• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.122-126
• /
• 2014

Purpose: The new reconstruction algorithms (NRA) provided by vendor aim to shorten the acquisition scan time. Whereas depending on the installed version AutoQuant program used for myocardial SPECT quantitative analysis did not contain the normal data that NRA is applied. Thus, the purpose of this paper is to compare the results according to AutoQuant versions in myocardial SPECT applied NRA and half-time scan (HT). Materials and Methods: Rest Tl and stress MIBI data of total 80 (40 men, 40 women) patients were gathered. Data were applied HT acquisition and ASTONISH (Philips) software which is NRA. Modified autoquant of SNUH and old version of AutoQuant (full-time scan) provided by company were compared. Comparison groups were classified as coronary artery disease (CAD), 24 hrs delay and almost normal patients who have a simple pain patient. Perfusion distribution aspect, summed stress score (SSS), summed rest score (SRS), extent and total perfusion deficit (TPD) of each 25 patient who have above diseases were compared and evaluated. Results: The case of CAD, when using re-edited AutoQuant (HT) SSS and SRS showed about 30% reduction (P<0.0001), Extent showed about 38% reduction and TPD showed about 30% reduction in the tendency (P<0.0001). In the score of the perfusion, especially on the part of infero-medium, infero-apical, lateral-medium and lateral-apical regions were the biggest change. The case of the 24 hrs delay patient SRS (P=0.042), Extent (P=0.018) and TPD (P=0.0024) showed about 13-18% reduction. And the case of simple pain patient, comparison of 4 results showed about 5-7% reduction. Conclusion: This study was started based on expectation that results could be affected by normal patient data. Normal patient data is possible to change by race and gender. It was proved that combination of new reconstruction algorithm for reducing scan time and analysis program according to scan protocol with NRA could also be affected to results. Clinical usefulness of gated myocardial SPECT is possibly increased if each hospital properly collects normal patient data for their scan acquisition protocol.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.3
• /
• pp.171-175
• /
• 2008

Purpose: There have been something difficulties in locating focuses and quantitative analysis in case of pediatric patients because of the relatively small body compared to adults. This author of this study, therefore, evaluated the usefulness of DFOV (Display Field Of View) according to its changes in PET/CT image reconstruction by means of the phantom experiment and pediatric patients examination. Materials & Methods: 0.023 MBq/cc of $^{18}F$-FDG was put into the uniform NU2-94 phantom, and then emission scan was acquired for 10 minutes. For reconstruction, DFOV values were changed to 50, 45, 40, 35, 30, and 25 cm respectively. As for patient images, 20 patients who were diagnosed as the one or suspicion of the children tumor are targeted from Oct 2007 to Jan 2008. For image reconstruction, 50 cm was the basis of DFOV, and the value was adjusted to DFOV 45 cm to 25 cm respectively. In the phantom and the reconstruction image of pediatric patients, the changes in pixel size and $SUV_{max}$ according to DFOV changes were analyzed. Results: As DFOV decreased to 50, 45, 40, 35, 30, and 25 cm by means of the phantom, the pixel size was changed to 3.906, 3.515, 3.125, 2.734, 2.343, and 1.953 mm respectively. Besides, as a result of reconstruction DFOV in images of pediatric patients to 50, to 25 cm, the different values of $SUV_{max}$ are shown as 3.3, 7.3, 12, 14, 18% and 2.6, 4.3, 5.0, 7.0, 10.0% on respectively when 50 cm was the standard. Conclusion: In $SUV_{max}$ using the phantom, as DFOV decreased every 5 cm, the mean value gradually increased. With 50 cm as the standard, the increase rates were 3.7, 6.5, 11.2, 19.5, and 32.1% respectively. As for pediatric patients image too, as DFOV decreased, the rates increased as in the phantom experiment. In image reconstruction, since DFOV decrease regardless of matrix size change reduced the pixel size, the image quality can be improved. This would be more useful than reconstruction and enlarge images of pediatric patients in the same way of examining adults. However, when the value of 35 cm DFOV was applied, this may result in truncated artifact, and thus the application should be properly controlled. Change of DFOV may produce better image for pediatric patients, but changes of SUV values according to DFOV change should be considered in reading.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.563-570
• /
• 2004

