• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.87-91
• /
• 2016

Background: A hand-held detector for an emergency response was developed for nuclide identification and to estimate the information of the ambient dose rate in the scene of an accident as well as the radioactivity of the contaminants. Materials and Methods: To achieve this, the most suitable sensor was first selected as a cadmium zinc telluride (CZT) semiconductor and the signal processing unit from a sensor and the signal discrimination and storage unit were successfully manufactured on a printed circuit board. Results and Discussion: The performance of the developed signal processing unit was then evaluated to have an energy resolution of about 14 keV at 662 keV. The system control unit was also designed to operate the CZT detector, monitor the detector, battery, and interface status, and check and transmit the measured results of the ambient dose rate and radioactivity. In addition, a collimator, which can control the inner radius, and the airborne dust sampler, which consists of an air filter and charcoal filter, were developed and mounted to the developed CZT detector for the quick and efficient response of a nuclear accident. Conclusion: The hand-held CZT detector was developed to make the in-situ gamma-ray spectrometry and its performance was checked to have a good energy resolution. In addition, the collimator and the airborne dust sampler were developed and mounted to the developed CZT detector for a quick and efficient response to a nuclear accident.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제11권7호
• /
• pp.283-290
• /
• 2022

블록체인 기술은 거래를 투명하게 관리함으로써 중앙통제 없이 신뢰 가능한 P2P 거래를 가능하게 한다. 최근에는 금전적 가치를 지닌 선하증권(Bill of Lading, B/L서류)의 무결성을 확보하기 위해 블록체인을 적용한 연구가 진행되고 있다. 본 논문에서는 사용성 개선을 위한 블록체인 기반의 선하증권 시스템을 제안한다. 수출자는 선사로부터 발급 받은 선하증권을 블록체인에 저장하고, 은행에서 이를 조회하여 신용장 거래를 수행한다. 수입자는 선하증권 서류의 지문이 담긴 QR코드(Quick Response code)로 신원증명을 완료한 뒤 화물을 인도 받게 된다. 수출자는 우편으로 보낼 시간과 비용을 절약하고, 물품의 보안을 강화할 수 있다는 점에서 큰 효과를 거둘 수 있다. 수입자의 경우 선적 서류가 블록체인 네트워크에 등록되자 마자 서류를 열람할 수 있고, 신뢰를 바탕으로 거래를 수행할 수 있다는 이점을 갖는다. 뿐만 아니라 은행에서는 선적서류에 대한 검증을 더욱 신속하게 수행할 수 있다.

• 지능정보연구
• /
• 제16권3호
• /
• pp.163-179
• /
• 2010

최근 패션산업에서는 고객의 니즈가 다양해지고 공급 리드타임이 크게 단축됨에 따라 최신 유행을 즉각 반영한 디자인, 빠른 상품 회전율로 승부하는 패스트 패션이 각광받고 있다. 또한, 기업간 경쟁도 심화되면서 얼마나 신속하게 효율적으로 고객의 니즈를 만족시킬 것인가가 패션산업의 중요한 성공요인으로 강조되고 있다. 따라서, 다품종 소량 신속생산이 강조되는 패스트 패션 산업에서는 트랜드 변화에 신속 대응을 지원하는 지능형 신속대응시스템(Intelligent Quick Response System : IQRS) 구축 및 지원을 절실히 요구하고 있다. 본 논문은 패스트 패션 산업 IQRS 구축에서 요구되는 신속대응 프로세스 수립, 지능적 판단을 지원하는 신속대응 기준 및 실행, 신속대응 물량 산정 및 시기 의사결정 모델을 제시하였다. 또한, 신속대응 의사결정의 합리성을 검증할 수 있는 KPI(Key Performance Indicator)를 설계하여 모델의 신뢰도를 향상시켰다. 제시된 각 모델은 A사의 ERP 구현사례를 통해 실용성을 검증하였다.

