• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.45-50
• /
• 2007

We present a auto compensating quantum key distribution system based on optical fiber at 1550nm. In the quantum key transmission system, main control board and phase modulation driving board are fabricated for auto controlling quantum key distribution(QKD). We tested the single photon counts per dark counts for a single photon detector, quantum key distribution rate($R_{sift}$) and the quantum bit error rate (QBER). Quantum bit error rate of 3.5% in 25km QKD is obtained. This system is commercially available.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.36-40
• /
• 2005

The problem of fluctuation-induced digital errors in a rapid single flux quantum (RSFQ) circuit has been a very important issue. In this work, we calculated the bit error rate of an RSFQ switch used in superconductive arithmetic logic unit (ALU). RSFQ switch should have a very low error rate in the optimal bias. Theoretical estimates of the RSFQ error rate are on the order of $10^{-50}$ per bit operation. In this experiment, we prepared two identical circuits placed in parallel. Each circuit was composed of 10 Josephson transmission lines (JTLs) connected in series with an RSFQ switch placed in the middle of the 10 JTLs. We used a splitter to feed the same input signal to both circuits. The outputs of the two circuits were compared with an RSFQ exclusive OR (XOR) to measure the bit error rate of the RSFQ switch. By using a computerized bit-error-rate test setup, we measured the bit error rate of $2.18{\times}10^{-12}$ when the bias to the RSFQ switch was 0.398 mA that was quite off from the optimum bias of 0.6 mA.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.3-14
• /
• 2013

We demonstrate a fashion of quantum channel combining and splitting, called polar quantum channel coding, to generate a quantum bit (qubit) sequence that achieves the symmetric capacity for any given binary input discrete quantum channels. The present capacity is achievable subject to input of arbitrary qubits with equal probability. The polarizing quantum channels can be well-conditioned for quantum error-correction coding, which transmits partially quantum data through some channels at rate one with the symmetric capacity near one but at rate zero through others.

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.64-64
• /
• 2004

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.31-40
• /
• 2022

This paper proposes an augmented QSBC(Quantum Short-Block Code) that preserves the function of the existing QSBC and adds a single bit-flip error correction function due to Pauli X and Y errors. The augmented QSBC provides the diagnosis and automatic correction of a single Pauli X error by inserting additional auxiliary qubits and Toffoli gates as many as the number of information words into the existing QSBC. In this paper, the general expansion method of the augmented QSBC using seed vector and the realization method of the Toffoli gate of the single bit-flip error automatic correction function reflecting the scalability are also presented. The augmented QSBC proposed in this paper has a trade-off with a coding rate of at least 1/3 and at most 1/2 due to the insertion of auxiliary qubits.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.21-24
• /
• 2005

The problem of fluctuation-induced digital errors in a rapid single flux quantum (RSFQ) circuit has been very important issue. So in this experiment, we calculated error rate of RSFQ switch in superconductiyity ALU, The RSFQ switch should have a very low error rate in the optimal bias. We prepared two circuits Placed in parallel. One was a 10 Josephson transmission lines (JTLs) connected in series, and the other was the same circuit but with an RSFQ switch placed in the middle of the 10 JTLs. We used a splitter to feed the same input signal to the both circuits. The outputs of the two circuits were compared with an RSFQ XOR to measure the error rate of the RSFQ switch. By using a computerized bit error rate test setup, we measured the bit error rate of 2.18$\times$$10^{12}$ when the bias to the RSFQ switch was 0.398mh that was quite off from the optimum bias of 0.6mA.

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.52-52
• /
• 2005

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.531-540
• /
• 2019

Spectral Amplitude Coding Optical Code Division Multiple Access (SAC OCDMA) is an advanced technique in asynchronous environments. This paper proposes design and implementation of a novel quantum logic gate (QLG) code, with code construction algorithm generated without following any code mapping procedures for SAC system. The proposed code has a unitary matrices property with maximum overlap of one chip for various clients and no overlaps in spectra for the rest of the subscribers. Results indicate that a single algorithm produces the same length increment for codes with weight greater than two and follows the same signal to noise ratio (SNR) and bit error rate (BER) calculations for a higher number of users. This paper further examines the performance of a QLG code based SAC-OCDMA system with NAND and direct detection techniques. BER analysis was carried out for the proposed code and results were compared with existing MDW, RD and GMP codes. We demonstrate that the QLG code based system performs better in terms of cardinality, which is followed by improved BER. Numerical analysis reveals that for error free transmission (10^-9), the suggested code supports approximately 170 users with code weight 4. Our results also conclude that the proposed code provides improvement in the code construction, cross-correlation and minimization of noises.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.307-308
• /
• 2008

본 논문에서는 장거리 양자암호 전송에 있어서 광섬유 전송 거리에 따른 오류율을 측정한 연구 결과를 소개한다. 특히 외부 환경에 안정된 양방향 양자 암호 전송 기술의 하나인 plug-and-play 방식의 구도에서 전송 거리를 극대화하는 노력에 있어서 가장 문제시되는 Raleigh-backscattering의 효과에 의한 양자비트 전송에서의 오류를 측정하였다. 아울러 이러한 오류를 최소화하면서 70 km 단일모드 광섬유 전송을 구현한 양자통신 결과를 소개하고자 한다.