• Title/Summary/Keyword: Quantitative value

Search Result 2,011, Processing Time 0.024 seconds

Model design for quantitative value measurement of individual technologies -R&D performance measurement and technology transaction- (개별기술의 정량적 가치추정 모델개발;연구개발투자의 성과측정 및 기술거래시 활용을 중심으로)

  • 조현춘
    • Journal of Korea Technology Innovation Society
    • /
    • v.3 no.1
    • /
    • pp.139-153
    • /
    • 2000
  • The aim of this paper is to provide a new model to evaluate the quantitative value of technology(nonfinancial benefits). This new model is based on the technology stock(technology level) ac-quired in R&D process. The model can explain the quantitative relation between the technology stock(level) and the market value of technology as considering the R&D expenditure to acquire technologies above a certain level(>70%) in comparison with the advanced country and the cost to prevent the technology obsolescence. The value of non-destructive testing technology which is one of the electric power technology is measured quantitatively as a case study.

  • PDF

MODELING QUANTITATIVE VARIATION - In the Kyungnam Dialect of Korean -

  • Cho, Yong-Hyung
    • Speech Sciences
    • /
    • v.1
    • /
    • pp.137-152
    • /
    • 1997
  • The objectives of this paper are to see how the declination is realized in the different positions/lengths of the utterance, to see if the $F_0$ value throughout the utterance changes in a predictable way, and if so, to find out the best quantitative model which fits the declination. The experiment results are as follows. First, the peak value over the utterance can be affected by the position of the peak and length of the utterance. Second, the choice of quantitative models is dependent on the different list lengths. Third, in everyone's speech, there is a baseline (the lowest $F_0$ value a speaker can use), and the $F_0$ will not fall below the baseline. Forth, the peak $F_0$ of the last word in each list shows little variation in pitch value (target $F_0$) while the number of words in the list affects the starting $F_0$ values.

  • PDF

A Quantitative ERRC Analysis Method via Requirements Cost Estimation (요구사항의 비용산출을 통한 정량적인 ERRC 분석 방법)

  • Eom, Jeong-Yong;Kim, Neung-Hoe;Lee, Dong-Hyun;In, Hoh Peter
    • Journal of Information Technology Services
    • /
    • v.8 no.1
    • /
    • pp.113-124
    • /
    • 2009
  • Value-based requirements engineering process, called The ViRE(Value-Innovative Requirement Engineering) was suggested to create an uncontested market using ERRC(Eliminate, Reduce, Raise, Create) requirements analysis. But ViRE did not provides a quantitative data analysis method for ERRC decision so as to make objective decisions for customers. In this paper, to solve this problem, we suggest a quantitative ERRC analysis method by estimating requirements cost. Our method defines user requirements and decides their weight. Then, it makes quality level table for all the identified requirements and function modules and estimate implementation cost based on their quality levels. Finally, assess each requirement's impact and then evaluate ERRC value. We could get the more objective ERRC values by evaluate the requirement weight. functional module weight, and implementation cost. And we proved the efficiency of our model by a case study, smart student ID system.

Combination of Quantitative Parameters of Shear Wave Elastography and Superb Microvascular Imaging to Evaluate Breast Masses

  • Eun Ji Lee;Yun-Woo Chang
    • Korean Journal of Radiology
    • /
    • v.21 no.9
    • /
    • pp.1045-1054
    • /
    • 2020
  • Objective: This study aimed to evaluate the diagnostic value of combining the quantitative parameters of shear wave elastography (SWE) and superb microvascular imaging (SMI) to breast ultrasound (US) to differentiate between benign and malignant breast masses. Materials and Methods: A total of 200 pathologically confirmed breast lesions in 192 patients were retrospectively reviewed using breast US with B-mode imaging, SWE, and SMI. Breast masses were assessed based on the breast imaging reporting and data system (BI-RADS) and quantitative parameters using the maximum elasticity (Emax) and ratio (Eratio) in SWE and the vascular index in SMI (SMIVI). The area under the receiver operating characteristic curve (AUC) value, sensitivity, specificity, accuracy, negative predictive value, and positive predictive value of B-mode alone versus the combination of B-mode US with SWE or SMI of both parameters in differentiating between benign and malignant breast masses was compared, respectively. Hypothetical performances of selective downgrading of BI-RADS category 4a (set 1) and both upgrading of category 3 and downgrading of category 4a (set 2) were calculated. Results: Emax with a cutoff value of 86.45 kPa had the highest AUC value compared to Eratio of 3.57 or SMIVI of 3.35%. In set 1, the combination of B-mode with Emax or SMIVI had a significantly higher AUC value (0.829 and 0.778, respectively) than B-mode alone (0.719) (p < 0.001 and p = 0.047, respectively). B-mode US with the addition of Emax, Eratio, and SMIVI had the best diagnostic performance of AUC value (0.849). The accuracy and specificity increased significantly from 68.0% to 84.0% (p < 0.001) and from 46.1% to 79.1% (p < 0.001), respectively, and the sensitivity decreased from 97.6% to 90.6% without statistical loss (p = 0.199). Conclusion: Combining all quantitative values of SWE and SMI with B-mode US improved the diagnostic performance in differentiating between benign and malignant breast lesions.

