• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.13-18
• /
• 2004

This study was designed to establish working range for reoportable range in own laboratory in order to cover the upper and lower limits of the range in test method. We experimented ten times during 10 days for setting of reportable range with between run for method evaluation. It is generally assumed that the analytical method produces a linear response and that the test results between those upper and lower limits are then reportable. CLIA recommends that laboratories verify the reportable range of all moderate and high complexity tests. The Clinical Laboratory Improvement Amendments(CLIA) and Laboratory Accreditation Program of the Korean Society for Laboratory Medicine states reportable range is only required for "modified" moderately complex tests. Linearity requirements have been eliminated from the CLIA regulations and from others accreditation agencies, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. It is important to assess the useful reportable range of a laboratory method, i.e., the lowest and highest test results that are reliable and can be reported. Manufacturers make claims for the reportable range of their methods by stating the upper and lower limits of the range. Instrument manufacturers state an operating range and a reportable range. The commercial linearity material can be used to verify this range, if it adequately covers the stated linear interval. CLIA requirements for quality control, must demonstrate that, prior to reporting patient test results, it can obtain the performance specifications for accuracy, precision, and reportable range of patient test results, comparable to those established by the manufacturer. If applicable, the laboratory must also verify the reportable range of patient test results. The reportable range of patient test results is the range of test result values over which the laboratory can establish or verify the accuracy of the instrument, kit or test system measurement response. We need to define the usable reportable range of the method so that the experiments can be properly planned and valid data can be collected. The reportable range is usually defined as the range where the analytical response of the method is linear with respect to the concentration of the analyte being measured. In conclusion, experimental results on reportable range using concentrated control sample and zero calibrators covering from highest to lowest range were salicylate $8.8{\mu}g/dL$, phenytoin $0.67{\mu}g/dL$, phenobarbital $1.53{\mu}g/dL$, primidone $0.16{\mu}g/dL$, theophylline $0.2{\mu}g/dL$, vancomycine $1.3{\mu}g/dL$, valproic acid $3.2{\mu}g/dL$, digitoxin 0.17ng/dL, carbamazepine $0.36{\mu}g/dL$ and acetaminophen $0.7{\mu}g/dL$ at minimum level and salicylate $969.9{\mu}g/dL$, phenytoin $38.1{\mu}g/dL$, phenobarbital $60.4{\mu}g/dL$, primidone $24.57{\mu}g/dL$, theophylline $39.2{\mu}g/dL$, vancomycine $83.65{\mu}g/dL$, valproic acid $147.96{\mu}g/dL$, digitoxin 5.04ng/dL, carbamazepine $19.76{\mu}g/dL$, acetaminophen $300.92{\mu}g/dL$ at maximum level.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.10
• /
• pp.303-308
• /
• 2020

The ReLU(Rectified Linear Unit) function has been dominantly used as a standard activation function in most deep artificial neural network models since it was proposed. Later, Leaky ReLU, Swish, and Mish activation functions were presented to replace ReLU, which showed improved performance over existing ReLU function in image classification task. Therefore, we recognized the need to experiment with whether performance improvements could be achieved by replacing the RELU with other activation functions in the super resolution task. In this paper, the performance was compared by changing the activation functions in EDSR model, which showed stable performance in the super resolution task. As a result, in experiments conducted with changing the activation function of EDSR, when the resolution was converted to double, the existing activation function, ReLU, showed similar or higher performance than the other activation functions used in the experiment. When the resolution was converted to four times, Leaky ReLU and Swish function showed slightly improved performance over ReLU. PSNR and SSIM, which can quantitatively evaluate the quality of images, were able to identify average performance improvements of 0.06%, 0.05% when using Leaky ReLU, and average performance improvements of 0.06% and 0.03% when using Swish. When the resolution is converted to eight times, the Mish function shows a slight average performance improvement over the ReLU. Using Mish, PSNR and SSIM were able to identify an average of 0.06% and 0.02% performance improvement over the RELU. In conclusion, Leaky ReLU and Swish showed improved performance compared to ReLU for super resolution that converts resolution four times and Mish showed improved performance compared to ReLU for super resolution that converts resolution eight times. In future study, we should conduct comparative experiments to replace activation functions with Leaky ReLU, Swish and Mish to improve performance in other super resolution models.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.45-52
• /
• 2015

