• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권4호
• /
• pp.297-301
• /
• 2005

In this paper, we propose a method to estimate camera motion parameter based on invariant point features. Typically, feature information of image has drawbacks, it is variable to camera viewpoint, and therefore information quantity increases after time. The LM(Levenberg-Marquardt) method using nonlinear minimum square evaluation for camera extrinsic parameter estimation also has a weak point, which has different iteration number for approaching the minimal point according to the initial values and convergence time increases if the process run into a local minimum. In order to complement these shortfalls, we, first propose constructing feature models using invariant vector of geometry. Secondly, we propose a two-stage calculation method to improve accuracy and convergence by using homography and LM method. In the experiment, we compare and analyze the proposed method with existing method to demonstrate the superiority of the proposed algorithms.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.23-26
• /
• 2003

This paper explains the die cooling method for improving tool life in the hot forging process. In continuous forming operation such as hot forging process, performed at high speeds, temperature increases of several hundred degrees may be involved. Die hardness was reduced due to thermal softening. Factor of die fracture are wear and plastic deformation of die due to hardness reduction by high temperature. Because die service life was reduced due to this phenomenon during hot forging, quantified data for optimal die cooling method is required. The new developed techniques for predicting tool life applied to estimate the production quantity for a spindle component and these techniques can be applied to improve the tool life in hot forging process

• 한국건설관리학회논문집
• /
• 제12권6호
• /
• pp.79-92
• /
• 2011

건설 프로젝트에서 물량 산출은 공사비를 결정하는 중요한 요소로 정확성과 신뢰성이 요구된다. BIM 데이터로부터 물량정보의 추출은 물량산출을 매우 정확하고 신속하게 수행할 수 있다는 점에서 매우 매력적이다. 하지만, BIM을 어떻게 구축하였는가에 따라 그 물량산출 결과가 매우 상이하게 나타날 수 있다. 프로젝트가 진행됨에 설계정보가 점점 더 구체화되기 때문에 BIM 모델의 완성도와 물량산출의 정확도 또한 높아질 것으로 기대할 수 있다. 하지만, 단계별로 공사비를 예측할 때 현 단계에서의 BIM data를 기반으로 한 물량산출의 정확도가 얼마 정도인지 평가하거나 예측할 수 있는 방법이 없기 때문에 그 결과물을 신뢰하기 어렵고 기존방식의 견적에 다시 의존하게 되는 문제가 발생할 수 있다. 따라서 본 연구에서는 BIM기반 물량산출에 영향을 미치는 요인을 도출하고, 이를 기반으로 BIM기반 물량산출 결과물의 완성도를 정량적으로 측정하고 예측할 수 있는 방법과 체계를 제시하는 것에 초점을 두고 있다. 본 연구에서 제시하는 측정체계와 지수는 약 6개의 파일럿 프로젝트 적용을 통해 그 측정결과의 일관성과 타당성이 검증되었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.287-287
• /
• 2023

Surface water-groundwater interaction (SWGI) is an important hydrological process that influences both the quantity and quality of water resources. However, regional scale SWGI model calibration and uncertainty analysis have been a challenge because integrated models inherently carry a vast number of parameters, modeling assumptions, and inputs, potentially leaving little time and budget to explore questions related to model performance and forecasting. In this study, we have proposed the application of iterative ensemble smoother (IES) for uncertainty analysis and calibration of the widely used integrated surface-subsurface model, SWAT-MODFLOW. SWAT-MODFLOW integrates Soil and Water Assessment Tool (SWAT) and a three-dimensional finite difference model (MODFLOW). The model was calibrated using a parameter estimation tool (PEST). The major advantage of the employed IES is that the number of model runs required for the calibration of an ensemble is independent of the number of adjustable parameters. The pilot point approach was followed to calibrate the aquifer parameters, namely hydraulic conductivity, specific storage, and specific yield. The parameter estimation process for the SWAT model focused primarily on surface-related parameters. The uncertainties both in the streamflow and groundwater level were assessed. The work presented provides valuable insights for future endeavors in coupled surface-subsurface modeling, data collection, model development, and informed decision-making.

