• Title/Summary/Keyword: Quality correction factor

검색결과 106건 처리시간 0.022초

몬테칼로 계산을 이용한 평판형 전리함의 고에너지 전자선에 대한 선질보정인자 결정 (Determination of Quality Correction Factors for a Plane-Parallel Chamber in High Energy Electron Beams using Monte Carlo Calculation)

  • 정동혁;이정옥
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제31권1호
    • /
    • pp.89-95
    • /
    • 2008
  • 국제원자력기구의 TRS-398 측정 프로토콜을 임상에 적용하기 위해서는 사용하는 빔과 전리함에 대한 선질 보정인자가 필요하다. 본 연구에서는 몬테칼로 계산코드(DOSRZnrc/EGSnrc)를 사용하여 상용의 평판형전리함에 대한 고에너지 전자선($4{\sim}20\;MeV$)에서의 선질보정인자를 계산하였다. 계산결과를 프로토콜에서 제시하는 값과 비교한 결과 $5{\sim}20\;MeV$에서 약 1% 이내로 일치하였으며 4 MeV의 경우에는 약 1.9% 차이를 보였다. 본 연구 방법은 선질보정인자를 독립적으로 결정하는 방법의 하나로서 프로토콜에서 주어진 값들의 확인이 필요하거나 또는 새로운 모델의 전리함을 사용하는 경우에 응용될 수 있다.

  • PDF

고 에너지 광자선의 조사선량 측정 시 전리함의 스템효과 보정계수 (Stem Effect Correction Factor of Ionization Chamber in Exposure Measurements of High Energy Photons)

  • 박철우;이재승;권대철;차동수;김진수;김경근
    • 대한디지털의료영상학회논문지
    • /
    • 제12권1호
    • /
    • pp.51-58
    • /
    • 2010
  • Ionization chambers often exhibit a stem effect, caused by interactions of radiation with air near the chamber end, or with dielectric in the chamber stem or cable. In this study measured stem effect correction factor for length of ionization chamber from medical linear accelerator recommend to with the use of stem correction method. For a model of the Farmer-type chamber, were used to calculate the beam quality correction factor. These interactions contribute to the apparent measured exposure. Additionally, it needs to consider ionization chamber use of small volume and stem effect of cable by a large field. Linear accelerator generated photons energy and increased dose repeatedly measured by using stem correction method. Stem effect was dependence of the energy and increases with photon energy conditions improved of beam quality. In conclusion, stem effect correction factor was measured within 0.4% calculated according to the exposures stem length and also supposed to determined below 1% of another stem correction method.

  • PDF

그림자효과 보정을 통한 영상융합 품질 향상 가능성 (Potential for Image Fusion Quality Improvement through Shadow Effects Correction)

  • 손홍규;윤공현
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2003년도 추계학술발표회 논문집
    • /
    • pp.397-402
    • /
    • 2003
  • This study is aimed to improve the quality of image fusion results through shadow effects correction. For this, shadow effects correction algorithm is proposed and visual comparisons have been made to estimate the quality of image fusion results. The following four steps have been performed to improve the image fusion qualify First, the shadow regions of satellite image are precisely located. Subsequently, segmentation of context regions is manually implemented for accurate correction. Next step, to calculate correction factor we compared the context region with the same non-shadow context region. Finally, image fusion is implemented using collected images. The result presented here helps to accurately extract and interpret geo-spatial information from satellite imagery.

  • PDF

수용가용 STATCOM을 이용한 3상 유도전동기의 이론적인 역률 보상 (The Theoretical Power-factor Correction of a 3-phase Induction Motor using Customer STATCOM)

  • 임수생;이은웅;최재영;김홍권
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제49권7호
    • /
    • pp.475-482
    • /
    • 2000
  • This paper presents a novel power-factor correction method using customer STATCOM which generally improves the power quality of electric customers. Customer STATCOM detects the reactive currents of a induction motor(IM) and so injects compensation currents which is in 180$^{\circ}$ phase with load currents that the reactive power of IM is compensated. In particular, the paper proposes the general compensation current references in the synchronous coordinate system and makes converter output voltages using space-vector PWM. The compensation effect of customer STATCOM is confirmed through the simulation according to the operation condition of an induction motor (at no load and full load).

