Bumrungpetch, Jeerasit;Tan, Andy Chit;Liu, Shu-Hong;Luo, Xian-Wu;Wu, Qing-Yu;Yuan, Jian-Ping;Zhang, Ming-Kui
International Journal of Fluid Machinery and Systems
/
제7권1호
/
pp.34-41
/
2014
Computational fluid dynamics (CFD) and particle image velocimetry (PIV) are commonly used techniques to evaluate the flow characteristics in the development stage of blood pumps. CFD technique allows rapid change to pump parameters to optimize the pump performance without having to construct a costly prototype model. These techniques are used in the construction of a bi-ventricular assist device (BVAD) which combines the functions of LVAD and RVAD in a compact unit. The BVAD construction consists of two separate chambers with similar impellers, volutes, inlet and output sections. To achieve the required flow characteristics of an average flow rate of 5 l/min and different pressure heads (left - 100mmHg and right - 20mmHg), the impellers were set at different rotating speeds. From the CFD results, a six-blade impeller design was adopted for the development of the BVAD. It was also observed that the fluid can flow smoothly through the pump with minimum shear stress and area of stagnation which are related to haemolysis and thrombosis. Based on the compatible Reynolds number the flow through the model was calculated for the left and the right pumps. As it was not possible to have both the left and right chambers in the experimental model, the left and right pumps were tested separately.
A survey of physical inputs was conducted on the total population of dairy farms supplying milk to the Rewa cooperative dairy company in Fiji. The critical inputs associated with total farm milk production were determined using multiple regression, with analyses being conducted for each of the three identified supplier groups, bulk milk, canned milk and cream. Mean annual milk production per cow averaged 1460 (s.d. = 319), 889 (s.d. = 321) and 800 (s.d. = 451) litres for the bulk milk, canned milk and cream suppliers respectively. Stocking rate averaged 1.37 (s.d. = 1.18) cows per hectare over all farms. Inputs to pasture were universally low and Navua sedge (Cyperus aromaticus) was identified as a major weed. The average amount of supplement fed annually on a grain equivalent basis was 700 (s.d. = 984) kg per cow for bulk milk, 84 (s.d. = 198) kg per cow for canned milk and 146 (s.d. = 542) kg per cow for cream suppliers. The analysis of data from a small group of farms using nitrogen fertiliser indicated that their production levels were higher than the general population. This suggests that there is potential for the Fijian dairy industry to increase milk production through the use of higher inputs to cows and pastures. The regression models relating annual milk production from farms to the two key inputs of number of cows milked and the amount of supplement fed were all significant (p < 0.001). The coefficients of determination for these models ranged from 56.9 to 89.4 percent.
The main objective of this study is to examine genetic changes in growth rate and carcass composition traits in group housed, ad libitum fed pigs, from lines of Large White divergently selected over four years for high and low post-weaning daily gain on a fixed but restricted ration. Genetic parameters for production and carcass traits were also estimated by using average information-restricted maximum likelihood applied to a multivariate individual animal model. All analyses were carried out on 1,728 records of group housed ad libitum fed pigs, and include a full pedigree of 5,324 animals. Estimates of heritability (standard errors in parentheses) were 0.11 (0.04) for lifetime daily liveweight gain (LDG), 0.13 (0.04) for daily carcass weight gain (CDG) and 0.28 (0.06) for carcass backfat (CFT). Genetic correlations between LDG and CDG were highly positive and between LDG and CFT negative, suggesting that selection for lifetime daily gain under commercial conditions of group housing with ad libitum feeding would result in favourable improvement in carcass traits. CFT showed negative genetic correlations with CDG. Correlated genetic responses evaluated as estimated breeding values (EBVs) were obtained from a multivariate animal model-best linear unbiased prediction analysis. After four years of divergent selection for 6 week post-weaning growth rate on restricted feeding, pigs performance tested on ad libitum feeding in groups exhibited changes in EBVs of 6.77 and -9.93 (g/d) for LDG, 4.25 and -7.08 (g/d) for CDG, and -1.42 and 1.55 (mm) for CFT, in the high and low lines, respectively. It is concluded that selection for growth rate on restricted feeding would significantly improve genetic performance and carcass composition of their descendants when group housed and ad libitum fed as is a common commercial practice.
Microencapsulation of cells within microfluidic devices enables explicit control of the membrane thickness or cell density, resulting in improved viability of the transplanted cells within an aggressive immune system. In this study, living cells (3T3 and L929 fibroblast cells) are encapsulated within a semi-permeable membrane (calcium crosslinked alginate gel) in two different device designs, a flow focusing and a core-annular flow focusing geometry. These two device designs produce a bead and a long microfibre, respectively. For the alginate bead, an alginate aqueous solution incorporating cells flows through a flow focusing channel and an alginate droplet is formed from the balance of interfacial forces and viscous drag forces resulting from the continuous (oil) phase flowing past the alginate solution. It immediately reacts with an adjacent $CaCl_2$ drop that is extruded into the main flow channel by another flow focusing channel downstream of the site of alginate drop creation. Depending on the flow conditions, monodisperse microbeads of sizes ranging from $50-200\;{\mu}m$ can be produced. In the case of the microfibre, the alginate solution with cells is extruded into a continuous phase of $CaCl_2$ solution. The diameter of alginate fibres produced via this technique can be tightly controlled by changing both flow rates. Cell viability in both forms of alginate encapsulant was confirmed by a LIVE/DEAD cell assay for periods of up to 24 hours post encapsulation.