• 한국건축시공학회지
• /
• 제23권2호
• /
• pp.143-152
• /
• 2023

본 연구에서는 굳지 않은 콘크리트의 단위수량 정밀 측정방법으로써 고주파가열법을 검토하기 위해 3가지의 대표적인 가열건조 시험방법에 사용되는 단위수량 추정식을 선정하고 계산의 원리 및 실제 시험과정에서 발생할 수 있는 오차 요인을 고찰하였다. 또한, 각 단위수량 추정식의 계산과정에서 고려될 수 없는 실험적 요인인 분체 및 골재의 구성비나 물리특성을 변화시킨 콘크리트에 대해 고주파가열법을 통한 굳지 않은 콘크리트의 단위수량 시험을 진행하였다. 고주파 가열법를 이용한 굳지 않은 콘크리트의 단위수량 시험방법은 ± 20kg/m³의 허용오차 범위를 대부분 만족하였으나, 추정식에 따라 경향 및 오차의 크기가 차이를 나타냈다. 웻스크리닝 과정에서 발생하는 시료 편차 또는 시료 샘플링 과정에서 발생하는 굵은골재채취량 편차로 인한 추정오차의 영향을 최소화하기 위해서는 가열 건조시 콘크리트 시료를 이용하고 이후 시료의 굵은골재의 채취량 편차를 추정식에서 보정하는 방법으로 추정한 단위수량이 가장 정확한 결과를 나타내는 것을 실내 배합시험을 통해 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.133-138
• /
• 2002

Rebar work takes up big proportion in a construction work. The current process of purchasing, cutting and election, and working of rebar induces a lot of loss in rebar. This study is focused on analyzing the problem and the present condition of the process from the calculating of rebar quantifies to the actual constructional stage through surveying those who have experience in the estimation department, or the construction site of a domestic construction company. Many reform measures such as diversification of standard(i.e., 8-meter)bar, calculation of rebar quantities and construction according to the rebar election drawing, expansion of accuracy in layout plan, thoroughness in examination of layout plan in advance, utilization of the worked material, systemization of rebar control(management), and a shift in attitude of the field(site) manager were proposed as the result of the survey.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권1호
• /
• pp.42-47
• /
• 2008

One of the main cases of the desertification impact is the negative contribution of human activities that worsen environment. There are historical facts of inability and excessive activities which destroyed the civilizations. The basic difference is only in the tempo and scales of civilization collapse. Human pressure was accumulated within the centuries and millennia due to the extremely active economic activities. But today it covers only the decades. Presently the process of desertification has a global scale. There are huge factors of Earth aridization as an increase of the quantity of C02 and atmospheric dust and bloom. This process related not only to the arid areas. Obviously a comprehensive approach of development of territories, particularly arid areas is very important. The use of the satellite information and technologies of remote sensing data processing can take a significant place for decision-makers for calculation and estimation of the environment impacts.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.660-665
• /
• 2002

A concrete box culvert has been widely used as a typical structure in case of crossing the railroad and highway. Due to the simplicity of it's own shape, in company with the development of computers many studies on the computer-aided automatic design have been continuously carried out. In this paper, an automated design algorithm has been proposed by the analysis of the existed design data of box culverts. From a viewpoint of the users, a data base system has been constructed to carry out the total design process completely through the minimum input data and by means of direct input method on the monitor screen. And an automatic design program for railroad box culverts, in which one-stop process from the structural calculation to the quantity estimation is possible, has been developed.

• 한국국방경영분석학회지
• /
• 제28권1호
• /
• pp.97-114
• /
• 2002

An estimation of economic life for a new weapon system is a critical issue in aquisition process. In general a life cycle cost consists of, development cost, aquisition cost, and maintenance cost. These costs are not identified and obtained in the beginning of the aquisition process. This paper deals with an economic life for KlAl tank which is being deployed recently, using PRICE model. In order to estimate an KlAl economic life, we use equivalent annual cost method which is sum of capital recovering with return and equivalent O&M cost method. This method determines an economic life by minimizing annual investment cost and operation and maintenance cost. In this paper, an aquisition cost of KlAl is obtained from PRICE H and O&M cost from PRICE HL model. We obtained various results depending upon production quantity. An economic life for KlAl is estimated 18 years when 300 tanks are produced.

• 한국건설관리학회논문집
• /
• 제14권6호
• /
• pp.14-21
• /
• 2013

완성된 도면과 시방서를 기초로 산출한 상세한 물량 정보를 토대로 상세 공사비를 예측하는 업무에 비해 도면과 시방서가 완성되기 이전 단계에서 시설제원이나 개략적인 설계 정보 등을 기초로 개략공사비를 예측하는 업무는 공사비 예측 업무 담당자의 주관적인 판단에 의존하는 경향이 크고 객관성이 낮은 실정이다. 본 연구에서는 도로건설공사 초기단계에서의 사업비 예측 모델을 연구하고 이를 토대로 건설공사 개략공사비 예측 시스템을 개발하였다. 이 시스템은 BIM 및 GIS를 이용하여 사업 초기단계 개략적인 노선선정에 따른 개략공사비 추정에 있어 사례기반추론을 기반으로 사업비 예측의 정확성 향상과 업무 선진화에 기여할 것으로 기대된다. 또한 사용자가 인터넷을 통해 편리하게 접근할 수 있고 객관적이면서 일관성 있는 개략공사비 예측 결과를 제공받을 수 있으므로 업무 투명성 측면의 효과도 기대할 수 있을 것이다.