• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.217-224
• /
• 2002

It is very important to measure and visualize the changes in the physical properties of fluid flow because this is the foundation of measurement techniques used in aerodynamics, heat transfer, plasma diagnostics, and stress analysis of transparent models. The optical methods are advantageous over probe-based techniques in the optical methods are of high speed, non-contact and are capable of providing full-field results with high spatial resolution. Therefore we propose the electronic speckle pattern interferometry(ESPI) that gives us a solution to overcome those limitations. In this paper the experimental results show qualitative and quantitative visualization of changes in the physical properties of the candle and alcohol lamp with 3D plotting. And we obtained the refractive index, mass density and temperature distribution of fluids. The results clearly show the process of flow phenomena and give the feasibility of quantitative interpretation of gasdynamics.

• Journal of Microbiology and Biotechnology
• /
• 제11권2호
• /
• pp.199-203
• /
• 2001

A simple quantitative method to measure the degree of silanization was developed, based on the reaction of ninhydrin with the silanization reagent (3-aminopropyltriethoxysilane, 3-APTES). At low concentrations (0.001-0.005%, v/v) of 3-APTES, a good linearity was obtained when 3-APTES reacted with undiluted ninhydrin for 30 min. On the other hand, at high levels of 3-APTES, a linearity was obtained when 3-APTES reacted with 3-fold diluted ninhydrin for 20 min. The reliability of regression curves mentioned above was expressed as a regression coefficient ($R^2$) of more than 0.99. Immobilization of different enzymes was introduced via silanization by using the 3-APTES in order to confirm the validity of the ninhydrin method. When yield for each step in the immobilizatio process were compared, yields of both glutaraldehyde and protein were founc to have the same tendency to silanization. These results shw that the ninhydrin method was suitable for quatitative analysis of silanization and that yields of immobilization could be pre-estimated by measuring silanization levels using the ninhydrin method.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.148-155
• /
• 2006

This paper presents a new method for assessing the efficiency of production process plans using tolerance chart to lower production cost. The tolerance chart is used to predict the accuracy of a part that is to be produced following the process plan, and to carry out the quantitative measurement on the efficiency of the process plan. By comparing the values of design tolerances and their corresponding resultant tolerances calculated using the tolerance chart, the process plan that is incapable of satisfying the design requirements and the faulty production operations can be identified. Similarly, the process plan that imposes unnecessarily high accuracy and wasteful production operations can also be identified. For the latter, a quantitative measure on the efficiency of the process plan is introduced. The higher the unnecessary cost of the production, the poor is the efficiency of the process plan. A coefficient is introduced for measuring the process plan efficiency. The coefficient also incorporates two weighting factors to reflect the difficulty of manufacturing operations and number of dimensional tolerances involved. To facilitate the identification of the machining operations and the machined surfaces, which are related to the unnecessarily tight resultant tolerances caused by the process plan, a rooted tree representation of the tolerance chart is introduced, and its use is demonstrated. An example is presented to illustrate the new method. This research introduces a new quantitative process plan evaluation method that may lead to the optimization of process plans.

• 한국직업건강간호학회지
• /
• 제29권1호
• /
• pp.88-96
• /
• 2020

Purpose: This study aimed to identify the mental fitness, perspective taking, attitude toward the elderly, and quantitative encephalogram among caregivers. Methods: In this mixed method research, 14 female caregivers at an elderly care facility in Y city were participated from December 1st to December 31st, 2019. Structured questionnaires were applied to measure general characteristics, mental fitness, perspective taking, and attitude toward the elderly. Brain waves were measured by quantitative encephalogram in the prefrontal lobe. High frequency and high level of care tasks were analyzed using content analysis. Results: According to analysis of brain waves, caregivers experienced high level of physical strain & stress and psychological distraction & stress. Mental fitness (p<.05) and perspective taking (p<.001) were associated with attitude toward the elderly. Moreover, physical strain & stress was associated with psychological distraction & stress (p<.05, p<.001). High frequency and high level tasks were excretion and position change & movement care related tasks, respectively. Conclusion: These findings should be consider as an evidence for supporting care tasks based on concrete and objective understanding of caregivers using self-reported index as well as neurophysiological indicators including brain waves.

• 유통과학연구
• /
• 제17권5호
• /
• pp.61-72
• /
• 2019

Purpose - In this study, we try to measure the efficiency of the traditional market and university cooperation projects and present the direction of policy improvement for the near future by converging the system, which exerts to secure the competitiveness and revitalize its centered-city, and the recent policies that have new business and social Research Design, Data, and Methodology - In order to improve this situation, this study uses Data Envelopment Analysis (DEA) to evaluate the effectiveness of the policy project and propose its evaluation results. Also, we want to derive the weight calculation for utilizing DEA by using AHP method. Results - This study's results were derived from the input and output variables, so instead of qualitative analysis, the conclusion was drawn out from the quantitative analysis. Through this quantitative analysis method, we had an opportunity to identify the characteristics of each site by each year. Conclusions - It is believed that the reliability of the results can be further improved if the qualitative part can be supplemented its unique characteristics of the model which only considers the simple quantitative aspect. Further studies should be undertaken as these sectors are expected to draw out fruitful research conclusion when these aspects were supplemented additionally, so continuous additional study is essential.