Sriphadet, Sukhumaporn;Lambrides, Christopher J.;Srinives, Peerasak
Journal of Crop Science and Biotechnology
/
제10권4호
/
pp.249-256
/
2007
A study was conducted to observe the variation and inheritance of agronomic traits and their interrelationship in mungbean. The objective of the study was to compare agronomic traits and hardseed percentage of 268 recombinant inbred lines(RILs) developed from the cross between wild Vigna subspecies sublobata "ACC 41" with the mungbean cultivar "Berken". The RIL population and their parents were evaluated under controlled conditions in a glass house at the University of Queensland, Brisbane, Australia. The results showed significant differences among the RILs and among the parents in all traits under study. Berken had a longer flowering date and a higher seed weight per plant, but less total leaf number and pod number per plant than ACC 41. A germination test between papers revealed that ACC 41 was 100% hard-seeded and did not germinate at all, while Berken germinated up to 100%. Their RILs distributed well between 0 to 100% hardseed. Upon scarification, all hardseed germinated within seven days. Narrowsense heritability estimates of total leave number, hardseedness, pod length, and pod width were highly heritable at 89.9, 98.9, 93.7, and 93.2%, respectively. The heritability of seed weight per plant and number of seeds per plant were lower at 63.1 and 58.4%, respectively. Seed weight per plant showed positive transgressive segregation when compared with ACC 41 and a positive correlation with 100 seed weight. While the number of seeds per pod showed a negative transgressive segregation when compared with Berken and a negative correlation with pod length and pod width. The RILs gave a 1:1 segregation ratio in leaflet shape, growth habit, and growth pattern, indicating that these traits were controlled by a single dominant gene.
Lee, Sang Hoon;Kim, Jun-Mo;Ryu, Youn Chul;Ko, Kwang Suk
한국축산식품학회지
/
제36권5호
/
pp.583-593
/
2016
The aim of this study was to investigate the effects of morphological characteristics of porcine muscle fibers on growth performance, muscle fiber characteristics, and pork quality taken from the longissimus dorsi muscle. A total of 239 crossbred pigs (164 castrated males and 75 females) were used in this study. Experimental pigs were categorized by the total number of muscle fiber (TNF: High and Low) and cross sectional area of muscle fiber (CSAF: Large, Middle, and Small). Their combinations were classified into six groups (High-Large, HL; High-Middle, HM; High-Small, HS; Low-Large, LL; Low-Middle, LM; Low-Small, LS). The TNF and CSAF were significantly (p<0.05) correlated with growth rate and carcass productivity, while the only of the type I number had no meaningful relationships excluding the correlation with loin area (p<0.001). The proportion of type I area was positively correlated with pH45 min while the proportion of type IIB area was negatively correlated with pH45 min and pH24 h (p<0.05). Drip loss and protein denaturation had strong relationships with the proportion of type IIB number or area. The HL group exhibited the greatest growth performance. In addition, the HL group had significantly greater values in protein solubility than the other groups. In conclusion, this study suggest that high TNF combined to large CSAF improve the ultimate lean meat productivity and assure normal meat quality simultaneously with increased both proportion of number and area of type I, type IIA muscle fibers and lowered proportion of number and area of type IIB.
Background: Coal mining is of significant economic importance to the Australian economy. Despite this fact, the related workforce is subjected to a number of psychosocial risks and musculoskeletal injury, and various psychological disorders are common among this population group. Because only limited research has been conducted in this population group, we sought to examine the relationship between physical (pain) and psychological (distress) factors, as well as the effects of various demographic, lifestyle, and fatigue indicators on this relationship. Methods: Coal miners (N = 231) participated in a survey of musculoskeletal pain and distress on-site during their work shifts. Participants also provided demographic information (job type, age, experience in the industry, and body mass index) and responded to questions about exercise and sleep quality (on-and off-shift) as well as physical and mental tiredness after work. Results: A total of 177 workers (80.5%) reported experiencing pain in at least one region of their body. The majority of the sample population (61.9%) was classified as having low-level distress, 28.4% had scores indicating mild to moderate distress, and 9.6% had scores indicating high levels of distress. Both number of pain regions and job type (being an operator) significantly predicted distress. Higher distress score was also associated with greater absenteeism in workers who reported lower back pain. In addition, perceived sleep quality during work periods partially mediated the relationship between pain and distress. Conclusion: The study findings support the existence of widespread musculoskeletal pain among the coal-mining workforce, and this pain is associated with increased psychological distress. Operators (truck drivers) and workers reporting poor sleep quality during work periods are most likely to report increased distress, which highlights the importance of supporting the mining workforce for sustained productivity.