With the rising interest in the environment, more attention on ecological restoration for damaged slope surface to restore its original state has been drawn. Generally, the most useful method is vegetation based spray work. This method uses green soil including sewage sludge, sawdust, paper sludge, and weathered granite soil. However, because there are neither accurate information nor test values about green soil, green soil is often lost by environmental factors such as rainfalls and strong winds. To solve the problem of green soil, it is necessary to prepare design standards about green soil, and conduct studies to deal with green soil loss in consideration of various variables including basic material property, soil quality of slope surface, and weather. This study was conducted in the mixture of green soil and eco-friendly soil stabilizer. With green soil, basic material property test and compaction test were conducted for the analysis on the basic characteristics of green soil. In the mixture with soil stabilizer at a certain ratio, we conducted shear strength test depending on the ratio in order to analyze the maximum shear strength, cohesion and the change in internal friction angles. Furthermore, in the mixture ratio of green soil and soil stabilizer, which is the same as the ratio in the shear strength test, an inclination of slope surface was made in laboratory for the analysis on erosion and germination rate. Finally, this study evaluated the most effective and economic mixing ratio of soil stabilizer to cope with neighboring environmental factors. According to the test, the shear strength of green soil increased up to 51% rely onto the mixing ratio of and a curing period, and its cohesion and internal friction angle also gradually increases. It is judged that the mixture of soil stabilizer was effective in improving shear strength and thereby increased the stability of green soil.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.13-22
• /
• 2009

The composite resin, due to its esthetic quality, is considered the material of choice for restoration of anterior teeth. To get a satisfactory result in the composite resin restorations, it is necessary to choose right shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guides or shade guides that are provided by their company, but color differences among them might be expected even using the same shade in various materials. This study is to measure color differences between various light-cured composite resins and shade guides and to provide the clinicians with information which may aid in improved color match of esthetic restoration. Four kinds of light-cured composite resins (Gradia Direct (GD), Z250 (Z250), Clearfil AP-X (AP-X), Esthet X (E X)) and shade guides with A2 and A3 shade were used. Three specimens of each material and one specimen of each shade guide were made. Each composite resin was filled into the Teflon mold (1.35 mm depth, 8 mm diameter), followed by compression, polymerization and polishing with wet sandpaper. Shade guides were grinded with polishing stones and rubber points to a thickness of approximately 1.35 mm. Color characteristics were performed with a spectrophotometer(color i5, GretagMacbeth, USA). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$, $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E^*ab$) between composite resins and shade guides. CIE standard D65 was used as the light source. The results were as follows : 1. Among the $L^*$, $a^*$, $b^*$ values of most of 4 kinds of composite resin specimens which are produced by same shade, there were significant differences(p<0.05). 2. Among all 4 kinds of composite resin specimens which are produced by same shade, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 3. Between most of composite resin specimens investigated and their corresponding shade guides, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 4. In the clinical environment, it is recommended that custom shade guides be made from resin material itself for better color matching. Shade guides supplied by manufacturers or Vita Lumin shade guide may not provide clinicians a accurate standard in matching color of composite resins, and there are perceptible color differences in most of products. Therefore, it is recommended that custom shade guides be made from resin material itself and used for better color matching.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.4
• /
• pp.349-359
• /
• 2010

Objective: This study was performed to compare the clinical outcome of elective single embryo transfer (eSET) performed at the cleavage stage to that of elective double embryo transfer (eDET). Methods: Of the women less than 36 years old who visited Daegu Maria from January 2008 to April 2009, the only women (n=330) with more than 8 mm of endometrial thickness and at least one good quality embryo, who were treated with GnRH agonist long protocol, were included in this study. After information about complications that can arise by multiple embryo transfer, either eSET or eDET was conducted by their request (167 and 163, respectively).Results: The implantation rate of eSET group was significantly higher than that of eDET group (53.9% vs. 40.2%, p<0.01). The twin pregnancy rate of eSET group was significantly lower than that of eDET group (1.1% vs. 32.3%, p<0.001). However, there were no significant differences between two groups in the clinical pregnancy (53.3% vs. 60.7%, p=0.172), ongoing pregnancy (47.3% vs. 54.6%, p=0.185) and live birth rates (44.9% vs. 50.9%, p=0.275). The number of the surplus embryos which developed to the blastocyst stage and cryopreserved at that stage was significantly higher in eSET group than that of eDET group ($3.2{\pm}2.6$ vs. $2.1{\pm}2.4$, p<0.001). Conclusion: These results suggest that eSET should reduce significantly the multiple baby pregnancy without decreasing the whole pregnancy rate in women with less than 36 years old.

