• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.159-166
• /
• 1999

One of the most general methods that can evaluate the rippability is the seismic exploration. However, most field engineers have hardly used the seismic exploration. Instead of using the seismic exploration, they have usually used rock hammer and naked eyes to confirm the degree of rippability for soil, ripping rock and blasting rock. Therefore, to excavate the ground rationally, it is required to establish a quantitative criterion that can be used for distinguishing rippability. In this study, we find out the characteristics of rock strength through laboratory and field tests. The weathering condition of rock exposed to air due to excavation of soil layer and the variation of rock strength caused by weathering were investigated. A relationship between rock strength values that are obtained from uniaxial compression test, slaking durability test, point load test, schmidt hammer test and absorption ratio test is analyzed. The relationship is expressed in a form of equation by which we can evaluate the rock strengths obtained from simple laboratory and field tests. To evaluate rippability in a reasonable manner, a quantitative approach is proposed and a check list of rippability is developed based on the proposed methodology. It is recommended to modify the proposed method for evaluation of rippability in the field.

• The Journal of Engineering Geology
• /
• v.12 no.1
• /
• pp.89-93
• /
• 2002

Seismic geotomography method was performed to verify rock-filled settlement and its stability in No.38+0 profile and No.40+0 profile. The velocity distributions of geotomography method expressed the quantitative value of the ground conditions. The rock-filled layer and in-situ sediments layer are clearly divided on the basis of seismic velocity 2100 m/sec which is derived from the results of seismic geotomography and boring. Current rock-filled settlement conditions are somewhat different from designed settlement estimation line. Seismic geotomography represents current settlement conditions as a quantitative analysis.

• Journal of Chest Surgery
• /
• v.19 no.2
• /
• pp.188-196
• /
• 1986

Spirometry and regional function studies using 99m-Technetium were performed preoperatively to predict postoperative pulmonary function change in 34 patients who had various pulmonary resectional procedures at the Department of Thoracic and Cardiovascular Surgery, Seoul National University Hospital. Between two months and fourteen months postoperation all the patients were reinvestigated with spirometry and clinical examination to evaluate their functional respiratory status. The postoperative obtained values, especially forced vital capacity [FVC] and forced expiratory volume in one second [FEV1] among the other parameters were compared with the postoperative predicted values. Estimated values of FVC and FEV1 derived from preoperative spirometry and quantitative perfusion lung scan correlated well with the measured postoperative values. The linear regression line derived from correlation between postoperative estimated[X] and postoperative measured[Y] values of FVC and FEV1 in all patients are as follows; 1. Y=0.76x + 0.39 in correlation of FVC [r=0.91] 2. Y=0.88x + 0.17 in correlation of FEV1 [r=0.96],br> This method of estimation was one of the best methods of predicting postoperative pulmonary function change and valuable in determining the extent of safe resection and postoperative prognosis to a poor risk patient with chronic obstructive lung disease.

• Journal of Chest Surgery
• /
• v.28 no.3
• /
• pp.228-232
• /
• 1995

Computed tomography[CT is an effective technique for the evaluation of the thorax following blunt trauma. To evaluate multiply injured 30 patients who were diagnosed as hemothorax in emergency room, computed tomography of thorax was done. The thickness of slice was one centimeter and the entire pleural cavity from the apex to the costophrenic angle was included in the evaluation. Integration and addition of the hemothorax area for each CT slice was made and amount of blood in the pleural cavity was estimated. The slice which showed largest area of hemothorax was selected and the height and width of the hemothorax area were measured. The number of slices which showed radiographic evidence of hemothorax was counted. Regression analysis was done and measured amount of hemothorax, the height and width of the hemothorax area for each slice and number of slices were put as variables. And following equation was derived. V=108.3A-0.8B-7.4C+84.7 [R2=0.74 [ V: amount of hemothorax, A: height, B: width, C: number of slices Total amount of blood from thoracic drainage was compared to the measured amount by computed tomography and the relation between the two values was statistically significant.[p=0.001 In conclusion, quantitative estimation of size of hemothorax was possible by the above equation and the process was very helpful for determination policy of treatment of individual patient.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2001

Pumping characteristics of a turbomolecular pump are influenced by interrelations of the down-stream and upstream pumping speeds (transmission probabilityxaperture conductance), and of gas flow rates (pumping speedxentrance pressure) in two directions. The pumping speed, one of the most important items characterized the performance of a pump, is given by dividing the net flow rate, that is, the difference between the counter flow rates by the pressure at the pumping port. The maximum compression ratio is defined as the ratio of the downstream pumping speed to the upstream one. Because these directional characteristics affect each other and are functions of the pressures of both sides, it is difficult to distinguish the relevant factors. However, quasi-quantitative analyses on them can be done if considering carefully the results of measuring the pumping speed and the maximum compression ratio.

