• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5534-5542
• /
• 2014

The defense industry plays a larger role than merely maintaining national security; it also has ripple effects in society, such as employment growth through increased domestic demand and advancement of industrial structures. In this study, the factors affecting the defense industry were divided into military support and government support. Previous research dealing with the correlation of management of the defense industry and each of these important factors was then investigated and analyzed. These results are believed to contribute to growth of the defense industry through building an environment that positively affects the defense industry's growth, profitability and productivity, and achieves higher business performance.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.3-10
• /
• 2014

The Japan National Committee for the Union for International Cancer Control (UICC) and UICC-Asia Regional Office (ARO) organized an international session as part of the official program of the 72nd Annual Meeting of the Japanese Cancer Association to discuss the topic "What is cost-effectiveness in cancer treatment?" Healthcare economics are an international concern and a key issue for the UICC. The presenters and participants discussed the question of how limited medical resources can be best used to support life, which is a question that applies to both developing and industrialized countries, given that cancer treatment is putting medical systems under increasing strain. The emergence of advanced yet hugely expensive drugs has prompted discussion on methodologies for Health Technology Assessment (HTA) that seek to quantify cost and effect. The session benefited from the participation of various stakeholders, including representatives of industry, government and academia and three speakers from the Republic of Korea, an Asian country where discussion on HTA methodologies is already advanced. In addition, the session was joined by a representative of National Institute for Health and Care Excellence (NICE) of the United Kingdom, which has pioneered the concept of cost-effectiveness in a medical context. The aim of the session was to advance and deepen understanding of the issue of cost-effectiveness as viewed from medical care systems in different regions.

• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.74-83
• /
• 2020

In Korea, about 110,000 LPG small storage tanks of less than three tons have been installed in restaurants, houses and factories, and are used as LPG supply facilities for cooking, heating and industrial use. In the case of combustible liquefied gas storage tanks, the tank may rupture due to the temperature increase of the tank steel plate (approximately 600℃) even when the safety valve is operating normally, causing large-scale damage in an instant. Therefore, in the event of a fire near the LPG small storage tank, it is necessary to accurately predict the timing of the BLEVE(Boiling Liquid Expanding Vapour Explosion) outbreak in order to secure golden time for lifesaving and safely carry out fire extinguishing activities. In this study, we have first investigated the results of a prior study on the prediction of the occurrence of BLEVE in the horizontal tanks. And we have developed thermodynamic models and simulation program on the prediction of BLEVE that can be applied to vertical tanks used in Korea, have studied the effects of the safety valve's ability to vent, heat flux strength of external fires, size of tanks, and gas remaining in tanks on the time of BLEVE occurrence and have suggested future utilization measures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.639-646
• /
• 2016

In this study, the contactless measurement method with a optical displacement sensor(ODS, ADNS 9500) was proposed to overcome flaws in a rotary encoder based measurement under particular circumstances, such as a slippage and a case of little rotational inertia. The performance tests of the optical displacement sensor using data acquisition board and National Instruments's LabVIEW program were performed to accomplish accurate displacement measurements and the performance characteristics according to measurement direction, speed, acceleration, height and surface types were discovered through the repetitive tests. The experimental results indicate that, in order to get an accurate in-plane motion, the height(distance between the ODS and the target surface) has to be maintained at the range of 2.4 mm to 3.2 mm and the sensitivity(resolution) should be modified and applied to the formulae for displacement calculation, considering its measurement direction, speed and surface type.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.414-420
• /
• 2005

The ShortStack Micro Server enables any product that contains a microcontroller or microprocessor to quickly and inexpensively become a networked, Internet-accessible device. The ShortStack Micro Server provides a simple way to add LonWorks networking to new or existing smart devices. . It implements the LonTalk protocol and provides the physical interface with the LonWorks communication. The ShortStack host processor can be an 8, 16, or 32-bit microprocessor or microcontrollers. The ShortStack API and driver typically require about 4kbytes of program memory on the host processor and less than 200 bytes of RAM. The interface between host processor and the ShortStack Micro Server may be a Serial Communication Interface (SCI). The LonWorks control module with a high performance is developed, which is composed of the 8 bit PIC Microprocessor for host processor and the smart neuron chip for the ShortStack Micro Server. This intelligent control board is verified as proceeding the various function tests from experimental system with an boost pump and inverter driving systems. It is also confirmed that the developed control module provides stably 0-10VDC linear signal to the input signal of inverter driving system for varying the induction motor speed. Thus, the experimental results show that the fabricating intelligent board carried out very well the various functions in the wide operating ranges of boost pump system. This developed control module expect to apply to industrial fields to require the comparatively exact control and monitoring such as multi-motor driving system with inverter, variable air volume system and the boost pump water supply systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.372-375
• /
• 2014

A monopulse based on maximum likelihood(ML) in jamming scenario can suppress jamming signal using an inverse matrix of a covariance matrix. In order to achieve adequate suppression of jamming signal, the sufficient number of snapshots is required. However, this is not possible in high PRF scenario, which hinders a real-time tracking. Moreover, even with the large number of snapshots, the estimation accuracy of the target direction is decreased in low JNR(Jammer to Noise Ratio) due to insufficient jammer suppression. In this paper, we propose a monopulse algorithm that doesn't degrade performance significantly with a small number of snapshots and in low JNR. We show its derivation that exploits noise-jammer subspace of a covariance matrix, along with its performance through simulation.

