• 한국표면공학회지
• /
• 제47권2호
• /
• pp.68-74
• /
• 2014

The seed step-coverage enhancement process (SSEP) using Pd/Cu/PVP colloids was investigated for the filling of through silicon via (TSV) without void. TEM analysis showed that the Pd/Cu nano-particles were well dispersed in aqueous solution with the average diameter of 6.18 nm. This Pd/Cu nano-particles were uniformly deposited on the substrate of Si/$SiO_2$/Ti wafer using electrophoresis with the high frequency Alternating Current (AC). After electroless Cu deposition on the substrate treated with Pd/Cu/PVP colloids, the adhesive property between deposited Cu layer and substrate was evaluated. The Cu deposit obtained by SSEP with Pd/Cu/PVP colloids showed superior adhesion property to that on Pd ion catalyst-treated substrate. Finally, by implementing the SSEP using Pd/Cu/PVP colloids, we achieved 700% improvement of step coverage of Cu seed layer compared to PVD process, resulting in void-free filling in high aspect ratio TSV.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.689-702
• /
• 2019

This paper deals with the verification of the functions about mining robot, which is the system for developing deep seabed resources by applying V&V(verification and validation). In order to overcome water pressure of 500 bar and to travel on soft ground, and to operate in deep sea environment with bad conditions, it is necessary to develop a robot that can satisfy various deepsea conditions. A mining robot has been developed based on simulation based design and Multidisciplinary design optimization. In order to verify the developed robot, lab test and real sea test should be performed for various marine environment conditions. There are too many requirements to consider, such as space, time, cost, personnel, and environment to do performance test. So it is costly and time consuming for developing robot. In order to solve this problems, V&V technique was applied to mining robot. The stages of mining robot design, fabrication and commission were verified.

• 한국의류산업학회지
• /
• 제21권3호
• /
• pp.318-325
• /
• 2019

This study analyzes current self-nail tips and nail-tip satisfaction. The study method selected from 3 domestic and 3 overseas companies analyzed current self-nail tips based on brand recognition and sales rate. A questionnaire was conducted on 261 adult women in their 20s and 50s about the satisfaction of nail care and self-nail tips. The results are as follows. As a result to analyze the current nail tips, there were products that did not contain the type of nail tip or the composition and ingredients of the glue. An online survey of the sizes of the current nail tips indicated differences in the sizing system method and that the presented sizes are different. The response rate was the highest for the survey results on why self-nail tips were preferred for respondents who prefer self-nail tips because the price was cheap. The reason why they did not prefer self-nail tips was that the degree of completeness was lower and the fitness was not good. In addition, it showed a high response rate in that the adhesive strength was poor and the size did not fit the nails. Therefore, it is necessary to develop a size for nail types by ergonomic design and develop a self-nail tip that can reduce nail damage.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.810-825
• /
• 2021

This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.226-236
• /
• 2021

The purpose of this study was to classify the torso shape based on abdominal protrusion caused by changes in the physical characteristics of middle-aged women. This study analyzed 3D shape data of 401 females ranging in age from 40 to 59 years who participated in the 6th Size Korea project. Based on the Size Korea 3D measurement standard, 27 additional items such as height, protrusion, and angle were measured in the 3D scan data. Nine factors were extracted from the analysis of constituent factors of the torso: "vertical size of torso," "flatness and protrusion of abdomen," "torso front extrusion," "upper body height," "bust size and flatness," "size of belly and angle of lower abdomen," "hip length," "hip flatness," and "horizontal size of bust." As a result of the cluster analysis using these nine factors, the torsos of middle-aged women were classified into three types. Type 1 has upper abdominal deposition with a small and long upper body and an advanced abdomen; type 2 has lower abdominal deposition with a small and short torso and a small belly and hip flexion; and type 3 has central abdominal deposition with a big and long torso, large breasts, and protruding abdo¬men front. The middle-aged women were mostly distributed in Type 2. The above results will be useful as basic data for the development of clothing with improved fit to accommodate the changed physical characteristics of middle-aged women.

