• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.213-213
• /
• 2007

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.6
• /
• pp.259-263
• /
• 2001

The continuum model of transient point defect dynamics to predict the concentrations of interstitial and vacancy is established by estimating expressions for the thermophysical properties of intrinsic point defects. And the point defect distribution in a Czochralski-grown 200 mm silicon crystal and the location of oxidation-induced stacking fault ring(OiSF-ring) created during the cooling of crystals are calculated by using the numerical analysis. The purpose of this paper is to show that his approach lead to predictions that are consistent with experimental results. Predicted point defect distributions by transient point defect dynamic analysis are in good qualitative agreement with experimental data under widely and abruptly varying crystal pull rates when correlated with the position of the OiSF-ring .

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.882-884
• /
• 2003

In this paper, thermal analysis of Cubicle type Gas Insulated Switchgear(C-GIS) was investigated through experiments and numerical analysis. To predict 3-dimensional temperature and velocity distribution, the commercial package was used. Although some assumptions and simplifications were introduced to simulate the model, results from the computational model were in good agreement with actual temperature rise measurements obtained from experiments.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.265-267
• /
• 2000

The RMU is a power apparatus which is used in loop network distribution system. This paper considers the development of the hybrid interrupter in RMU which adopts both rotating arc and thermal expansion technology. Because of the operating principle of this device, it has some merit, compared with other interrupter. In this research, the geometric construction of the interrupting techniques are given and experimental results of hybrid interrupter which is developed by new technology is introduced.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.79-85
• /
• 2020

Ahn-heung Proving Ground(APG) of Agency for Defense Development(ADD) is the only weapon test site which has been performing firing tests for many kinds of missile, artillery and ammunition. APG has been performing the firing tests of so many times every year. The tests related to missiles, artillery and ammunitions cover 80% among the quantity of annual test events. The target area of many kinds of missile, artillery and ammunition is on the sea. Therefore, APG has its marine firing ranges which were approved by the ministry of Defense. Both weapons and ships can run into each other on the sea. APG has to monitor and detect the positions of the ships in the specific dangerous zone on the sea. The positions of the ships are detected by Scanter 2001 radar and GPS100 detection radar. Evading the time period when the ships appear very often on the sea may be a good solution to keep the maritime safety. And evading the place where the ships appear very often on the sea may be a good solution as well. This paper is to analyze the ships' distribution characteristics of marine firing range, which are to raise the efficiency of many kinds firing tests which have been performed in APG of ADD. Ship distribution data from February 2014 to December 2016 were used in this paper. Ship distribution was analyzed with monthly data, seasonal data and etc. The number of the ships in approved sea area is higher in the morning than in the afternoon, and in fall than other seasons, and from August to November, and below 0.5 m in the hight of wave. Using the these conditions, we can raise the test efficiency of many kinds firing tests and guarantee maritime safety. The number of the ships in approved sea area is entirely unrelated to visibility of the sea. The time period when the number of the ships are high on the sea is morning. The season when the number of the ships are comparatively high on the sea is fall. APG of ADD could raise the efficiency of the firing tests and improve the maritime safety, using the analysis results of the characteristics on the ship distribution.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.3
• /
• pp.293-301
• /
• 2020

This paper describes a numerical study on the improvement of performance of the 2 vane pump impellers. The design of these impellers was optimized using a commercial computation fluid dynamics code and design of experiments. Geometric design variables were defined by the impeller blade angle distribution. The objective functions were defined as the total head, total efficiency and solid material size of the impellers. The importance of the geometric design variables was analyzed using 2^k factorial designs. The interaction between the total head, total efficiency and solid material size, according to the impeller blade angle distribution, is discussed by analyzing the 2^k factorial design results.

