• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.609-618
• /
• 2017

This paper presents the quantitative evaluation method for technologies acquired from the defense offset program. We firstly deduced the consideration in development by gathering the opinions of 128 experts by conducting a survey. Next, we made up an additional 49 experts for developing a performance management system of the offset program. The management system covered 4 technology fields which are defense R&D, depot maintenance, performance improvement, and manufacturing. The development procedure was composed of 4 parts: setting-up of work process, defining performance indicators, calculating weighted values of each indicator, and devising quantitative method. The results of this research could be used for enhancing the effectiveness of the offset program in 3 ways: establishing a systematic work process after acquisition of technology in offset program, establishing the positive feedback architecture by providing incentives to superior institute or company which is appointed through quantitative performance evaluating, and publicizing and promoting quantified outstanding performances for contributing to advance the offset program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1137-1146
• /
• 2006

Under this economic circumstance, the logistics firms located in port take better advantages than those in other areas. This study observed those firms with consciousness to which matters were affected a growth of the logistics IT firms. This study considered in terms of three factors which are an economic factor, a political factor and an internal-ability factor for the matters of logistics IT firms' success through the factor analysis. According to the factor analysis, subjective factor showed positive: (1) expanding market through the ideas and abilities, (2) internal relations and government support (3) capability of market identification and focusing on regional industrialization. As a result of the internal ability analysis, there were three positive matters such as (1) a factor of organization or human resource management, (2) relationship with consumer and resource and management ability for strategy, and (3) developing unique product, networking, suitable goods of regional industrialization. The external factor, through the factor analysis was trued out (1) a emerged political factor such as a support up venture, cluster composition, investing R&D and specialist training, (2) economic factor such as tax reduction, financial support, marketing collaboration renting office in a low price by regional government.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.9-16
• /
• 2013

Recent years have witnessed a strong need for eco-friendly and energy-efficient systems owing to global environmental problems. A heat exchanger is a well-known mechanical rig that has long been used in many energy systems. The use of a heat exchanger in an airplane engine has been attempted. In this case, the heat exchanger should be redesigned to be compact, lightweight, and highly reliable, and the issue of mechanical integrity gains importance. Therefore, in this study, we proposed a method for evaluating the mechanical integrity of a tube-type heat exchanger. A U-shaped single tube was used as an example, and its behavior and stress distribution were studied using fluid-structure interaction (FSI) analysis.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.253-259
• /
• 2014

This study was conducted to investigate survival of Bacillus cereus (B. cereus) on stainless steel and polyvinyl chloride (PVC) and its transfer from two material to lettuce. The stainless steel and PVC were innoculated with B. cereus and stored at 6 combination conditions (temperature : $20^{\circ}C$ and $30^{\circ}C$, relative humidity (RH) : 43%, 69%, and 100%). Although the total numbers of B. cereus at RH 43% and RH 69% were reduced by 3.53-4.00 log CFU/coupon within 24 h regardless of material type, the spore numbers of B. cereus was lasted at 3.0 log CFU/coupon. When two materials were stored at $30^{\circ}C$, RH 100%, the spore numbers of B. cereus was rapidly increased by 3.0 log CFU/coupon. In addition, the reduction rate of B. cereus was decreased in the presence of organic matter. Transfer rate of B. cereus from surface of stainless steel and PVC to lettuce was increased by 10 times in the presence of water on the lettuce surface. As a result of this study, the presence of B. cereus on produce contact surfaces can increase the risk of cross-contamination. Thus, it is important that the packing table and conveyer belt in post harvest facility should be properly washed and sanitized after working to prevent cross-contamination.

• Journal of Information Management
• /
• v.43 no.2
• /
• pp.67-83
• /
• 2012

Patents are the sources reflecting technology development by research and development(R&D) as well as the tools to secure economic benefits in the market, so using patent information is crucial for decision making processes in formulating technology development strategies. Intellectual property(IP) portfolios including a set of patents related to products and individual technologies are the basic unit that has the economic meaning in making national policies and technology strategies. Therefore, this research develops a total of 69 measures to identify the collective characteristics for IP portfolios("characteristics index"), by incorporating the patent indexes that have been widely used and the patent indexes that developed recently, and applying the concepts to patent analysis that have been used in interdisciplinary studies including economics and library and information science. The results of this research produced a characteristics index manual which helps experts to identify characteristics of technological innovation systems from various dimensions. We expect that the characteristics indexes can be used as a supportive tool for comparative analysis among IP portfolios in the technology policy making process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.420-426
• /
• 1999