• Journal of Ginseng Research
• /
• 제47권2호
• /
• pp.255-264
• /
• 2023

Background: Red ginseng (RG) alleviates psychiatric disorders. Fermented red ginseng (fRG) alleviates stress-induced gut inflammation. Gut dysbiosis causes psychiatric disorders with gut inflammation. To understand the gut microbiota-mediated action mechanism of RG and fRG against anxiety/depression (AD), we investigated the effects of RG, fRG, ginsenoside Rd, and 20(S)-β-D-glucopyranosyl protopanaxadiol (CK) on gut microbiota dysbiosis-induced AD and colitis in mice. Methods: Mice with AD and colitis were prepared by exposing to immobilization stress (IS) or transplanting the feces of patients with ulcerative colitis and depression (UCDF). AD-like behaviors were measured in the elevated plus maze, light/dark transition, forced swimming, and tail suspension tests. Results: Oral gavage of UCDF increased AD-like behaviors and induced neuroinflammation, gastrointestinal inflammation, and gut microbiota fluctuation in mice. Oral administration of fRG or RG treatment reduced UCDF-induced AD-like behaviors, hippocampal and hypothalamic IL-6 expression, and blood corticosterone level, whereas UCDF-suppressed hippocampal BDNF⁺NeuN⁺ cell population and dopamine and hypothalamic serotonin levels increased. Furthermore, their treatments suppressed UCDF-induced colonic inflammation and partially restored UCDF-induced gut microbiota fluctuation. Oral administration of fRG, RG, Rd, or CK also decreased IS-induced AD-like behaviors, blood IL-6 and corticosterone and colonic IL-6 and TNF-α levels, and gut dysbiosis, while IS-suppressed hypothalamic dopamine and serotonin levels increased. Conclusion: Oral gavage of UCDF caused AD, neuroinflammation, and gastrointestinal inflammation in mice. fRG mitigated AD and colitis in UCDF-exposed mice by the regulation of the microbiota-gut-brain axis and IS-exposed mice by the regulation of the hypothalamic-pituitary-adrenal axis.

• 한국ITS학회 논문지
• /
• 제21권1호
• /
• pp.91-104
• /
• 2022

Level 3 자율주행차의 상용화가 가시화됨에 따라 자율주행차의 운행설계영역(ODD)이 고속도로 외 도심도로로 확대될 필요가 있다. 본 연구는 도심도로 내 인프라-자율차 간 협력주행 기반의 자율주행차 서비스에 대한 교통운영효율성 및 안전성 측면의 효과평가를 통해 도심도로 자율협력주행 서비스의 실효성을 분석하였다. 도심도로 자율협력주행 서비스의 구현 및 효과평가는 미시교통시뮬레이션모델을 활용하였으며, 각 서비스별 중점관리목표에 따른 개별적인 효과평가 지표를 선정하여 효과 분석에 활용하였다. 분석 결과, V2X 통신 기반의 자율협력주행 서비스를 통해 자율주행차량의 교통운영 효율성과 안전성이 향상됨을 확인하였고, 그 효과는 자율주행차의 시장점유율이 증가할수록 커지는 것으로 분석되었다. 본 연구는 단속류인 도심도로를 대상으로 V2X 통신 기반의 자율협력주행 서비스의 효과를 도출해낸 것에 의의가 있으며, 향후 자율협력주행 서비스 검증 기반이 마련되는데 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국어류학회지
• /
• 제28권2호
• /
• pp.125-133
• /
• 2016

전 세계 상어류 (상어구 Selachii)는 약 510종이 유효하고, 우리나라에서는 8목 19과 30속 43종이 보고되었다. 우리나라에 분포하는 상어류 43종 모두가 세계자연보존연맹 적색목록 (IUCN Red List)에 등재되었으며, IUCN 등급별 종 수 및 비율은 위기 (EN) 상태 1종 (2.3%) (vs. 전 세계 15종, 3.2%), 취약 (VU) 11종 (25.6%) (vs. 48종, 10.3%), 준위협 (NT) 10종 (23.3%) (vs. 67종, 14.4%), 관심대상 (LC) 9종 (20.9%) (vs. 115종, 24.7%), 정보부족 (DD) 12종 (27.9%) (vs. 209종, 44.9%)이었으며, 위급 (CR)에 해당하는 종은 전 세계에는 11종 (2.4%)인데 우리나라에 서식하는 종은 없었다. 한반도 해역에 분포하는 상어류 중 멸종우려 (Threatened)에 해당하는 12종과 적색목록 범주와 평가는 다음과 같다: 홍살귀상어 (EN, A2bd+4bd), 고래상어 (VU, A2bd+3d), 돌묵상어 (VU, A2ad+3d), 백상아리 (VU, A2cd+3cd), 청상아리 (VU, A2abd+3bd+4abd), 환도상어 (VU, A2d+4d), 횐배환도상어 (VU, A2bd+3bd+4bd), 흉상어 (VU, A2bd+4bd), 귀상어 (VU, A2bd+3bd+4bd), 곱상어 (VU, A2bd+3bd+4bd), 전자리상어 (VU, A2d+4d), 범수구리 (VU, A2d+4d). 멸종 위기 야생동 식물종 국제교역협약 (CITES) 부속서에 전 세계의 연골어류 중 18종이 등재되었으며, 우리나라 해역에 분포하는 상어류는 고래상어, 돌묵상어, 백상아리, 홍살귀상어, 귀상어 등 5종이 부속서 II에 포함되었다. 북태평양에 분포하는 곱상어의 학명 Squalus acanthias는 S. suckleyi로, 북서태평양의 모조리상어는 S. megalops에서 S. brevirostris로 변경되었다.