• 한국버섯학회지
• /
• 제10권1호
• /
• pp.44-48
• /
• 2012

본 연구에서는 배양된 액체종균의 세균 오염 여부를 Giemsa 용액의 단일 염색으로 짧은 시간 안에 정확하게 판정이 가능한지를 조사하였다. Giemsa 용액은 혈액 골수 림프절 말라리아 원충 리케차 세포 등을 염색하는 것으로, 염기성 색소인 methylene azul과 methylene blue, 그리고 산성색소인 eosine을 methyl alcohol-glycerine에 녹여서 제조하였다. 그리고 팽이 액체종균의 폭기 배양액 분취하여 슬라이드에 올리고 Gimesa 용액으로 염색한 후 광학 현미경으로 검사하였다. 이 결과 40~60초 동안의 세균세포를 (팽나무)버섯(류) 균사세포의 부스러기나 잔존 대두박 등과 구별할 수 있었다. 이 Gimesa 용액을 이용한 염색 및 검경방법은 빠르고 간편하며 정확하므로 액체종균을 사용하는 버섯재배 농가에서도 세균 오염을 효과적으로 동정(감지)하는데 이용할 수 있다고 생각한다.

• 보건행정학회지
• /
• 제18권3호
• /
• pp.1-17
• /
• 2008

The measurement and management of patient satisfaction has become one of the key issues in the last two decades. Hospitals must thoroughly understand the needs of their customers and design products and health services that meet and exceed their expectations. The importance-performance analysis(IPA) is a widely used analytical technique that yields strategies for managing customer satisfaction in a variety of applications. IP A is a two-dimensional grid based on customer-perceived importance of quality attributes and attribute performance. Depending on the interplay of these two dimensions, four strategies can be derived. The aim of this study is to develop the management strategies for improving patient satisfaction in university hospitals using the I-P analysis. The attributes on inpatient service quality in 4 university hospitals was investigated using the Martilla and James(l977)' s a mean adjusted I-P grid where the axes of the grid cross at the average rating point of all items. The patient satisfaction questionnaires were completed by 600 hospital inpatients. The main statistical methods are path analysis and IPA with SPSS 12.0 and AMOS 4.0 statistical softwares. The two attributes, physician and medical service, administrative staff kindness attributes position in first quadrant(Keep Up the Good domain). The nurse and nursing service attributes position in second quadrant(Possible Overkill domain). The two attributes, convenience of check-in service, facilities and physical environment position in third quadrant(Low Priority domain). Finally the quality of inpatient service(food etc.) attributes position in fourth quadrant(Concentrate Here domain). These findings show various implications on the development of strategies in university hospitals in the future. It was determined that quality of inpatient service(food etc.) need to concentrate more on investments. These investments include a taste, price, proper provision of food service and quick response of pain management. A low priority was given to investment in streamlining the check-in process of inpatient and hospital facilities and physical environment in the long run.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.185-190
• /
• 1995

Conventional alarm system has many difficulties in the operator's identifying the plant status during special situations such as design basis accidents. To solve the shortcomings, an on-line alarm annunciator system, called dynamic alarm console (DAC), was developed. In the DAC, a signal is generated as alarm by the use of an adaptive setpoint check strategy based on operating mode, and time delay technique is used not to generate nuisance alarms. After alarm generation, if activated alarm is a level precursor alarm or a consequencial alarm, it would be suppressed, and the residual alarms go through dynamic prioritization which provide the alarms with pertinent priorities to the current operating mode. Dynamic prioritization is achieved by going through the system- and mode-oriented prioritization. The DAC has the alarm hierarchical structure based on the physical and functional importance of alarms. Therefore the operator can perceive alarm impacts on the safety or performance of the plant with the alarm propagation from equipment level to plant functional level. In order to provide the operator with the most possible cause of the event and quick cognition of the plant status even without recognizing the individual alarms, reactor trip status tree (RTST) was developed. The DAC and the RTST have been simulated with on-line data obtained from the full-scope simulator for several abnormal cases. The results indicated that the system can provide the operator with useful and compact information fur the earlier termination and mitigation of an abnormal state.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.245-267
• /
• 2013

During preliminary design of a RC building located in a seismic area, having quick but reliable analytical measurement of interstory drifts and storey stiffnesses might be helpful in order to check the fulfillment of damage limit state and stiffness regularity in elevation required by seismic design codes. This paper presents two approximate methods, strongly interrelated each other, and addressed to achieve each of these two purposes for frame buildings. A brief description of some already existing methods addressed to the same aims is included to compare the main differences in terms of general approaches and assumptions. Both new approximate methods are then applied to 9 'ideal' frames and 2 'real' buildings designed according to the Italian seismic code. The results are compared with the 'exact' values obtained by the code-based standard calculation, performed via FEM models, showing a satisfactory range of accuracy. Compared with those by the other methods from literature, they indicate the proposed procedures lead to a better approximation of the objective structural parameters, especially for those buildings designed according to the modern 'capacity design' philosophy.