Kim, MinJu;Ingale, Santosh Laxman;Hosseindoust, Abdolreza;Choi, YoHan;Kim, KwangYeol;Chae, ByungJo
Animal Bioscience
/
제34권8호
/
pp.1365-1374
/
2021
Objective: This study was conducted to investigate the synergistic effect of exogenous multienzyme and phytase on growth performance, nutrients digestibility, blood metabolites, intestinal microflora, and morphology in broilers fed corn-wheat-soybean meal diets. Methods: A 2×2 factorial design was used in this study. Four dietary treatments consisted of i) basal diets (corn-wheat-soybean meal based diets without multi-enzyme and phytase), ii) basal diets with phytase (0.05%), iii) basal diets with exogenous multi-enzyme (0.05%), and iv) basal diets with exogenous multi-enzyme including phytase (0.05%). A total of 480 broiler chickens (Ross 308 - one day old) were weighed and allotted to thirty-two cages (15 birds per cage), and chicks were randomly allocated to four dietary treatments. Results: The body weight gain and feed conversion rate were improved by supplementation of exogenous multi-enzyme containing phytase during the finisher period (p<0.05). The birds fed diets with exogenous multi-enzyme containing phytase had a significantly greater digestibility of dry matter, gross energy, crude protein, calcium, and phosphorus compared with birds fed non-supplemented diets (p<0.05). The chickens fed diets with exogenous multi-enzyme containing phytase showed a higher concentration of Ca and P in the serum (p<0.05). The population of Lactobacillus spp., Escherichia coli, and Clostridium were not affected in the ileum and cecum of chickens fed enzyme-supplemented diets. The dietary supplemental exogenous multi-enzyme containing phytase showed a significant improvement in villus height, crypt depth, and villus height and crypt depth ratio, compared to basal diets or dietary supplemental phytase (p<0.05). Conclusion: The supplementation of the exogenous multi-enzyme containing phytase synergistically improved the growth performance, nutrients digestibility, and villus height of the small intestine of broiler chickens fed a corn-wheat-soybean meal based diets.
This study was aimed to investigate the Cu bioavailability, growth response, digestibility of nutrients, and blood metabolites of broiler chicks fed CuSO4 in nano or common forms. A total of 720 broiler chickens were distributed between eight treatments according to a completely randomized design. There were 8 treatments and 6 replicates in each treatment with 15 birds/replicate. The treatments were divided into common copper sulfate at the doses of 16 ppm, 40 ppm, 80 ppm, and 120 ppm (INO) and hot-melt extruded copper sulfate at the doses of 16 ppm, 40 ppm, 80 ppm, and 120 ppm (HME-Cu). The experiment was operated for 35 days in 2 phases (phase 1, d 0 to 14; and phase 2, d 15 to 35). No significant differences were shown in growth performance, feed intake, FCR, and nutrient digestibility among the treatments. The concentration of Cu in the serum was increased in the HME-Cu broilers compared with the INO broilers at phase 2. A linear increase was observed in the concentration of Cu in the liver in broilers fed INO diets, however, no significant differences were observed by the supplementation of HME-Cu levels. The linear increase was detected in the content of Cu in excreta in the INO and HME-Cu treatments by increasing the dietary Cu content. The HME-Cu treatments showed a lower Cu concentration in the excreta compared with the INO treatments. The higher bioavailability of Cu in HME form can decrease the recommended dose of Cu in broiler diets.
Kim, MinJu;Choi, YoHan;Lee, Jeong-nam;Sa, SooJin;Cho, Hyun-chong
Journal of Animal Science and Technology
/
제63권6호
/
pp.1453-1463
/
2021
Feeding is the most important behavior that represents the health and welfare of weanling pigs. The early detection of feed refusal is crucial for the control of disease in the initial stages and the detection of empty feeders for adding feed in a timely manner. This paper proposes a real-time technique for the detection and recognition of small pigs using a deep-leaning-based method. The proposed model focuses on detecting pigs on a feeder in a feeding position. Conventional methods detect pigs and then classify them into different behavior gestures. In contrast, in the proposed method, these two tasks are combined into a single process to detect only feeding behavior to increase the speed of detection. Considering the significant differences between pig behaviors at different sizes, adaptive adjustments are introduced into a you-only-look-once (YOLO) model, including an angle optimization strategy between the head and body for detecting a head in a feeder. According to experimental results, this method can detect the feeding behavior of pigs and screen non-feeding positions with 95.66%, 94.22%, and 96.56% average precision (AP) at an intersection over union (IoU) threshold of 0.5 for YOLOv3, YOLOv4, and an additional layer and with the proposed activation function, respectively. Drinking behavior was detected with 86.86%, 89.16%, and 86.41% AP at a 0.5 IoU threshold for YOLOv3, YOLOv4, and the proposed activation function, respectively. In terms of detection and classification, the results of our study demonstrate that the proposed method yields higher precision and recall compared to conventional methods.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.