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.61-69
• /
• 2018

Rare earth elements together with Y and Sc (REEs) are essential in the development of technology for clean and efficient use of energy. In recent years coal deposits have much attention and attracted as a promising alternative raw sources for rare earth elements, not only because the REEs concentrations in many coals or coal ashes are equal to or higher than those found in conventional types of REEs ores but also because of the world wide demand for REEs in recent years has been greater than supply. In the coal ashes, REEs are mainly associated with carbonates, silicates and aluminosilicates in ashes at 800 and $1100^{\circ}C$. These elements are known to be powerful environmental tracers in natural biogeochemical compartments. In this study, to reviewed the REEs originating and distribution patterns in coal ash samples from the bedrock and/or soil weathering that were entrapped by lichens and mosses was investigated. The REEs patterns of different organisms species allowed minor influence of the species to be highlighted compared to the regional lithology.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.9-16
• /
• 2015

The control law for simultaneous pressure and thrust control of solid DACS(Divert Attitude Control System) is suggested. To regulate the two variables effectively, the control structure of sequential loop closer is applied to the system considering the physical characteristics of each variable and the weighted pseudo-inverse method is suggested to allocate effective command for indeterminate system. Also, the pressure guidance law for safe and high acceleration is applied to the homing stage to verify the effectiveness of the command distribution.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.1
• /
• pp.9-15
• /
• 2024

Nd-Fe-B permanent magnets have been utilized on various industrial fields such as electric vehicles, generator, robots with actuator, etc, due to their outstanding magnetic properties even 10 times better than conventional magnets. Recently, there are many researches that report magnetic properties improved by controlling microstructure through adjusting alloying elements or conducting various processing. Especially, post-sintering annealing (PSA) can significantly improve the coercivity by modifying the distribution and morphology of Nd-rich phase which formed at grain boundaries. In this study, Nd-Fe-B sintered magnets were subjected to primary heat treatment followed by secondary heat treatment at 460℃, 500℃, and 540℃ to investigate the changes in microstructure and magnetic properties with the secondary heat treatment temperature. EBSD analysis was conducted to compare anisotropic characteristics. Through the SEM and TEM observation for analyzing the morphology and distribution of Nd-rich phase, we investigated the relationship between microstructure and magnetic properties of sintered Nd-Fe-B magnets.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.71-78
• /
• 2015

Purpose - This study attempts to analyze whether or not there are characteristics among the top management of companies that promote corporate performance at venture companies. It investigates the characteristics of the human and social capital that are inherent in top management at a venture company and conducts an empirical analysis of hypotheses examining if these characteristics will affect utilization of the governmental R&D support system as well as affect the firm's initial success. Research design, data, and methodology - This study conducted theoretical and empirical research together to accomplish the goal of the study. The pilot study researched human capital and social capital as the independent variables; the governmental R&D support system as the parameter; and, the initial success as the dependent variable. The empirical study carried out research on the model, establishment of hypotheses, and the statistical treatment. A survey was conducted targeting top management of high-tech venture companies in Daedeok Innopolis; 500 questionnaires were distributed; and, 222 were collected. Results - The human and social capital inherent in top management at venture companies in the early stages of their existence become good evaluation data for those who are invested in similar resources. If top management includes strong human and social capital, access to external resources will be easier; these will have a positive influence on the selection of overnmental support systems; and, this proper support will also have a positive influence on the initial success of the venture company. The results revealed the following. First, it was found that when the educational level and functional background, (the top management human capital), are the output function, top management human capital had a significant influence on selection of governmental R&D support funds. Second, it was found that the internal social capital and external social capital, (the top management social capital), had a significant influence on selection of governmental R&D support tasks. Third, it was found that selection of the governmental R&D support tasks at the start of the venture company had a positive influence on the corporate financial performance such as sales, business profits, and the increase in workers; and, had a significant influence on nonfinancial performance such as market share, competitive position, product competitiveness, and the future product development. Conclusions - Selection of the governmental R&D support system is not recognized as part of the direct sales of a venture company in its early stages, but as it can reduce costs for technical development and helps significantly in creating test products and mass production, it has a positive influence on the company's financial performance and nonfinancial performance as a result. Therefore, companies should take great efforts to frequently be selected as a candidate in the governmental R&D support system, as it can help facilitate R&D that requires extensive funds. As a result, companies can expect effects such as job creation and patent applications and they can advance future product sales.