• Korea journal of population studies
• /
• v.26 no.2
• /
• pp.1-32
• /
• 2003

An analysis on cause-specific mortality at the provincial level provides essential information for policy formulation and makes it possible to draw hypotheses regarding various diseases and causes of death. Although the mortality level and causes of death at the provincial level are determined by the multiple effects of socioeconomic, cultural, medical and ecological factors, this study primarily intends to examine similarities and differences of cause-specific mortality at the provincial level. Utilizing the registered death and the registered population as of 1998, the delayed death registration and unreported infant deaths were supplemented at the provincial level and age-standardized death rates and life tables were calculated. Regarding the mortality level due to all causes, major findings were as follow: (1) For both sexes as a whole, Seoul showed the lowest mortality level, and Jeonnam showed the highest mortality level; and (2) The differences of the mortality level among provinces were greater for males than females and for those less than 65 years than those 65 years and over. Regarding the cause-specific mortality level revealed in all indicators (cause-specific age-standardized mortality rates and the probability of dying at birth due to a specific cause for males, females, and both sexes combined respectively), the major findings were as follow: (1) The mortality level due to heart diseases was the highest in Busan and the lowest in Gangweon; (2) The mortality level due to liver diseases was the highest in Chonnam; and (3) The mortality level due to traffic accidents was the highest in Chungnam and the lowest in Inchon. As the mortality differentials at the provincial level are related to various factors, exploratory statistical analysis is attempted for the 25 explanatory variables including socioeconomic variables and 90 mortality variables. Mortality due to all causes are related to socioeconomic variables. Among cause-specific mortality, mortality due to liver diseases and traffic accidents is related to socioeconomic variables. Finally, the need to improve the quality of death certificate is discussed.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.27-31
• /
• 2000

As the functional test of cornea. The clinical value of keratometric information was important for assessment the curvature of the cornea, the quality of the corneal surface, the stability of the corneal curvature, and the direction of the corneal astigmatism. This study was performed the comparative analysis of male and female of adult on the base curve, power and astigmatism of the Cornea. On the corneal base curve, the male right eye was 7.656 mm in vertical and 7.966 mm in horizontal. But, the male left cornea was 7.714 mm in vertical base curve and 8.026 mm in horizontal base curve. On the other hand, the female right eye cornea was 7.559 mm in vertical base curve and 7.695 mm in horizontal base curve. But, the female left eye cornea was 7.444 mm in vertical base curve and 7.742 mm in horizontal base curve. On the corneal diopter power, the male right eye was 44.063 diopter in vertical and 43.738 diopter in horizontal. But the male left eye was 44.046 diopter in vertical and 42.304 diopter in horizontal. On the other hand, the female right eye was 44.082 diopter in vertical and 43.77 diopter in horizontal. But, the female left eye was 44.347 diopter in vertical and 43.495 diopter in horizontal. According to the corneal astigmatism axis. The male right eye have 89.9% positive for with the - rule astigmatism, and 8.1 % positive for against - the - rule astigmatism. But, he male left eye have 91.89% positive for with - the - rule astigmatism, and 8.11 % positive for against - the - rule astigmatism. On the other hand, The female right eye have 76.92% positive for with - the - rule astigmatism, and 23.08 % positive for against - the - rule astigmatism. But, the female left have 80.76 % positive for with - the - rule astigmatism, and 17.31 % positive for against - the - rule as tigmatism. The diopter power of corneal astigmatism have 25.57% positive for behind 1 diopter, 44.89% positive for 1 diopter, 18.18% positive for 2 diopter, 5.11% positive for 3 diopter and 6.25% positive for over 4 diopter.