• Journal of Korean Academy of Nursing
• /
• v.36 no.8
• /
• pp.1324-1330
• /
• 2006

Purpose. This study developed a web-based wound care course for undergraduate nursing students and evaluated the course's content, system, and student-satisfaction. Methods. This study was done in three stages, the development of the web-based wound care course, the implementation and evaluation of the course. The course was developed based on the ARCS model. 80 under-graduate nursing students to Y University in Korea used the web-based wound care program during four weeks. After that, they completed questionnaires, evaluating the contents, system, and their satisfaction. Results. Eighteen learning objectives were used to create the web-based wound care course and the course was developed with 7 chapters and 20 subsections. The analysis of the questionnaires showed a mean score for content and system-related items of 3.04 each, out of a possible 4 points. Student satisfaction items had a mean score of 2.89. Conclusions. The web-based course allowed students access to the course anytime and anywhere, and according to their own learning abilities. However this advantage would only be possible when nurse educators develop qualitative web-based course to meet the demand of a complex health care system as well as the needs of the students and the effectively incorporate it into traditional lectures.

• Journal of Korean Home Economics Education Association
• /
• v.13 no.3
• /
• pp.131-146
• /
• 2001

The purpose of this study were to develop cooperative learning lesson plan for middle school home economics class and to identify the effect of cooperative learning on students\` self-esteem. The content of lesson was chosen from the food and nutrition section of home economics textbooks for middle school. The main structure of the lesson plan stems from $\boxDr$Lesson Plan Guide of Structuring Cooperative Learning Lesson Plan for Teachers$\boxUl$ by D. Johnson. R Johnson and E. Holubec. Various kinds of references including media reading materials cooperative group activity reports and cooperative group activity checking lists were newly developed according to the content of lesson. Eight hour lesson plans were developed and applied to 2nd grade middle school students and pre-test and post-test were taken to test the effect of Johnson\`s cooperative learning method on students\` self-esteem. Students at a Middle School located in Seoul were divided into two grouts, the three classes as experimental group and the other three classes as control group. The data were analyzed by ANCOVA using SPSS/WIN program. As a result, the hypothesis that the degree of self-esteem of the experimental group is higher than that of control group was adopted (P.(001). Among the sub-factors of self -esteem. the global self-esteem and the social-peer self-esteem scores of the experimental group were higher than that of the control group(p.(001 each). but the school-academic self-esteem score was not different (p> .05) According to the post-experiment free-style report. student as a dynamic subject could get initiatives and interests in home economics class more effectively by cooperative learning. Therefore, it could be said that cooperative learning has positive effect on the promotion of students\` self-esteem and is considered to be a good teaching method of home economics subject.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.2
• /
• pp.147-154
• /
• 2018

PURPOSE. This study was performed to evaluate the osteogenic potential of 3mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP) and niobium oxide containing Y-TZPs with specific ratios, new (Y,Nb)-TZPs, namely YN4533 and YN4533/Al20 discs. MATERIALS AND METHODS. 3Y-TZP, YN4533 and YN4533/Al20 discs (15 mm diameter and 1 mm thickness) were prepared and their average surface roughness ($R_a$) and surface topography were analyzed using 3-D confocal laser microscope (CLSM) and scanning electron microscope (SEM). Mouse pre-osteoblast MC3T3-E1 cells were seeded onto all zirconia discs and evaluated with regard to cell attachment and morphology by (CLSM), cell proliferation by PicoGreen assay, and cell differentiation by Reverse-Transcription PCR and Quantitative Real-Time PCR, and alkaline phosphatase (Alp) staining. RESULTS. The cellular morphology of MC3T3-E1 pre-osteoblasts was more stretched on a smooth surface than on a rough surface, regardless of the material. Cellular proliferation was higher on smooth surfaces, but there were no significant differences between 3Y-TZP, YN4533, and YN4533/Al20. Osteoblast differentiation patterns on YN4533 and YN4533/Al20 were similar to or slightly higher than seen in 3Y-TZP. Although there were no significant differences in bone marker gene expression (alkaline phosphatase and osteocalcin), Alp staining indicated better osteoblast differentiation on YN4533 and YN4533/Al20 compared to 3Y-TZP. CONCLUSION. Based on these results, niobium oxide containing Y-TZPs have comparable osteogenic potential to 3Y-TZP and are expected to be suitable alternative ceramics dental implant materials to titanium for aesthetically important areas.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.555-559
• /
• 2011

Oil hydraulic piston pumps are extensively used worldwide because of their simple design, light weight, and cost effectiveness. However, an oil hydraulic pump is likely to have high leakage, friction, and low energy efficiency after long-term use. In oil hydraulic piston pumps the clearance between the valve block and the piston plays an important role in the volumetric and overall efficiency. We studied the wear property of the SACM645 material used in hydraulic piston pumps via experiments with different heat treatments. We prepared three different specimens. The maximum tensile strengths of the QT and QT-nitration specimens are similar (about 820 MPa), but the strains are significantly different. However, the fatigue characteristic depended on the heat treatment.