (2) The degree of process maturity is significantly higher in large firms. (3) Process maturity impacts on commercial success in the case of large firms, whereas it does on technical success in the case of small firms. The results imply that the TQM principles are partially associated with R&D performance, and the nature of benefit from high maturity could vary according to firm size.

• 인터넷정보학회논문지
• /
• 제19권2호
• /
• pp.43-48
• /
• 2018

Various artifacts that are produced as software R&D project progresses contain research plan, research report, software requirements and design descriptions, etc. When conducting a software R&D project, it is necessary to confirm that the developed system has implemented its research requirements well. However, various research results make it difficult to design appropriate tests. So, there is a practical need for us to comprehensively handle the planning, execution, and reporting of software test for finding and verifying information related to the research. In this paper, we propose a useful method for software test process in R&D project which supports model based software testing. The proposed method supports automation of test design and generation of test data by explicitly separating each step of System Under Test (SUT). The method utilizes the various models representing the control flow of the function to extract the information necessary for testing the system. And it supports a systematic testing process based on TMMi and ISO 29119. Finally, we show the validity of the method by implementing a prototype with basic functionality to generate test data from software behavioral models.

• 마이크로전자및패키징학회지
• /
• 제15권1호
• /
• pp.7-18
• /
• 2008

This paper reviews the current development of an ultra-slim SiP for Radio Frequency (RF) application, in which three flip chips, additional passive components and Surface Acoustic Wave (SAW) filters are integrated side-by-side. A systematic investigation is carried out for the design optimization, process and reliability improvement of the package, which comprises several aspects: a design study based on the 3D thermo-mechanical finite element analysis of the packaging, the determination of stress, warpage distribution, critical failure zones, and the figuration of the effects of material properties, process conditions on the reliability of package. The optimized material sets for manufacturing process were determined which can reduce the number of testing samples from 75 to 2. In addition the molded underfilling (MUF) process is proposed which not only saves one manufacturing process, but also improves the thermo-mechanical performance of the package compared with conventional epoxy underfilling process. In the end, JEDEC's moisture sensitivity test, thermal cycle test and pressure cooker tests have also been carried out for reliability evaluation. The test results show that the optimized ultra-slim SiP has a good reliability performance.

• 산업공학
• /
• 제23권1호
• /
• pp.78-88
• /
• 2010

In this paper we develop a model for the performance evaluation of defense R&D test development projects based on analytic hierarchy process. First, evaluation indicators are collected through the related literature survey and a delphi inquiry method. Second, stepwise multiple linear regression is used for developing a hierarchical structure for analytic hierarchy process in the evaluation model, which can make the selected evaluation indicators of the hierarchical structure independent. Also we verify the effectiveness of proposed indicators of the performance evaluation by comparing with the existing evaluation indicators. The developed indicators for the performance evaluation is more reasonable and practical than the previous indicators on defense R&D test development projects.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1596-1599
• /
• 2009

Mobile ODF (one drop filling) portable display such as mobile phone and application product is needed high reliability than notebook, monitor and TV. Therefore, material development in order to optimize mobile & application ODF panel is needed. Through considering mobile ODF process and design, we have developed method of material matching test by several tests which is heat stress, UV stress and ODF process condition. So we have developed a material with characteristics of high reliability for mobile ODF panel.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.87-96
• /
• 2020

In this paper we proposed the test design method of reliability growth management. First, we presented the process for establishing the reliability growth management test design considering the number of failures and the termination test time. Reliability growth analysis of continuous system was performed in accordance with the test design process presented. In case the reliability test result is not met with the reliability target value after more than three failures occurred, the required test times were analyzed that 1,725 hrs for one corrective action, 1,950 hrs for two corrective actions. If the number of failures is less than three, design a reliability demonstration test according to confidence level 80% and 90% was performed using RGA 11 Software. As a result, it is possible to establish the reliability growth management test design with sufficient use of available resources. The results of this study can be used when establishing a test design for assessment of reliability growth management of all continuous systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.98-100
• /
• 1995

This paper deals with development of high torque and high accurate stepping motor and control system which is adopted heavy equipment engine speed control. In the process of development, only pure domestic technics is involved, all the parts are supplied in domestic industries, and successfully accomplished to mass production. In order to confirm product liability, circumferential test,such as vibration test impact test,thermal test,and field test are thoroughly fulfilled.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.83-88
• /
• 2019

In this study, the high-temperature high-pressure vessel was successfully manufactured, which can be used to store pressurized air and to increase the temperature for the mix performance test of high-temperature high-pressure air with coolant (e.g., water). In this research, static structure analysis and transient thermal analysis were performed using the commercial software Midas NFX 2015 R1. Based on the results, the optimized pressure vessel design was carried out. As a result of the optimized design, the minimum stress and minimum weight were found at 120 mm of the vessel thickness, and the optimized pressure vessel was verified. Finally, through manufacture and performance test (e.g., the non-destructive inspection and hydraulic pressure test), the reliability and safety were validated for the designed pressure vessel.