• Cartoon and Animation Studies
• /
• s.26
• /
• pp.131-156
• /
• 2012

As the Global Age has arrived, the domain of festivals has expanded to fulfill the role of being not only a tourist attraction but of being a factor that determines the image and identity of cities, and the factor of enhancing the brand value of a particular city is being focused upon. The city of Bucheon, which aims to be a culture oriented city, is attempting to utilize the Bucheon International Comics Festival as a cultural asset for the revitalization of the city. This study has as its purpose the development of an evaluation index model on the brand value of the Bucheon International Comics Festival and research being conducted based on the developed evaluation index model on the awareness level of the citizens of Bucheon of the festival. In regards to this, the theoretical background was examined and the index model was developed based on precedent research. Based on this, a survey of 1,000 citizens of Bucheon was conducted in this study. This study conducted a survey targeting 500 persons, dividing them into 2 groups according to whether they participated in the festival. The survey of this study established 9 evaluation categories for the International Comics Festival evaluation index model which consists of demographic research and participation motivation, value of comics, festival brand awareness and association image, perceived product quality and loyalty for the festival, internationality of the festival and urban activation. Each survey question is composed of 5 points scale measurement. As a result of the survey, 'for an education of children' was the highest for the participation motivation, and 'not knowing of the festival information' was the highest for the reason of not having participated. The industrial value was evaluated as the highest among the value of comics by the both two groups, and it was studied that there was perception gap for the festival according to whether they participated in the festival for each survey question. It was revealed that the level of awareness of the Bucheon International Comics Festival was "normal," the "city revitalization" index and the "value of comics" index were relatively high and the "international character of the festival" index was the lowest. Furthermore, it was shown that there were differences in the awareness of the established categories of the developed evaluation index model based on whether or not there was participation in the festival. This study comprehensively organizes these analytical results and derives implications which can be used as data for the criteria of the development of future strategy for the Bucheon International Comics Festival.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.352-363
• /
• 1999

It has been rare to obtain reliable information related to the size of forest land in North Korea. Several sources of forest statistics, ranging from the first map of forest distribution in Korean Peninsula produced in 1910 to official data reported by the North Korea Government in 1997, were gathered and analyzed to define the characteristics of forest cover changes over years. In addition, Landsat satellite data obtained from 1973 to 1993 were processed for the two study areas of the provinces of Pyungyang and Heasan, where the topography and land use pattern are significantly different each other. Using three sets of multitemporal Landsat imagery, land cover ma-ps were produced by computer classification. Although forest statistics reported before 1990 are somewhat inconsistent, they mere gradually decreasing over years. The estimates of 1991 satellite data and the recent statistics reported in 1998 shows very steep decline in forest lands as compared to the ones before 1990. The abrupt decrease of forest lands after 1990 was also found on the detailed analysis of Landsat data for the two study areas of Pyungyang and Heasan. The rapid decline of forest lands may have something to do with the poor economic situation of the country and the continuing natural disasters of severe flooding and drought. Unstocked forest, which was not classified into forest land, was a very distinct and pervasive land cover type that can be easily observed on satellite imagery. Since unstocked forest land in North Korea may be a critical factor for degrading environmental quality as well as for the continuing natural disasters, further analysis is necessary to define the exact extent and the physical characteristics of the cover type.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.578-587
• /
• 2015

Nuclear SSR (nSSR) and chloroplast SSR (cpSSR) markers were analyzed to assess the parameters of mating system in seed orchard, such as outcrossing rates, the number of potential pollen contributors, paternal contribution rates, degree of pollen contamination, and biparental inbreeding ($t_m-t_s$). In 2006, 2007, seeds were collected from the seed orchard of Pinus densiflora, established in 1977 at Anmyeon island. Estimates of outcrossing rates ranged from 94.9 to 100% (mean 98.9%) in 2006 and from 91.2 to 100% (mean 97.7%) in 2007 on the basis of the analysis of cpSSR haplotypes and from 90.3 to 100% (mean 95.9%) in 2006 and from 81.6 to 100% (mean 95.3%) in 2007 on the basis of the analysis of nSSR genotypes. By cross checking of both DNA markers, mean cumulative outcrossing rates of 100% and 98.9% were estimated in each year. Mean contamination rates were estimated as 48.9% and 42.4%, respectively. On the basis of cpSSR haplotype observed in each seed, paternal contribution rates (the number of pollen contributors) were estimated as 0.458 (mean 16.2) in 2006 and 0.512 (mean 14.8) in 2007. In conclusion, considering pretty high level of outcrossing rates observed in a seed orchard, there might be little to be influenced by inbreeding depression for genetic potential of the seeds induced by selfing. Estimates of the mating system parameters obtained from the two reproductive years were not statistically different, which revealed stable genetic quality of seeds produced in different years. Observed results from this study may provide useful information for the management and establishment of the seed orchard of the progressive generation.