The Assessment on the Characteristics of Quantitative Image in Digora$\textregistered$ (Digora$\textregistered$에서 정량영상의 특성에 대한 평가)

  • Kim Jae-Duk
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.29 no.2
    • /
    • pp.397-405
    • /
    • 1999
  • Purpose: To clarify the usefulness and the limitation of Digora system/sup (R)/ by evaluating the physical characteristics as the quantitative image on Image Plate(Ip). Materials and Methods: Radiograms were taken by Heliodent MD(Siemens Co.. Germany) with the image plate for adult. Cu-step wedge as reference material. and three pieces of dry mandibular bone. Image analysis was performed by single color enhancement. density measurement with histogram. The relationship between the exposure conditions and the distribution of the pixel values of the image. the variation of pixel values of each step of Cu-step wedge at two different area and Cu-equivalent value of three pieces of dry mandibular bone measure by the conversion equation. Results: There was no linear relationship between the exposure condition and the average pixel value of the image. of which the distribution was not even. The pixel value differences between the center portion and the periphery were ranged from 60 to 70 in vertical plane and from 15 to 26 in horizontal plane. Two plot profile formed at two different areas of the Cu-step wedge were different. The measured Cu-equivalent values showed the discrepancy among the times of measurement. Conclusion: As above results. Image Plate(Ip) of Digora system/sup (R)/ showed the limitation as the quantitative image. The physical property of IP was expected to need to be compensated for the quantitative evaluation of the bone or others

  • PDF

A Study on the Relationship between Weighted Value and Qualitative Standard in Substantial Similarity (실질적 유사성 판단을 위한 가중치 활용과 질적 분석의 관계)

  • Kim, Si-Yeol
    • Journal of Software Assessment and Valuation
    • /
    • v.15 no.1
    • /
    • pp.25-35
    • /
    • 2019
  • In Korea, the calculation of quantitative similarity is commonly used to gauge the substantial similarity of computer programs. Substantial similarity should be assessed by considering the quantity and quality of areas that show similarity, but in practice, qualitative aspects are reflected by multiplying the weighted value in the calculation of quantitative similarity. However, such a practical method cannot be deemed adequate, considering the fundamental characteristic of the judgment on substantial similarity, which holds that the quantitative and qualitative aspects of similar areas should be considered on an equal footing. Thus, this study pointed out the issue regarding the use of weighted value and sought appropriate ways to take into account qualitative aspects when assessing the substantial similarity of computer programs.

A Study on the introduction of value functions for assessing alternatives with AHP (AHP를 이용한 대안평가에서 가치함수 도입에 관한 연구)

  • 이병욱;정수일
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.19 no.37
    • /
    • pp.95-101
    • /
    • 1996
  • AHP is a competent methodology for multicriteria decision-making such as selection of technology in research laboratory, which requires the consideration of both quantitative and qualitative factors. This paper considers prioritization of technology alternatives using value functions for evaluating quantitative factors in AHP. Value functions are useful for the reducing questionars in this paper.

  • PDF

Investigating the Value of Information in Mobile Commerce: A Text Mining Approach

  • Wang, Ying;Aguirre-Urreta, Miguel;Song, Jaeki
    • Asia pacific journal of information systems
    • /
    • v.26 no.4
    • /
    • pp.577-592
    • /
    • 2016
  • The proliferation of mobile applications and the unique characteristics of the mobile environment have attracted significant research interest in understanding customers' purchasing behaviors in mobile commerce. In this study, we extend customer value theory by combining the predictors of product performance with customer value framework to investigate how in-store information creates value for customers and influences mobile application downloads. Using a data set collected from the Google Application Store, we find that customers value both text and non-text information when they make downloading decisions. We apply latent semantic analysis techniques to analyze customer reviews and product descriptions in the mobile application store and determine the embedded valuable information. Results show that, for mobile applications, price, number of raters, and helpful information in customer reviews and product descriptions significantly affect the number of downloads. Conversely, average rating does not work in the mobile environment. This study contributes to the literature by revealing the role of in-store information in mobile application downloads and by providing application developers with useful guidance about increasing application downloads by improving in-store information management.

Customer Electronic Loyalty towards Online Business: The role of Online Trust, Perceived Mental Benefits and Hedonic Value

  • NGUYEN, Minh Ha;KHOA, Bui Thanh
    • Journal of Distribution Science
    • /
    • v.17 no.12
    • /
    • pp.81-93
    • /
    • 2019
  • Purpose: The success of electronic commerce businesses is the ability to retain the customers and inspire their loyalty in online shopping. The purpose of this study is to develop a model to study the effect of perceived mental benefits, online trust, and hedonic value on the elements of electronic loyalty. Research design, data and methodology: Mixed research method was applied in this study with qualitative and quantitative research method. Qualitative data was collected through focus group discussion with electronic commerce experts. Quantitative data was collected through a survey of 917 customers, in which conducted in four cities and one province in Vietnam. SmartPLS software is used for processing quantitative data. Results: The study points out that four constructs of the mental benefit concept, although not entirely, have an impact on online trust and hedonic value. At the same time, two antecedents of electronic loyalty's three elements are online trust and hedonic value. Conclusions: Through the positive influence between the elements in the conceptual model, the study has shown that the perceived mental benefits, online trust, and hedonic value are important factors to shape the electronic loyalty in developing countries, such as Vietnam. This study proposed some scientific and managerial implications.

A Conceptual Study on the Quantitative Measurement of Digital Data Value (디지털 데이터 가치의 정량적 측정에 대한 개념적 연구)

  • Choi, Sung Ho;Lee, Sang Kon
    • Journal of Information Technology Services
    • /
    • v.21 no.5
    • /
    • pp.1-13
    • /
    • 2022
  • With the rapid development of computer technology and communication networks in modern society, human economic activities in the almost every field of our society depend on various electronic devices. The huge amount of digital data generated in these circumstances is refined by technologies such as artificial intelligence and big data, and its value has become larger and larger. However, until now, it is the reality that the digital data has not been clearly defined as an economic asset, and the institutional criteria for expressing its value are unclear. Therefore, this study organizes the definition and characteristics of digital data, and examines the matters to be considered when considering digital data in terms of accounting assets. In addition, a method that can objectively measure the value of digital data was presented as a quantitative calculation model considering the time value of profits and costs.