The insulin-like growth factor(IGF) system, consisting of IGFs-I and -II ligands and their receptors and six IGF-binding proteins(IGFBPs), plays an important role in survival, proliferation and differentiation of a variety of cell types. Lithium is a known modulator of survival and proliferation of many cell types in vitro. The present study was undertaken to investigate the relationship between LiCI-induced changes in cell survival and growth and the expression of the IGF system components in C6 rat glioma cell line which, besides IGF-I and its receptor, is known to express IGFBP-3 as its major IGF carrier. When C6 cells were cultured for 24h in the absence or presence of 2mM or 5mM LiCl in a 10% serwn-containing medium, the viability and the number of cells were not affected by added lithium. In 72-h culture, however, C6 cells clearly exhibited a dose-dependent response to added LiCl. The cells cultured for 72h in the presence of 0, 2mM and 5mM LiCl exhibited a typical mitotic, a growth-arrested and an apoptotic appearances, respectively. Moreover, the apoptotic cells were accompanied by reduced expression of IGF-I, IGF-I receptor and IGFBP-3 as examined by semi-quantitative reverse transcription-polymerase chain reaction. Interestingly, blockade of IGFBP-3 mRNA translation by addition of 101${\mu}M$ IGFBP-3 anti-sense oligodeoxyribonucleotide in serum-free, 24-h culture resulted in a decrease in the number of cells as well as relative abundance of the target mRNA. In summary, results suggest that the cytotoxic effect of lithium in C6 cell is likely to be mediated, in part, by suppression by this agent of the expression of the IGF system components. In this regard, IGFBP-3 may play at least a 'permissive' role in normal proliferation of this cell.

• Journal of Food Hygiene and Safety
• /
• v.22 no.2
• /
• pp.127-131
• /
• 2007

This study evaluated the bactericidal effect of 10 sanitizers and disinfectants such as ethanol (75 and 95%), iodine (15 and 25 ppm), chlorine (100 and 200 ppm), quaternary ammonium, acid, hydrogen peroxide, and peroxide acetic acid against V. parahaemolyticus. Ten strains of V. parahaemolyticus isolated from Korean foods and 4 strains of standard V. parahaemolyticus were compared for efficacies of various sanitizers and disinfectants by EN 1276 method based on quantitative suspension test. Ethanol (75 and 95%), 25 ppm of iodine, 100 ppm of quaternary ammonium, 145 ppm of hydrogen peroxide and acid showed more than $5log_{10}CFU/mL$ reduction in both clean and dirty conditions. Tests result of chlorine (100 ppm) showed more than $5log_{10}CFU/mL$ reduction in clean condition. Iodine (15 ppm) showed more than $5log_{10}CFU/mL$ reduction except 4 isolated and 1 standard V. parahaemolyticus in clean condition. iodine (15 ppm) also showed under $5log_{10}CFU/mL$ reduction $(0.93{\sim}3.73log_{10}CFU/mL)$ in dirty condition. Eleven hundred ppm of hydrogen peroxide was evaluated as weak sanitizer and disinfectant due to their $0.99{\sim}4.79log_{10}CFU/mL$ reduction on both clean and dirty conditions. Consequently, ethanol, iodine (25 ppm), chlorine (200 ppm), quaternary ammonium, acid and peroxide acetic acid were thought to be effective sanitizer and disinfectant against V. parahaemolyticus.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.279-288
• /
• 2014

To understand changes in composition and distribution of nutrients during early shoot growth of persimmon, organic compounds and inorganic elements of terminal shoots were analyzed for about 40 days from the time of foliation. Sample shoots were collected from mature 'Fuyu' trees for this three-year experiment and they were divided to stem, leaves, and the fruits including flower buds at the earliest stage. During shoot growth, concentration of soluble sugars increased in both leaves and fruits, but that of starch increased only in leaves. Those of amino acids tended to decrease in all the parts but there was no consistent change in proteins. As shoots grew, contents of all the organic compounds in a shoot increased, and they were especially higher in May leaves accounting for more than 60% of the shoot total for each nutrient. Along with shoot growth, concentrations of N and P gradually decreased in all three parts, while K decreased only in stem. However, those of Ca and Mg did not show notable changes in all the parts with wide variations depending on the year. Due to the quantitative increase in growth, contents of inorganic elements in a shoot increased in all the parts and the leaves accounted for 54-82% of the shoot total. At the cessation time of extension growth, a shoot contained 526-768 mg of soluble sugars, 245-844 mg of starch, 26-31 mg of amino acids, and 66-103 mg of proteins for three years. On the other hand, a shoot contained 203-388 mg of K, the greatest among the inorganic elements, followed by 132-159 mg of N. Changes of the nutrients in a shoot were much greater during the earlier stage of growth after foliation than during the later stage toward growth cessation, suggesting the importance of mobilizing reserve nutrients for the early growth of the shoots. The results of this study also suggested that the rate of nutrient changes, especially during the earlier stage of shoot growth, could be affected by environmental and cultural conditions.