• 융합보안논문지
• /
• 제18권2호
• /
• pp.19-24
• /
• 2018

이 연구에서는 사이버 위협을 평가할 시 복합적인 요소들을 고려한 위협 수준의 정량적 평가방안을 제안하였다. 제안된 평가방안은 공격방법과 행위자, 위협유형에 따른 강도, 근접성의 4가지 사이버 위협 요소를 기반으로 퍼지이론을 사용하여 사이버 위협 수준을 정량화하였다. 본 연구를 통해 제시된 사이버 위협 수준 평가는 언어로 표현된 위협 정보를 정량화된 데이터로 제시해 조직이 위협의 수준을 정확하게 평가하고 판단할 수 있다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권7호
• /
• pp.509-516
• /
• 2021

This study aims to find out and measure the level of factors affecting the applicability of environmental management accounting (EMA) in Vietnamese automobile industry enterprises. Data was collected using both quantitative and qualitative methods. First, in general research, qualitative methodology was used to find out factors (variables) that can impact the possibility of implementing EMA in Vietnamese automobile enterprises. Second, in detailed research, all variables are measured using a quantitative method by collecting data through sampling and sending questionnaires. 500 questionnaires were sent to automobile enterprise managers and only 352 questionnaires met the criteria for the data analysis. The study used a mixed research design approach- a procedure for collecting, analyzing, and "mixing" both quantitative and qualitative research and methods in a single study to understand the research problem. Results show that 7 factors affect the possibility of implementing EMA in Vietnamese automobile industry enterprises. These factors are coercive pressure, normative pressure, mimetic pressure, business environmental uncertainty, environmental strategy, benefits when applying EMA, and task complexity. Based on the results of the study, promoting EMA in the automotive industry should depend mainly on the role of governmental departments.

• Geomechanics and Engineering
• /
• 제24권3호
• /
• pp.281-293
• /
• 2021

Uncertainties in geomechanical input parameters which mainly related to inappropriate data acquisition and estimation due to lack of sufficient calibration information, have led wellbore instability not yet to be fully understood or addressed. This paper demonstrates a workflow of employing Quantitative Risk Assessment technique, considering these uncertainties in terms of rock properties, pore pressure and in-situ stresses to makes it possible to survey not just the likelihood of accomplishing a desired level of wellbore stability at a specific mud pressure, but also the influence of the uncertainty in each input parameter on the wellbore stability. This probabilistic methodology in conjunction with Monte Carlo numerical modeling techniques was applied to a case study of a well. The response surfaces analysis provides a measure of the effects of uncertainties in each input parameter on the predicted mud pressure from three widely used failure criteria, thereby provides a key measurement for data acquisition in the future wells to reduce the uncertainty. The results pointed out that the mud pressure is tremendously sensitive to UCS and SHmax which emphasize the significance of reliable determinations of these two parameters for safe drilling. On the other hand, the predicted safe mud window from Mogi-Coulomb is the widest while the Hoek-Brown is the narrowest and comparing the anticipated collapse failures from the failure criteria and breakouts observations from caliper data, indicates that Hoek-Brown overestimate the minimum mud weight to avoid breakouts while Mogi-Coulomb criterion give better forecast according to real observations.

• Educational Technology International
• /
• 제23권2호
• /
• pp.157-181
• /
• 2022

Scale scores for cognitive domains have been used as an important indicator for both academic achievement and clinical diagnosis. For example, in education, Cognitive Abilities Test (CogAT) has been used to measure student's capability in academic learning. In a clinical setting, Cognitive Impairment Screening Test utilizes items measuring cognitive ability as a dementia screening test. We demonstrated a procedure of generating cognitive ability test items similar as in CogAT but the theory associated with the generation is totally different. When creating cognitive test items, we applied automatic item generation (AIG) that reduces errors in predictions of cognitive ability but attains higher reliability. We selected two cognitive ability test items, categorized as a time estimation item for measuring quantitative reasoning and a paper-folding item for measuring visualization. As CogAT has widely used as a cognitive measurement test, developing an AIG-based cognitive test items will greatly contribute to education field. Since CLASS is the only LMS including AIG technology, we used it for the AIG software to construct item models. The purpose of this study is to demonstrate the item generation process using AIG implemented within CLASS, along with proving quantitative and qualitative strengths of AIG. In result, we confirmed that more than 10,000 items could be made by a single item model in the quantitative aspect and the validity of items could be assured by the procedure based on ECD and AE in the qualitative aspect. This reliable item generation process based on item models would be the key of developing accurate cognitive measurement tests.

• Asian-Australasian Journal of Animal Sciences
• /
• 제6권3호
• /
• pp.373-375
• /
• 1993

Quantitative ${\beta}$-galactosidase estimation in the intestinal mucosal cells of calves with diarrhea under experimental conditions due to rotavirus were undertaken. A quantitative decrease of 40-70% in ${\beta}$-galactosidase activity was observed in proximal and middle segments of the small intestine of the infected calves, more so in the middle segments. The decrease in the distal part of the intestine, however, was lesser (5 to 30%). The decrease in the activity was more marked on the day 2 to 6 post infection indicating the degree of the damage of the villi of the small intestine.