• 한국식품영양과학회지
• /
• 제40권2호
• /
• pp.196-204
• /
• 2011

HMT가 아밀로오스 함량이 다른 쌀가루의 이화학적 특성과 물리적 변화에 미치는 효과를 조사하였다. 고 아밀로오스 쌀은 태국산 수입쌀 TG(29.2%)와 국내산 특수미인 고아미GM(28.9%)을 사용하였고, 중간 아밀로오스 쌀은 추청미CC(23.6%)와 고시히카리 KSHK(21.2%)를 사용하였다. HMT 쌀가루는 습식제분 쌀가루를 수분함량 21%, 24%, 27%, 30%로 조절하여 각각 $100^{\circ}C$와 $105^{\circ}C$에서 30, 60, 90분 처리하여 제조하였다. HMT GM, HMT, TG 쌀가루의 RVA 특성 변화는 HMT 처리시간, 수분함량 증가에 따라 PV와 BD가 낮아지면서 peak가 사라지는 경향을 보였으며, HMT KSKH 쌀가루는 처리온도와 처리시간 증가에 의해 BD의 현저한 감소와 높은 FV값을 보였고, HMT CC는 다른 쌀가루에 비하여 현저한 PV와 SB 증가와 낮은 BD로 FV가 매우 크게 상승하였다. HMT GM과 HMT TG는 수분 21%, $100^{\circ}C$, 30분에서 HMT 효과가 크게 이루어졌으나 HMT CC와 HMT KSKH는 그보다 높은 $105^{\circ}C$ HMT 온도나 긴 처리 시간이 요구되는 것으로 나타났다. 모든 HMT 쌀가루의 BD는 수분함량, 처리온도와 처리시간이 증가함에 따라 감소하여 수분함량 30%, $105^{\circ}C$, 90분의 HMT 조건에서 최소값을 보였다. HMT로 모든 쌀가루의 팽윤력은 증가였으며 용해도는 CC 이외의 다른 쌀가루에서 모두 증가하였다. 무처리쌀가루시료의 겔 강도는 TG(79.23 g)> GM(38.24 g)> CC (32.26 g)> KSHK(25.66 g) 순이었고 HMT로 모든 쌀가루의 겔 강도는 증가하였으며, HMT GM과 HMT TG가 큰 증가폭을 보였다. 겔 강도는 SB(r=0.777, p<0.01)와 강한 양의 상관관계를, BD(r=-0.713, p<0.01)와 PV(r=-0.355, p<0.05)와는 음의 상관관계를 보여 HMT에 의해 쌀가루의 전분입자 내 분자 간 결합력 강화에 의한 BD 감소와 SB 증가가 겔 강도 상승에 영향을 미친 것을 알 수 있다.

• 설비공학논문집
• /
• 제27권1호
• /
• pp.8-13
• /
• 2015

The objective of this paper is to provide design data of fin-tube heat exchanger which have a large diameter oval tube for dryer application. In this study, the heat transfer and pressure drop performance characteristics of the fin-tube heat exchanger were compared with Dittus-Boelter and a new correlation equation using Wilson plot method. The simulation results based on section by section method were compared with experimental results. These results showed that a new correlation equation using Wilson plot method provided better prediction, about 3 to 12%, than the Dittus-Boelter equation, from the experiment comparison. Also, the pressure drop of simulation results showed much more deviation with the experimental results.