• Journal of Environmental Impact Assessment
• /
• v.24 no.2
• /
• pp.134-153
• /
• 2015

When making urban planning, it is important to understand climate effect caused by urban structural changes. Seoul city applies UPIS(Urban Plan Information System) which provides information on urban planning scenario. Technology for analyzing climate effect resulted from urban planning needs to developed by linking urban planning scenario provided by UPIS and climate analysis model, CAS(Climate Analysis Seoul). CAS develops for analyzing urban climate conditions to provide realistic information considering local air temperature and wind flows. Quantitative analyses conducted by CAS for the production, transportation, and stagnation of cold air, wind flow and thermal conditions by incorporating GIS analysis on land cover and elevation and meteorological analysis from MetPhoMod(Meteorology and atmospheric Photochemistry Meso-scale model). In order to reflect land cover and elevation of the latest information, CAS used to highly accurate raster data (1m) sourced from LiDAR survey and KOMPSAT-2(KOrea Multi-Purpose SATellite) satellite image(4m). For more realistic representation of land surface characteristic, DSM(Digital Surface Model) and DTM(Digital Terrain Model) data used as an input data for CFD(Computational Fluid Dynamics) model. Eight inflow directions considered to investigate the change of flow pattern, wind speed according to reconstruction and change of thermal environment by connecting green area formation. Also, MetPhoMod in CAS data used to consider realistic weather condition. The result show that wind corridors change due to reconstruction. As a whole surface temperature around target area decreases due to connecting green area formation. CFD model coupled with CAS is possible to evaluate the wind corridor and heat environment before/after reconstruction and connecting green area formation. In This study, analysis of climate impact before and after created the green area, which is part of 'Connecting green network across the north and south in Seoul' plan, one of the '2020 Seoul master plan'.

• Journal of Food Hygiene and Safety
• /
• v.35 no.1
• /
• pp.51-59
• /
• 2020

This study evalutated the risk of foodborne illness from Vibrio spp. (Vibrio vulnificus and Vibrio cholerae) through sea squirt consumption. The prevalence of V. vulnificus and V. cholerae in sea squirt was evaluated, and the predictive models to describe the kinetic behavior of the Vibrio in sea squirt were developed. Distribution temperatures and times were collected, and they were fitted to probabilistic distributions to determine the appropriate distributions. The raw data from the Korea National Health and Nutrition Examination Survey 2016 were used to estimate the consumption rates and amount of sea squirt. In the hazard characterization, the Beta-Poisson model for V. vulnificus and V. cholerae infection was used. With the collected data, a simulation model was prepared and it was run with @RISK to estimate probabilities of foodborne illness by pathogenic Vibrio spp. through sea squirt consumption. Among 101 sea squirt samples, there were no V. vulnificus positive samples, but V. cholerae was detected in one sample. The developed predictive models described the fates of Vibrio spp. in sea squirt during distribution and storage, appropriately shown as 0.815-0.907 of R² and 0.28 of RMSE. The consumption rate of sea squirt was 0.26%, and the daily consumption amount was 68.84 g per person. The Beta-Poisson model [P=1-(1+Dose/β)^-α] was selected as a dose-response model. With these data, a simulation model was developed, and the risks of V. vulnificus and V. cholerae foodborne illness from sea squirt consumption were 2.66×10^-15, and 1.02×10^-12, respectively. These results suggest that the risk of pathogenic Vibrio spp. in sea squirt could be considered low in Korea.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.101-111
• /
• 2017