  • PDF

Automatic Power Factor Correction Using a Harmonic-Suppressed TCR Equipped with a New Adaptive Current Controller

  • Obais, Abdulkareem Mokif;Pasupuleti, Jagadeesh
    • Journal of Power Electronics
    • /
    • 제14권4호
    • /
    • pp.742-753
    • /
    • 2014
  • In this paper, a new continuously and linearly controlled capacitive static VAR compensator is proposed for the automatic power factor correction of inductive single phase loads in 220V 50Hz power system networks. The compensator is constructed of a harmonic-suppressed TCR equipped with a new adaptive current controller. The harmonic-suppressed TCR is a new configuration that includes a thyristor controlled reactor (TCR) shunted by a passive third harmonic filter. In addition, the parallel configuration is connected to an AC source via a series first harmonic filter. The harmonic-suppressed TCR is designed so that negligible harmonic current components are injected into the AC source. The compensator is equipped with a new adaptive closed loop current controller, which responds linearly to reactive current demands. The no load operating losses of this compensator are negligible when compared to its capacitive reactive current rating. The proposed system is validated on PSpice which is very close in terms of performance to real hardware.

국내 계통 특성을 고려한 IEC61000-4-15 Edition 2 기반의 디지털 플리커 미터 알고리즘 구현 및 평가 (Implementation and Performance Evaluation of Digital Flickermeter Algorithm According to IEC61000-4-15 Edition 2 for Korean Distribution Power System)

  • 신훈철;한수경;박상호;김건중;조수환
    • 전기학회논문지
    • /
    • 제66권7호
    • /
    • pp.1017-1024
    • /
    • 2017
  • The International Electrotechnical Commission(IEC) 61000-4-15 is a standard proposing techniques for a flicker meter test and measurement method. The IEC61000-4-15 ed1 announced in 1997 was not include tests for accurate verification. Also it was not explained flicker meter algorithm that can be directly applied to the other power systems. But the new edition of IEC61000-4-15 ed2 prescribes a variety of tests for verify flicker meter algorithm and it explains 'correction factor' used for measuring flicker in other power systems. It can measure flicker severity in 220V system by multiplying correction factor to the measured values with the 230V algorithm. This paper compared the method of measuring flicker severity in korea power system using the correction factor and the modified weighting filter, after verifying of digital flicker meter algorithm created by using matlab based on IEC61000-4-15 ed2.

수용가에 설치된 캐패시터 뱅크의 역률개선 및 고조파 저감에 관한 연구 (A Study on the Power Factor Correction and Harmonics Reduction of Capacitor Banks installed at Customers)

  • 김경철;최형범
    • 조명전기설비학회논문지
    • /
    • 제22권8호
    • /
    • pp.12-17
    • /
    • 2008
  • 대부분의 수용가 부하와 전력 설비는 근본적으로 유도성이고 지상 역률로 운영되고 있다. 수용가에 캐패시터 뱅크를 적용하면 역률 개선과 무효전력 공급, 전압 상승, 전력 손실 저감과 전기요금 저감 등 많은 혜택이 있다. 또한 캐패시터 뱅크를 설치하면 고조파와 같은 전력 품질에 문제를 야기시킬 수 있다. 본 논문에서는 수용가에 설치된 캐패시터 뱅크의 역률 개선 및 고조파 저감을 심도 있게 분석한다. 사례연구 시스템은 EDSA 프로그램으로 시뮬레이션하였다.

전력품질 개선을 위한 단상 전압제어형 능동전력필터 시스템에 관한 연구 (A Study on the Single Phase Voltage-Controlled Active Power Filter for Power Quality Improvement)

  • 손진근
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제52권5호
    • /
    • pp.238-245
    • /
    • 2003
  • In this paper, a single Phase voltage source voltage-controlled active power filter(APF) for power quality improvement was proposed. The proposed APF has the performance of harmonic suppression and unity power factor correction. The performance of harmonic suppression can be obtained by controlling the waveshape of the APF output voltage to be sine wave. And, unity power factor is controlled by the reactive power control loop of the APF output. Simulation and experimental results using diode rectifier showed that the voltage-controlled APF, unlike the current-controlled APF, can reduce the voltage harmonics as well as current harmonics. Also the results showed that the input dover factor and power quality were greatly improved.

고에너지 광자선에 대한 TRS-398 선질보정인자의 직접 계산 (Direct Calculation of TRS-398 Quality Correction Factors for High Energy Photons)

  • 신교철;오영기;김정기;김진기;김기환;정동혁
    • 한국의학물리학회지:의학물리
    • /
    • 제17권1호
    • /
    • pp.54-60
    • /
    • 2006
  • IAEA TRS-398 프로토콜의 임상적 적용을 위하여 고에너지 광자선에 대한 선질보정인자를 직접 계산으로 결정하였다. 본 계산은 상용의 원통형 전리함 모델 7종(A12, IC70, N23333, N30001, N30006, NE2571, PR06C/G)에 대하여 수행되었다. 본 계산결과와 TRS-398의 자료를 비교할 때 대부분의 전리함 및 선질에서 ${\pm}0.3%$ 이내(최대 ${\pm}0.4%$)로 일치하였다.

  • PDF