• Journal of Animal Science and Technology
• /
• v.47 no.2
• /
• pp.147-158
• /
• 2005

The purpose of this study was to find out the effects that daughters' incomplete lactation records affect sire's breeding values through genetic evaluation using RRTDM(random regression test-day model). First, we estimated genetic parameters and breeding values on sires having complete lactation records of daughter by RRTDM, second, we changed complete lactation records of specific sires into incomplete records by various methods. Third, the breeding values were compared between complete and incomplete records. Finally, this study aimed to find out the methods to minimize the estimation errors of young bulls' breeding values. Data used in this study were collected from the dairy herd improvement program, and a total of 97,562 records were composed of 10,929 first parity with both parents known, since 1999. Breeding values on the daughters from randomly chosen sires were calculated and compared with among 90 day, 150day, and 200 day's incomplete records. For milk yields, sire's ranks of breeding values used by complete lactation records were very different from sire's ranks of breeding values obtained by incomplete lactation records(Rank_90 cut, 150cut, 200 cut).The differences were also obtained between complete lactation records(per305_full) and incomplete lactation record (per_90 cut, 150cut, 200 cut) in breeding values regarding persistency. Especially, the differences between per_90 cut and per305_full were very large(from 1.8 kg to 145kg).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.441-447
• /
• 2002

KSR-III(Korea Sounding Rocket - III), which is being developed by Space Technology R&D Division of KARI(Korea Aerospace Research Institute) will be launched in late 2002. It is a three-stage, liquid propellant rocket which can reach 250 km altitude and will carry out observation of ozone layer and scientific experiments, such as microgravity experiment, and atmospheric measurement. KSR-III is believed to be an intermediate to the launch vehicle capable of carrying a satellite to its orbit. Space Test Department of KARI performed GVT(Ground Vibration Test) fer KSR-III EM at Rocket Test Building of KARI. GVT is very important for predicting the behavior of rocket in its operation, developing flight control program and performing aerodynamic analysis. This paper gives an introduction of rocket GVT configuration and information on test procedures, techniques and results of It. In this test. to simulate free-free condition, test object hung in the air laterally by 4 bungee cords specially devised. For the excitation of test object, pure random signal by two electromagnetic shakers was used and total 22 frequency response functions were achieved. Polyreference parameter estimation was performed to identify the modal parameters with MIMO(Multi-Input-Multi-Output) method. As the result of the test, low frequency mode shapes and modal parameters below 60Hz were identified

• Land and Housing Review
• /
• v.2 no.2
• /
• pp.145-155
• /
• 2011

It is very important for successful construction to estimate the soil volume conversion factor of domestic weathered ground accurately and reasonably. However, it is very difficult to quantify the weathering degree of weathered ground at the field, so that the soil volume conversion factor used in Korea is often dependent upon the standard of foreign countries. Besides, the soil volume conversion factor of domestic weathered ground has been rarely studied and the use and accuracy of the soil volume conversion factor have been questioned persistingly. This study suggests a simple but robust method for estimating the soil volume conversion factor and measuring the weathering degree reasonably, and attempts to establish the utilization of a soil volume conversion factor measurement system based on experimental and analytical results. We made relationship between electrical resistivity and weathering degree presented from weathering index obtained through laboratory tests using field samples, and an estimation method of in-situ weathering degree for granites and a calculation method of soil volume conversion factor using electrical resistivity. And also, we suggested the photogrametry measurement-equipment system for measuring the volume of cargo box and the application plan of stand equipment and RFID for calculating the earth volume and distinguishing buggies in order to design the measurement system for soil volume conversion factor applicable to the field. Ultimately, the Weathered Earth-work Management Program (WEMP) was developed, so field managers may easily obtain the information about earth volume and soil volume conversion factor at the weathered ground.

• Nuclear Engineering and Technology
• /
• v.27 no.1
• /
• pp.53-66
• /
• 1995

Since the current licensed system codes for Non-LOCA safety analysis are applicable only for a specific type PWR, it is necessary to develope a new system analysis code applicable for all apes of PWRs. As a R&D program, KAERI is developing TASS code as an interactive and faster-than-real-time code for the NSSS transient simulation of both CE and Westinghouse plane. It is flexible tool for PWR analysis which gives the user complete control over the simulation through convenient input and output options. In this paper the code applicability to Westinghouse ape plants was verified by comparing the TASS prediction to plant data of loss of AC power and loss of load transients, and comparing to the prediction of RELAP5/MOD3 for feedline break, locked rotor, steam generator tube rupture and steam line break accidents.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.82-88
• /
• 2020

