• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.169-176
• /
• 2011

The two-step water splitting thermochemical cycle is composed of the T-R (Thermal Reduction)and W-D (Water Decomposition)steps. The mechanism of this cycle is oxidation-reduction, which produces hydrogen. The reaction temperature necessary for this thermochemical cycle can be achieved by a dish-type solar thermal collector (Inha University, Korea). The purpose of this study is to validate a water splitting device in the field. The device is studied and fabricated by Kodama et al (2010, 2011). The validation results show that the foam device, when loaded with $NiFe_2O_4/m-ZrO_2$powder, was successfully achieved hydrogen production with 9 (10 with a Xe-light solar simulator, 2009, Kodama et al.) repeated cycles under field conditions. Two foam device used in this study were tested for validation before an experiment was performed. The lab scale ferrite-conversion rate was in the range of 24~76%. Two foam devices were designed to for structural stability in this study. In the results of the experiments, the hydrogen percentage of the weight of each foam device was 7.194 and $9.954{\mu}mol\;g^{-1}$ onaverage, and the conversion rates 4.49~29.97 and 2.55~58.83%, respectively.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.263-268
• /
• 2016

In the polymer shaping process that uses molds, the quality of the molded products is determined not only by the flow of the (molten) polymer but also by the air venting in the cavity. Inadequate air venting in the cavity can cause defects in the product, such as voids, short shot, or black streaks. As it is critical to consider the location and size of the vents for proper venting of the air in the cavity, a method that predicts the flow of air and material is required. The venting of air by the flow of rubber inside the cavity was simulated by using a multi-phase computational fluid dynamics method. Through computer simulation, the interface of rubber and air over time was predicted. Then, the velocity and pressure distribution of the venting air were observed. Our research proposes a fundamental method for analyzing the multi-phase flow of polymer materials and air inside the cavity of a mold.

• 미생물학회지
• /
• 제30권5호
• /
• pp.410-414
• /
• 1992

난분해계 물질을 분해할 수 있는 균주 개발에 유용한 클로닝백터를 개발하기 위하여, Pseudomonas putida 로부터 유래한 R 플라스미드 pKU10 을 HindIII 로부터 부분소화하여 약 8.5 kb 의 새로운 플라스미드 pKU11 을 조립하고, 여러 숙주세포에서의 안정성 및 catechol 2, 3-dioxygenase 유전자의 클로닝 을 통해 난분해계 유전자클로닝 백터로의 유용성을 조사하였다. pKU11 은 높은 농도의 ampicilin 과 tetracyclin 에 대해서 내성을 나타내었고, P. putida TN1307 에 도입되었을 때 수세대 동안 안정되게 발현되었지만, Pseudomonas 이외의 숙주세포로서 E. coli 와 Achromobacter gr. D. V. 에 도입되었을 낮은 형질전환빈도와 불안정성을 나타내었다. pKU11 의 copy 수는 8 개로 조사되었고, pKU11 에 xylene 분해에 관련된 catechol 2, 3-dioxygenase 유전자를 클로닝 하였을 때 P. putida TN 1307 에서 잘 발현하였다. 따라서 pkU11 은 난 분해계 유전자를 클로닝하는에 Pseudomonas 에서 유용한 벡터로서 쓰일 수 있을 것으로 사료된다.

• International Journal of Advanced Culture Technology
• /
• 제6권1호
• /
• pp.23-31
• /
• 2018

The purpose of this study was to identify mediating effect of major satisfaction in the effect of critical thinking disposition on disaster recognition. For this study, 237 students of nursing students from universities in Jeollanam do participated in the study. The data collection was collected on Dec 1 to 7, 2017. The descriptive statistics was used to analyze general characteristics of participants, the differences in disaster recognition according to general characteristics were analyzed by t-test or ANOVA. Regression analysis was conducted to confirm the effect of critical thinking disposition on disaster recognition and Baron, R.M. And Kenny, D.A.'s mediation effect statistic analysis was used to confirm the mediating effect of major satisfaction in critical thinking disposition on disaster recognition. As a result, the critical thinking disposition affects the disaster recognition, and it was judged that the major satisfaction was mediating role. intellectual fairness sub-factor showed perfect mediating effect and confidence and general truth sub-factor showed partial mediating effect. Based on the above findings, it can be seen that not only critical thinking but also satisfaction with the major should be considered in order to increase the recognition of the sudden disaster. In this case, research for linking critical thinking disposition and major satisfaction is likely to be meaningful. Through the results of this study, we suggest the program development of a linkage between critical thinking disposition and major satisfaction to increase the recognition of disaster.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권4호
• /
• pp.295-300
• /
• 2011