• Transactions of Materials Processing
• /
• v.22 no.2
• /
• pp.86-92
• /
• 2013

When stamping ultra-high-strength steel (UHSS), the phenomenon of galling, which corresponds to a transfer of material from the sheet to the tool surface, occurs because of the high contact pressure between tool and workpiece. Galling leads to increased friction, unstable interface conditions, scratches on the sheet and the tool surfaces and, eventually, premature tool surface failures. Therefore, a simple and accurate evaluation method for tool scratching is necessary for the selection of tool material and coating, as well as for a better optimization of process conditions such as blank holder force and die radius. In this study, the pin-on-disc (PODT) and pin-on-flat surface (POFST) tests are conducted to quantitatively evaluate scratch-related tool life for stamping of UHSS. The variation of the friction coefficient is used as an indicator of scratch resulted from galling. The U-channel ironing test (UCIT) is performed in order to validate the results of the friction tests. This study shows that the POFST test provides a good quantitative estimation of tool life based on the occurrence of scratch.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.1878-1885
• /
• 1999

Ultrasonic technique which is one of the most common nondestructive evaluation techniques has been applied to evaluate the integrity of structures by analyzing the characteristic of scattering sign al from internal defects. Therefore, a numerical analysis of ultrasonic scattering field due to defect profiles is absolutely needed for the accurate, quantitative estimation of internal defects. In this paper, the SH-wave scattering by multi-cavity defects and inclusion using Elastodynamic Boundary Element Method is studied. The effects of shape and distance of defects on transmitted and reflected fields are considered. The interaction of multi-cavity defects in SH-wave scattering is also investigated. Numerical calculations by the BEM have been carried out to predict near field solution of scattered fields of ultrasonic SH-wave. The presented results can be used to improve the detection sensitivity and pursue quantitative nondestructive evaluation for inverse problem.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.780-783
• /
• 2012

Recently, the SoC industry mainly uses various multi-layered bus architectures. However, reckless use of bus layers may results in on-chip communication resources and waste of silicon area. This paper performs a quantitative analysis to compare the two de-facto on-chip buses and SNP. Through the performance estimation, the performance of SNP turns out to be significantly enhanced for asymmetric write and read traffic (non-central F distribution) while symmetric traffic is similar to that of AXI. More specifically, SNP properly places IP cores on the top or bottom, induces the write and read channels to be balanced, and achieves about twenty percent improved performance compared to AXI.

• Journal of Sensor Science and Technology
• /
• v.26 no.4
• /
• pp.251-258
• /
• 2017

According to recent studies by scientists about how to search for food, homes and the mates, it is found that the gradient information plays a key role. From cells to insects and large animals, they mostly either have special sensing organism or use a strategy to measure the gradient. Use of a perturbation as an additional input is introduced for sensor signal processing in order to get the gradient information. Different from typical approach, which calculates the gradient from differentiation, the proposed processing is done by a form of integration, thus it is very robust to noise. Discrete time domain analyses are given for one, two and three input functions for the estimation of the gradients. The amplitude and the frequency of the perturbation are two important parameters for this approach. A quantitative index to measure the effects of the amplitude is developed based on the linear regression analysis. The frequency of the perturbation is to be selected high enough to finish one period of the perturbation before the property is changed significantly with respect to time. Another quantitative index is proposed for guiding the selection of the frequency.

• Journal of the Korean Dietetic Association
• /
• v.12 no.2
• /
• pp.185-199
• /
• 2006

The purpose of this study was to estimate the sites providing accurate and useful informations to the public by monitoring food and nutrition informations distributed through the internet quantitatively about 13 items of 7 necessary requisites. Total of 457 internet sites on the searching engines of Yahoo, Empas, Nate, Naver and Daum were monitored by 10 panels from May, 2004 to October. Thirty eight % of the sites got 7 & 8 total of 14 points and total sites showed a normal distribution. From the estimation of meta data, individual sites(5.19) were operated insufficiently compared with the commercial sites(6.10) and institutional sites(6.60) (p<0.000). According to administrators, sites were evaluated in the order of research institute> government organization> academic association> pharmaceutical company, club, food company, university> hospital> individual (p<0.000). While low-ranked sites were lack of authority because they didn't show the information provider and source, high-ranked ones lack of sustainable management(updating informations) and security. From this study, we suggest that 1) theme, contents and design have to prepared with variety to suit the need of target clients instead of that of site operator; 2) source and origin of information have to be provided; 3) informations have to be updated often and site to be managed sustainably.