The purpose of this study is to obtain basic data on the optimization of firing process conditions for enamel coating in chemical heat exchanger. The method of increasing the firing temperature in order to apply enamel coating to shell & tube type heat exchanger was examined. The temperature distribution of the heat exchanger in the firing kiln was numerically calculated using a commercial CFD program. The structural safety of the heat exchanger was confirmed by thermal stress analysis using the FSI method. Numerical analysis and experimental results show that there is a problem of safety due to temperature difference when the heat exchanger at room temperature is directly put into a firing kiln at 860℃. Therefore, a preheating process is need to reduce the temperature difference. As in Case2 with fewer firing steps, the first stage preheating temperature of 445℃and the second stage firing temperature of 860 ℃are considered to be most suitable.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.396-403
• /
• 2016

This study is based on the evaluation of a single component injection type adhesive repair material and a new 2 component type used in leakage of underground concrete structures. The studies showed that based on different mix ratio of the 2 component type adhesive sealant comprised of an asphalt main and latex mixture agent the viscosity of the material compound differed significantly. Based on a permeability testing, injection and economic efficiency, and performance, the appropriate ratio was determined to be 6:1 and was proceeded to the KS F 4935 evaluation method. The 2 component type adhesive sealant uses a static mixer and a cartridge type container for the injection procedure and was able to satisfy the evaluation criteria outlined in the KS F 4935 standard.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.1
• /
• pp.81-112
• /
• 1998

This study reviews the industrialization process of the United States-Mexico Borderlands and the economic relations between the U.S. and Mexico and examines their impact on the borderlands. Main factor in the industrialization of the borderlands was the U.S. investment on the maquiladora program of Mexico since 1965. It contributed to the increase in employment and population of borderlands and the development of service industries. Low wage level of Mexico induced not only standardized labor-intensive industries but also the high-tech automated industries because they still use a lot of labor in manufacturing and assembly process, while the functions of management. R & D, and distribution remained in the U.S. This is a typical case of international division of labor and satellite industrial district. The rules of origin in NAFTA, however forced branch Plants of multinational companies to form the local linkages between firms.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1404-1414
• /
• 2008

In the mechanistic-empirical trackbed design of railways, the resilient modulus is the key input parameter. This study focused on the resilient modulus prediction model, which is the functions of mean effective principal stress and axial strain, for three types of railroad trackbed materials such as crushed stone, weathered soil, and crushed-rock soil mixture. The model is composed with the maximum Young's modulus and nonlinear values for higher strain in parallel with dynamic shear modulus. The maximum values is modeled by model parameters, $A_E$ and the power of mean effective principal stress, $n_E$. The nonlinear portion is represented by modified hyperbolic model, with the model parameters of reference strain, ${\varepsilon}_r$ and curvature coefficient, a. To assess the performance of the prediction models proposed herein, the elastic response of a test trackbed near PyeongTaek, Korea was evaluated using a 3-D nonlinear elastic computer program (GEOTRACK) and compared with measured elastic vertical displacement during the passages of freight and passenger trains. The material types of sub-ballasts are crushed stone and weathered granite soil, respectively. The calculated vertical displacements within the sub-ballasts are within the order of 0.6mm, and agree well with measured values with the reasonable margin. The prediction models are thus concluded to work properly in the preliminary investigation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1035-1038
• /
• 2015

The video conference system which enables multiple users even at places away from each other proceed with the work at the same time is required to establish a convenient and efficient smart work environment. The conventional S/W-based video conference system is developed by the different implementation methods using provider's own technology and as a separate program for each OS type of user. On the other hand, the video conference system using HTML5 and WebRTC provides features of video conference system through a web browser that support HTML5 and WebRTC functions without installing any programs In this paper, in order to activate a HTML5-based video conference system in the domestic market, we propose the standard for the interworking functions that need to be supported in each system to ensure the interoperability among different HTML5-based video conference systems.

• BMB Reports
• /
• v.37 no.4
• /
• pp.493-502
• /
• 2004

The genetic diversity and species-diagnostic markers in the introduced apple snail, Pomacea canaliculata and in the native Thai apple snails; Pila ampullacea, P. angelica, P. pesmei, and P. polita, were investigated by restriction analysis of COI and are reported for the first time. Twenty-one composite haplotypes showing non-overlapping distributions among species were found. Genetic heterogeneity analysis indicated significant differences between species (P < 0.0001) and within P. pesmei (P < 0.0001) and P. angelica (P < 0.0004). No such heterogeneity was observed in Pomacea canaliculata (P > 0.0036 as modified by the Bonferroni procedure), P. ampullacea (P = 0.0824-1.000) and P. polita (P = 1.0000). A neighbor-joining tree based on genetic distance between pairs of composite haplotypes differentiated all species and indicated that P. angelica and P. pesmei are closely related phylogenetically. In addition, the 16S rDNA of these species was cloned and sequenced. A species-specific PCR for P. canaliculata was successfully developed with a sensitivity of detection of approximately 50 pg of the target DNA template. The amplification of genomic DNA (50 pg and 25 ng) isolated from the fertilized eggs, and juveniles (1, 7, and 15 d after hatching) of Pomacea canaliculata was also successful, and suggested that Pomacea canaliculata and Pila species can be discriminated from the early stages of development.