Introduction: Hydroxyapatite(HA) coating implant can accelerate osseointegration, however, there are many controversies. Materials and Methods: This study examined the early osseointegration of two types of hydroxyapatite coated implants. Twelve adult male miniature pigs (Medi Kinetics Micropigs, Medi Kinetics Co., Ltd., Busan, Korea) were used in this study. In the implants placed in the mandible, a histomorphometric evaluation was performed to evaluate the bone-implant contact (BIC) ratio. Results: The BIC ratio increased with time. TS III HA and Zimmer HA were not significantly different (P>0.05). At 8 weeks, the BIC of Zimmer HA was higher than TS III HA, but there was no significant difference (P>0.05). Conclusion: HA coated implants will accelerate early osseointegration.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1258-1270
• /
• 2009

Recently, the earthquakes activities are more of frequency occurred in the country. In case of nomal or large magnitude earthquakes, which cause a rising number of life loss or widespread loss of property. It must be considered how to cope with the situperty of dpmage in the country ty account of ay earthquake. Consequently, the public works have currently ensured against a lot of risk about seismism not only on large scale structures but also relatively small structures. Therefore, in this study, in order to make the seismic stability safe, it has been evaluated by the seismic performance for caisson-type breakwater. The seismic response analyses have conducted on the caisson-type breaker under long-period, short-period and artificial seismic wave. The liquefaction potential of the foundation, which is caisson-type, is also estimated by using the simplified assessment method. Finally, the result of the numerical analysis by PENTAGON 2D finite element method(FEM) program are presented for 3 cases with time-history seismic analysis under the seismic load.

• 정보통신설비학회논문지
• /
• 제2권2호
• /
• pp.85-94
• /
• 2003

정부에서는 정보통신기술개발을 위해 1993년부터 정보화 촉진기금을 설치하고 "정보통신연구개발사업"을 통해 이를 집중 지원하여 왔는데 정보통신 산업발전 및 정보화촉진을 위해 $1993{\sim}2001$년간 총 5조 8,252억원을 투입하였고 출연사업으로는 3조 1,012억원을 투입하였다. 정보통신연구개발사업 중 출연사업은 정보통신분야의 기술진흥과 정보통신산업 발전을 선도하기 위한 선도기술개발사업과 IT 신시장 창출 및 IT 산업경쟁력 제고를 위하여 산업체를 대상으로 지원하는 산업기술개발사업, 정보통신분야기 우수한 신기술을 보유하고도 자금부족 등으로 사업화를 못하는 개인 또는 중소기업에게 시제품개발 또는 산업화에 소요되는 사업비를 지원하는 우수신기술지정지원사업, 그리고 표준화사업과 연구기반조성사업 등이 대표적인 정보통신연구개발사업으로 사업별 지원 내용을 살펴보았다. 또한 인력양성을 제외한 정보통신연구개발 출연사업에 $1993{\sim}2001$년간 총 2조 1,755억원을 투자하여 매출이 28조원 이상 발생하는 등의 각종 성과가 있었는데 사업별 성과를 살펴보고 개선방안을 제시하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.723-726
• /
• 2005

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.

• Ocean Systems Engineering
• /
• 제7권2호
• /
• pp.107-120
• /
• 2017

Spud-can is used for fixing jack-up rig on seabed. It needs to be inserted up to the required depth during the installation process to secure enough soil reaction and prevent overturning accidents. On the other hand, it should be extracted from seabed soils as fast as possible during the extraction process to minimize the corresponding operational cost. To achieve such goals, spud-can may be equipped with water-jetting system including monitoring and control. To develop such a smart spud-can, a reliable numerical simulation tool is essential and it has also to be validated against physical model tests. In this regard, authors developed a numerical simulation tool by using a commercial program ANSYS with extended Drucker-Prager (EDP) formula. Authors also conducted small-scale (1/100) physical model tests for verification and calibration purpose. By using the numerical model, a systematic parametric study is conducted both for sand and K(kaolin)-clay with varying important soil parameters and the best estimated soil properties of the physical test are deduced. Then, by using the selected soil properties, the numerical and experimental results for a sand/K-clay multi-layer case are cross-checked to show reasonably good agreement. The validated numerical model will be useful in the next-stage study which includes controllable water-jetting.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.106-113
• /
• 2011

The conventional grounding impedance of a counterpoise is calculated as a function of the length of the counterpoise by use of the distributed parameter circuit model with an application of the EMTP(Electromagnetic Transient Program). The adequacy of the distributed parameter circuit model is examined and verified by comparison of the simulated and the measured results. The conventional grounding impedance of the counterpoise is analyzed for the first short stroke and subsequent short stroke currents. As a result, the simulated results show that the minimum conventional grounding impedance gives at a specified length of the counterpoise. The shorter the time taken to reach the peak of injected currents, the shorter the length of the counterpoise having the minimum conventional grounding impedance. We also present the critical lengths of the counterpoise for short stroke currents as a function of soil resistivity. Based on these results, it is necessary to compute the length of the counterpoise in a specified soil resistivity which satisfies both the low conventional grounding impedance requirement whilst also providing a suitable ground resistance in order to obtain an economical design and installation of the counterpoise.