• International Journal of Railway
• /
• 제1권1호
• /
• pp.1-5
• /
• 2008

The railway system requires safety and reliability of service of all railway vehicles. Suitable technical systems and working methods adapted to it, which meet the requirements on safety and good order of traffic, should be maintained. For detection of defects, non-destructive testing methods-which should be quick, reliable and cost-effective - are most often used. Since failure in railway wheelset can cause a disaster, regular inspection of defects in wheels and axles are mandatory. Ultrasonic testing, acoustic emission and eddy current testing method and so on regularly check railway wheelset in service. However, it is difficult to detect a crack initiation clearly with ultrasonic testing due to noise echoes. It is necessary to develop a non-destructive technique that is superior to conventional NDT techniques in order to ensure the safety of railway wheelset. In the present paper, the new NDT technique is applied to the detection of surface defects for railway wheelset. To detect the defects for railway wheelset, the sensor for defect detection is optimized and the tests are carried out with respect to surface and internal defects each other. The results show that the surface crack depth of 1.5 mm in press fitted axle and internal crack in wheel could be detected by using the new method. The ICFPD method is useful to detect the defect that initiated in railway wheelset.

• 기술혁신연구
• /
• 제13권2호
• /
• pp.45-70
• /
• 2005

Much work on innovation has focused on the manufacturing sector. In this paper, we propose a framework for analyzing innovation in services centred on capability and technology integration. We illustrate the theoretical points made by conducting a case study on an international telephone communications provider Brastel, which introduced significant innovations in international calling services, in the form of rechargeable pre-paid calling card, through effective application of standard IT. Brastel is situated against its main competitors, considering two dimensions of price and service breadth and convenience. A novel technique for measuring competitiveness based on price and service index is introduced. The following competitors were selected: NTT, KDDI, Japan Telecom, Fusion Communications, J-Call / World Link, G-Call, ASP Check, Primus, QuickPhone, and MCI. To create the service index, factors such as ease of use, convenience, number of languages in which the services are available, and additional features were taken into account. The company itself and the rechargeable card innovation were analyzed through in-depth interviews and data collection. It was shown that a competitive advantage was maintained through internal and external capabilities.

• Journal of Korean Dental Science
• /
• 제3권2호
• /
• pp.26-33
• /
• 2010

We searched at the "PubMed.gov" and "jendodon.com" sites to conduct a literature review on dental instruments that are reused in clinical settings and on infection control involving pre-disinfection or sterilization cleaning/rinsing. The keyword "dental clean" was used for the Web search. We found the present official definition of instrument cleaning performed prior to disinfection or sterilization rather limiting ("removal of foreign matter (soil, organism, etc.) from the instruments"). Thus, we proposed to expand the definition to include the removal of oils applied to protect the metallic instruments and from corrosion, stains, and rust resulting from the frequent reuse of the instruments. Clinicians are found to clean their dental instruments (a) immediately after treating their patients or (b) following their treatment but not immediately afterward. In the latter case, we recommend presoaking to be added. Ultrasonic sterilization of 5~15 minutes is found to be more effective in terms of eliminating residual matter from the instruments compared to other methods. To check on the cleaning results, we recommend visual inspection, which can be quick and practical in clinical settings. The latest products being developed and marketed on the market address the related problems. Nonetheless, research must be continued on the effects of presoak, cleaning/rinsing, disinfection, and high-temperature or heating-based sterilization on the dental instruments and on dental clinicians' practices in cleaning, disinfection, and sterilization. We advise dental clinicians to select the proper cleaning methods and detergents for their instruments to help eliminate or prevent corrosion, staining, and rusting, to reduce the maintenance costs, and to ensure user-friendly instruments/apparatuses.