• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.1
• /
• pp.30-37
• /
• 2002

Recently, there have been frequent environmental threats associated with the red tide. The discharge of bilge water and waste lubricating oil from fishing vessels is known to be the major cause of such problems. In oder to treat those wastes, post processing units at harbours are being considered, and an accurate prediction of the amount of such wastes is required. In this paper we have proposed a method to estimate the amount of bilge water and waste lubricating oil from fishing vessels. We identified the key parameters affecting the quantity of oily bilge water and waste lubricating oil, and proposed a prediction model. We applied the present model to estimate the quantity of oily bilge water and waste lubricating oil in the sample fishing port.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4176-4184
• /
• 2015

Cost Estimate for alternative in design phase of construction become criterion for profitability and feasibility analysis of projects. Initial design phase performed schematic estimate based on similar data in the past. The quantity take-off according to estimators experience and calculation method are occurred different or missing. IT (Information Technology) technology evolution has been promoting BIM technology in construction. It is changing the paradigm of planning, design, construction and maintenance phase throughout the construction project. A number of studies have been attempted to apply BIM technology in the construction. In this paper, we propose schematic estimation framework linking standard format IFC (Industry Foundation Classes) and estimate related knowledge. As a result, it performs a cost prediction for decision-making in the design phase, and expected to overcome the limitations of previous studies. In addition, it is possible actively coping with changes.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.221-228
• /
• 2009

Electronic Product Code Information Services(EPCIS) is an EPCglobal standard for sharing EPC related information between trading partners. EPCIS provides a new important capability to improve efficiency, security, and visibility in the global supply chain. EPCIS data are classified into two categories, master data (static data) and event data (dynamic data). Master data are static and constant for objects, for example, the name and code of product and the manufacturer, etc. Event data refer to things that happen dynamically with the passing of time, for example, the date of manufacture, the period and the route of circulation, the date of storage in warehouse, etc. There are four kinds of event data which are Object Event data, Aggregation Event data, Quantity Event data, and Transaction Event data. This thesis we propose an event-based data model for EPC Information Service repository in RFID based integrated logistics center. This data model can reduce the data volume and handle well all kinds of entity relationships. From the point of aspect of data quantity, we propose a formula model that can explain how many EPCIS events data are created per one business activity. Using this formula model, we can estimate the size of EPCIS events data of RFID based integrated logistics center for a one day under the assumed scenario.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.712-716
• /
• 2013

In solar generation, the PV array's azimuth is headed due south and the tilt is generally $33^{\circ}$ in order to acquire maximum generation. However, when installed in a site where there are buildings or other facilities, the azimuth and tilt are adjusted. Yet, when the azimuth and tilt are deviated from due south and $33^{\circ}$, the generation quantity is decreased substantially and currently a method to estimate the decreasing proportion is unavailable. Therefore, in this thesis, an equation on the "change ratio of solar radiation due to the changes in tilt and azimuth" was deduced by utilizing empirical data on the amount of solar radiation received according to the changes of tilt and azimuth and Interpolation. By using this equation, the decreasing proportion of generating quantity due to the installation methods of PV system can be estimated, therefore, it can be usefully utilized when designing and going through feasibility studies for development of solar generation systems.

• Women's Health Nursing
• /
• v.22 no.4
• /
• pp.297-307
• /
• 2016

Purpose: This study was to estimate salt preference and sodium intake of pregnant women, and identify the relationship between salt preference and sodium intake. Methods: Research design was a cross sectional correlational survey with 197 pregnant women who visited outpatient clinics for antenatal care. The sodium intake levels were estimated by the amounts of sodium intake using the 24-hour recall method and sodium concentration in spot urine. The data were analyzed using descriptive statistics, t-test, ANOVA and Pearson's correlation. Results: Sodium intake using 24-hour recall method was $3,504{\pm}1,359mg$. Sodium intake levels had statistically significant differences depending on income. The average amount of sodium in spot urine was $2,882{\pm}878mg/day$. Sodium excretion levels had statistically significant differences depending on whether participants had preexisting hypertension in their family history and Body Mass Index (BMI) pre-conception. Salt preference was $62.61{\pm}20.96$ out of 180 points. Salt preference had significant differences depending on income, parity, gestational age, BMI pre-conception and showed negative correlation with sodium quantity in spot urine. Conclusion: Sodium intake in pregnant women recommended by World Health Organization recommended is 175%. Salt preference was not significantly different between sodium intake levels, however it was negatively correlated with sodium quantity in spot urine among pregnant women.

• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.37-43
• /
• 2017

In this paper, we propose a method for estimation software quality in terms of software test data, and it is necessary to predict the period of time required for software test evaluation. We need a model to understand of estimation of software quality. In this paper, we propose a model to estimate the number of days for software test using the data obtained through the tester's sex, and present a model for analysing the number of errors according to six quality characteristics by software type.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.3
• /
• pp.83-91
• /
• 2004

With labor shortage and high-wage era, the construction cost is rising and the construction business is dull, demanding the construction environment of Korea to raise profitability through major cost savings and rationalization of construction management. However, although reinforcing bar(rebar) work, which greatly effects the building's safety, endurance, and construction time, is an important phase in construction, it holds serious problem of quality and productivity deterioration due to its characteristic of intensive-labor and maintaining of old work methods resulting in poor management, and costs increase. Therefor in this study to investigate current situation and problems of rebar work and to find methods of betterment, a survey was conducted to site engineers and individuals in division of cost estimate of domestic construction company. The survey questions were on the subjects of (1) calculating rebar quantity, (2) ordering and procurement, (3) rebar cutting and bending, and (4) rebar work management. Method of improvement was sought by analyzing the results of the survey

• Journal of Construction Engineering and Project Management
• /
• v.3 no.4
• /
• pp.1-4
• /
• 2013

Excavation is most commonly used activity in all construction projects. All contracting agencies prefer to use bigger and heavier excavators and dumpers on site to do excavations if quantity of excavation is huge. Estimation of required number of excavators and dumpers for completion of excavation could be rather a tedious process involving repetitive calculation on which professionals spend their valuable time. As the Information Technology is highly involved in construction section there os need to have IT model for estimation of number of excavators and dumpers. The developed model is useful to calculate required equipments within short period of time. The purpose of the developed IT model is to save the time and efforts of the construction professional. The paper discusses about model which can be used on site to estimate numbers of excavators and dumpers required for completion of certain quantity of excavation within the given time. The calculation considers various existing formulas and method to generate the output. This information could certainly be useful in planning equipments on construction project sites. The tool is user friendly where any non IT background person can use it on construction sites.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.999-1006
• /
• 2014

$CO_2$ emission factor for earthwork equipment was made based on fuel consumption quantity using IPCC carbon emission factor. This is presented through the carbon emission estimating guideline each facilities by the Ministry of Land, Infrastructure and Transportation in 2011. However, this method has the defect which don't apply the various condition of site. Therefor it needs the new emission factor supplemented these defects. This study will tries to estimate $CO_2$ emission with the direct measurement method using concentration flow velocity measurement (C-FVM) for earth work equipment and present the new $CO_2$ emission factor for earth work equipment after compare with emission factor of the Ministry of Land, Infrastructure and Transportation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.59-66
• /
• 2001

This experimental study is to investigate the flow characteristics of the multi-hole nozzle used in the fuel injection system of a heavy-duty diesel engine. A multi-hole diesel nozzle with a 2-spring nozzle holder was used in this study and without changing the total orifice exit area, its hole number varied from 3($d_n$=0.42mm) to 8($d_n$=0.25mm). The injection pressure and needle lift were measured and Bosch type injection rates measurement system was used. The discharge flowrates of each orifice in the multi-hole nozzle changed by the flow conditions inside the nozzle sac hole. In case that pump speed and injection quantity were low, the orifice located in the vertex of nozzle tip had a great deal of injection quantity compared with that of others. As the increment of multi-hole number, the injection duration and the mean injection pressure decrease. The mean and peak injection rates, however, increase. Actually, the mean flow coefficient(${C_d}_{(mean)}$) increases, too. The flow coefficient of the multi 8 hole was evaluated as Cd(mean)=0.74 and that is the maximum value among the examined conditions.