We examined the immune response in flounder, Paralichthys olivaceus, with immunization of formalin killed Edwardsiella tarda as an antigen. The ELISPOT-assay (enzyme-linked immunospot assay) was optimized technically and applied to count the number of total and specific antibody secreting cells (TASC and SASC) in lymphocytes of different lymphatic organs. Incubation of lymphocytes on 96 well plate for more than 2.5hrs came out enough time in ELISPOT-assay for counting the antibody secreting cells in the anterior kidney and spleen. However, too much of plate-coated antigen or rabbit anti-flounder immunoglobulin for SASC or TASC counting, respectively, was appeared to decrease the sensitivity of the assay system. Specificity of the system was also confirmed by the absence of TASC in lymphocytes treated with cycloheximide to prevent protein synthesis. The peak numbers of SASC appeared at wk 3 post immunization after that there was a sharp decrease and reached to almost zero at wk 7. In the spleen and kidney, the timing and numbers of SASC on peak response were concurrent without preferential organ distribution. The specific antibody level in the sera increased rapidly between wk 2 and 3 after immunization, i.e. like the specific cellular response found with ELISPOT-assay on that period, However, the remained high level of specific serum antibody from wk 5 after immunization until the end of experiment was clearly distinguishable from the kinetics of SASC response decreased sharply.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.410-418
• /
• 2021

This study was conducted in 8.2m wide single-span greenhouse to investigate the effect of presence or absence of rafter steel pipe joint and foundation conditions on greenhouse structural performance. Structural performance was evaluated by static loading test using the structural performance evaluation system for single-span greenhouse. The measured displacement was compared with the predicted result by numerical analysis. The displacement of each measurement location showed a significant difference regardless of the conditions of the foundation and presence or absence of rafter steel pipe joint. Compared to the hinge conditions, the difference in structural performance of the greenhouse in the fixed conditions was seen to be relatively large. The difference in structural performance according to presence or absence of rafter steel pipe joints, the lateral stiffness of the joint was 8.1% greater.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.76-82
• /
• 2019

This study has done to search for a solution to remove risk limitedly caused by separating weapon system acquisition from operation and maintenance at the view point of Logistic Commander who's responsible for stable operation and maintenance after acquiring weapon system. At the System development stage, unverified overhaul development plan may cause additional manpower and costs after the development, and furthermore it is likely to have risk to lower reliability of the military. Thus, research and development agency should write overhaul development plan at the System development stage, and it should be verified through evaluation and verification test. Secondly, during research and development, institutional supplementation is needed to calculate human and material resources writing overhaul development plan. Thirdly, it should be able to analyze proper operation & maintenance plan and cost for overhaul plan at the pre-investigation stage. Fourthly, the base which can develop overhaul concept and overhaul factors should be included in the need and need determination document. Lastly, for the weapon system which has small amount of high power figure, project management should be performed to be able to specify at the each acquisition level of weapon system to realize Article 28, clause 3 and 4 of Defense business law.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.470-478
• /
• 2019

As the growth of the domestic defense industry is remarkable regarding technology level and export size, technology protection is necessary. Particularly, there is a need to apply anti-tamper measures to prevent critical technologies from illegally being taken out of weapon systems. However, there is no security protection strategy and system built yet in ROK. Precedent studies discussed the trend analysis and technical research for specific protective techniques, and the application of anti-tamper using limited procedures was provided. Recently, methods of how to select the technology for protection were studied based on risk management. Nonetheless, these studies cannot be associated with the acquisition process for the whole life-cycle, having difficulty with actual development and evaluation of the weapon systems. The objective of our study is to derive the system requirements of the weapon system for which anti-tamper measures have been determined to apply. Specifically, requirements items suitable for the development of anti-tamper weapon systems were derived based on ISO/IEC 19790, the CMVP standard for the development and verification of cryptographic modules. Also, its utilization in technical reviews and test & evaluations was presented. The usefulness of the research results was confirmed through inductive inference and comparative evaluation. The result can be expected to play a role in initiating extensive activities needed for technology protection of the weapon systems.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.31-46
• /
• 2019

As the importance of venture firms has increased as a new growth engine, the South Korea government makes various efforts to establish healthy ecosystems for ventures and start-ups. Especially in order to foster the competitiveness of venture firms, various support policies such as financial and R&D expenses are being expanded and promoted. In this study, the author analyzed the impact of government funding on venture firms' internal competencies and management performance by using the resource-based theory. Moreover, this study tested the moderation effect of firm's growth stages. Unlike previous studies, this study focused on qualitative rather than quantitative aspects of internal competencies and the financial and non-financial performance are used to measure the management performance of the ventures to examine the effects of government funding for venture firms in more details. For the purpose of verifying the hypothesis of this research, "The Research On The Precision Status Of Venture Firms" in 2017 from the Ministry of Small and Medium Business was utilized, which has been compiled since 1999. According to the results of this study, the government funding experience did not significantly affect the company's internal competencies and financial performance, but had a significant impact on the non-financial performance, which in turn seemed to have a significant effect on the financial performance. In addition, it was found that the technology, price, design, and quality competencies affected non-financial performance, while the organizational management and marketing competencies did not. However, the price, design, organizational management, and marketing competencies affected financial performance, while the technology competency was not. Finally, there were no differences in the effectiveness of government funding, depending on the growth stages.