Mineral carbonation is a technology in which carbonates are synthesized from minerals including serpentine and olivine, and industrial wastes such as slag and cement, of which all contain calcium or magnesium when reacted with carbon dioxide. This study aims to develop the mineral carbonation technology for commercialization, which can reduce environmental burden and process cost through the reduction of carbon dioxide using steel slag and the slag reuse after calcium extraction. Calcium extraction was conducted using NH4Cl solution for air-cooled slag and convert slag, and ${\geq}98%$ purity calcium carbonate was synthesized by reaction with calcium-extracted solution and carbon dioxide. And we conducted experimentally to minimize the quantity of by-product, the slag residue after calcium extraction, which has occupied large amount of weight ratio (about 80-90%) at the point of mineral carbonation process using slag. The slag residue was used to replace silica sand in the manufacture of cement panel, and physical properties including compressive strength and flexible strength of panel using the slag residue and normal cement panel, respectively, were analyzed. The calcium concentration in extraction solution was analyzed by inductively coupled plasma optical emission spectrometer (ICP-OES). Field-emission scanning electron microscope (FE-SEM) was also used to identify the surface morphology of calcium carbonate, and XRD was used to analyze the crystallinity and the quantitative analysis of calcium carbonate. In addition, the cement panel evaluation was carried out according to KS L ISO 679, and the compressive strength and flexural strength of the panels were measured.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1331-1339
• /
• 2017

DNA barcoding is the identification of a species based on the DNA sequence of a fragment of the cytochrome C oxidase subunit I (COI) gene in the mitochondrial genome. It is widely applied to assist with the sustainable development of fishery-product resources and the protection of fish biodiversity. This study attempted to verify horse-head fish (Branchiostegus japonicus) and fake horse-head fish (Branchiostegus albus) species, which are commonly consumed in Korea. For the validation of the two species, a real-time PCR method was developed based on the species' mitochondrial DNA genome. Inter-species variations in mitochondrial DNA were observed in a bioinformatics analysis of the mitochondrial genomic DNA sequences of the two species. Some highly conserved regions and a few other regions were identified in the mitochondrial COI of the species. In order to test whether variations in the sequences were definitive, primers that targeted the varied regions of COI were designed and applied to amplify the DNA using the real-time PCR system. Threshold-cycle (Ct) range results confirmed that the Ct ranges of the real-time PCR were identical to the expected species of origin. Efficiency, specificity and cross-reactivity assays showed statistically significant differences between the average Ct of B. japonicus DNA ($21.85{\pm}3.599$) and the average Ct of B. albus DNA ($33.49{\pm}1.183$) for confirming B. japonicus. The assays also showed statistically significant differences between the average Ct of B. albus DNA ($22.49{\pm}0.908$) and the average Ct of B. japonicus DNA ($33.93{\pm}0.479$) for confirming B. albus. The methodology was validated by using ten commercial samples. The genomic DNA-based molecular technique that used the real-time PCR was a reliable method for the taxonomic classification of animal tissues.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.841-848
• /
• 2003

The sensory characteristics of red wine Gerbong (G), Campbell (C), Moru (M), Gerbong ＋ Moru (70 : 30, GM), Gerbong + Campbell (70 : 30, GC) and French wine (F, Carbernet Sauvignon, 1998) were evaluated. The preferences of color, flavor, taste and total evaluation were determined by a ranking test, and the organoleptic characteristics were evaluated by a quantitative descriptive analysis (QDA) method. The mean color scores of C, GM, F, GC, M and G were 4.74, 3.94, 4.67, 3.70, 2.65 and 1.47, respectively (p<0.001). The order for the mean score for flavor was GM (4.12) = M (3.94) = C (3.76) = F (3.76) ${\geq}$ GC (3.12)>G (2.29) (p<0.01), and the order for taste was F (4.75) ${\geq}$ C (4.25) ${\geq}$ GM (3.37) = GC (3.50) ${\geq}$ G (2.75) = M (2.37) (p<0.001). The total evaluation of mean scores showed G, M, C, GM, GC and F were 237, 2.44, 4.06, 3.87, 3.64 and 4.81, respectively (p<0.001). Influences of sensory characteristics on the total evaluation, in percentages, were 69.3% for taste, 3.7% for color, and 1.5% for flavor. The influences of taste, color, and flavor in red wine were 17% for sweet, acid, bitter and salty taste, 28.9% for purple and red color, and 14.4% for grape flavor. The attributes of the purple and red colors showed a positive correlation with grape flavor, oak flavor, grape taste, and floral tastes, but a negative correlation with $SO_2$, flavor. The attribute of sweet taste showed a positive correlation with grape flavorand floral flavor, but a negative correlation with bitter and astringency tastes, according to Pearsons correlation analysis (p<0.01).