• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.624-639
• /
• 2016

Among various types of public research institutes (PRI), the government-funded research institutes (GRIs) are having a difficult time in enhancing the efficiency of technology transfer. This study specifically analyzed 1,163 projects conducted by GRIs from 2009~2013 to ascertain the determinants that affect technology transfer process. Along with conducting qualitative analysis on relevant researches, we examined the hypotheses by relying on quantitative analysis, using national R&D data from National Science and Technology Information Service (NTIS). As a result of the analysis, we found that whether or not the project generated applied patent, the royalty varied. Also, depending on different R&D development stage, a number of researchers and the amount of R&D funding, the royalty varied. Finally, we derived that out of all the independent variables, a number of applied patents, a number of researchers and the amount of R&D funds can affect the royalty generated from technology transfer. Based on such results we suggest several policy implications.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.3
• /
• pp.283-288
• /
• 2011

Since minerals are in ionic forms in aqueous phase (like deep sea water), it is very hard to incorporate concentrated minerals in gel like cosmetic formulations which are generally composed of carbomer or acrylates polymer. In this study, we invented a salt-resistant network formulation made of silicon copolyol. It was found that the network formulation traps minerals (especially from marine) in a mesh-like silicone copolyol structure. Since the mineral-containing formulation makes a very thin film on the skin, minerals could be easily absorbed into stratum corneum. In 6 weeks in vivo test, it was found that the novel mineral formulation increased the amounts of amino acids, major components of natural moisturizing factors (NMFs), as well as levels of minerals. It was also found that the moisture contents and the brightness of the skin increased.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.181-182
• /
• 2004

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.40-42
• /
• 2005

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.128-133
• /
• 1997

In manufacturing emulsion lipstick in the past, heat and emulsifyoil phase made with oil, wax and lipophilic emulsifier with water phase together; and then mold above-mentioned materials, so-called lipophilic emulsified lipstick production method has been used. However it is hard to manufacture products using the above said method and furthermore, weak in moisturizing effect, lip care and stability. In this paper, I will discuss about multi-emulsion lipstick complementing already existing emulsion lipstick in terms of stability, giving moisturing effect of lip, and outstanding protection effectiveness of skin by safely gelatinating the state between amphiphilic lipid and water in stable.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.14-15
• /
• 2011

본 논문에서는 단상입력을 가지고, 직류단에 소형 캐패시터를 사용하는 인버터를 사용해 3상 전동기 가변속 구동을 한다. 이때 주기적으로 크게 맥동하는 직류단 전압 조건에서 어떻게 전동기를 제어하는가에 대해 언급한다. 평균 전압 제한원을 전류 영역에 표현하고, 새로운 약자속 영역을 정의한다. 이를 바탕으로 전류 지령을 생성하는 제어기를 구성하여 전동기를 제어할 수 있는 기법을 제안하고 이를 실험을 통해 검증한다. 이를 통해 입력 전류의 고조파를 줄여 역율도 개선할 수 있다.

• Ocean Systems Engineering
• /
• v.10 no.2
• /
• pp.163-179
• /
• 2020

Considering the huge demand of several types of subsea equipment, as Christmas Trees, PLEMs (Pipeline End Manifolds), PLETs (Pipeline End Terminations) and manifolds for instance, a critical phase is its installation, especially when the equipment goes down through the water, crossing the splash zone. In this phase, the equipment is subject to slamming loads, which can induce impulsive loads in the installation wires and lead to their rupture. Slamming loads assessment formulation can be found in many references, like the Recommended Practice RP-N103 from DNV-GL (2011), a useful guide to evaluate installation loads. Regarding to the slamming loads, RP-N103 adopt some simplifying assumptions, as considering small dimensions for the equipment in relation to wave length, in order to estimate the slamming coefficient C_S used in load estimation. In this article, an experimental investigation based on typical subsea structure dimensions was performed to assess the slamming coefficient evaluation, considering a more specific scenario in terms of application, and some reduction of the slamming coefficient is achieved for higher velocities, with positive impact on operability.

• Macromolecular Research
• /
• v.9 no.2
• /
• pp.122-128
• /
• 2001

Monodisperse composite latex particles with size of ca. 300 nm, which consist ofn-butyl acrylate as a soft phase and methyl methacrylate as a hard phase with different morphology, were synthesized by seeded multi-stage emulsion polymerization. Three types of composite latex particles including random-, core/shell-, and gradient-type particles were obtained by using different monomer feeding methods during semi-batch emulsion polymerization. Effect of poly(butyl acrylate)-poly(methyl methacrylate) rubber particle morphology on the mechanical and rheological properties of rubber toughened poly(methyl methacrylate) was investigated. Among three different rubber particles, the gradient-type rubber particle showed better toughening effect than others. No significant variation of rheological property of poly(methyl methacrylate)/rubber blends was observed for the different rubber particle morphology.

• Journal of Korea Foundry Society
• /
• v.37 no.3
• /
• pp.63-70
• /
• 2017

In the present study, effects of an addition of Sn on the microstructure and corrosion behavior were investigated in Mg-4%Zn-(0-3)%Sn casting alloys. With an increase in the Sn content, the ${\alpha}-(Mg)$ dendritic cell size was reduced, whereas the total amount of precipitates increased due to the formation of the $Mg_2Sn$ phase. It was found in immersion and electrochemical corrosion tests that the addition of Sn has a detrimental effect on the corrosion resistance of the Mg-4%Zn alloy. Microstructural examinations of the corrosion product and the corroded surface indicated that an accelerated micro-galvanic effect by the $Mg_2Sn-phase$ particles and a less protective corrosion product on the surface were responsible for the increased corrosion rate at a higher Sn content.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.4
• /
• pp.414-421
• /
• 2014

This paper presents a method of ballistic missile launch point estimation using phase division least squares. The proposed algorithm employs smoothing to enhance estimation accuracy and generates functions of time for total velocity, flight path angle and heading angle, allowing extrapolation to estimate the launch point. Performance of the proposed algorithm is tested in conjunction with the extended Kalman filter and the Kalman filter.