• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.6
• /
• pp.657-668
• /
• 2014

Under Korea's Enforcement Decree of the Framework Act on Environmental Policy amended in 2013, total organic carbon (TOC) is newly added as water quality parameter to assess organic pollution in water and aquatic ecosystem. To meet the TOC requirement and improve quality of effluent discharged into public watershed, it is also necessary to develop standards for TOC in effluent from public sewage treatment works (PSTWs). In this study, we reviewed the characteristics and removal efficiency of TOC in influent and effluent of PSTWs. The study found that phosphorus treatment process removed not only soluble phosphorus but also a portion of TOC remaining after the secondary treatment process. TOC concentration in effluent from PSTWs operated in tandem with industrial wastewater treatment work was higher due to influx of insoluble substances from the industrial wastewater treatment work. In order to lay a foundation for the management of TOC from PSTWs, it is necessary to carry out research on TOC from different perspectives. For example, studies on the generation mechanism of TOC and the impact of TOC on drinking water resources, assessment of effluent qualities through monitoring, and development of measures to control TOC for the preservation of aquatic ecosystem are needed.

• Convergence Security Journal
• /
• v.7 no.2
• /
• pp.17-25
• /
• 2007

In this paper, an algorithm that provisions proportional differentiation of packet delays is proposed with an objective for enhancing quality of service (QoS) in future packet networks. It features an adaptive scheme that adjusts the target delay every time slot to compensate the deviation from the target delay which is caused by the prediction error on the traffic to be arrived in the next time slot. It predicts the traffic to be arrived at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot. The difference between them is utilized to the delay control operation for the next time slot to offset it. As it compensates the prediction error continuously, it shows superior adaptability to the bursty traffic as well as the exponential rate traffic. It is demonstrated through simulations that the algorithm meets the quantitative delay bounds and shows superiority to the traffic fluctuation in comparison with the conventional non-adaptive mechanism. The algorithm is implemented with VHDL on a Xilinx Spartan XC3S1500 FPGA and the performance is verified under the test board based on the XPC860P CPU.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.31 no.4
• /
• pp.89-109
• /
• 2018

Objectives: The purpose of this systematic review is to assess the effects of herbal medicine with in vitro fertilization-embryo transfer (IVF-ET) based on the current evidence. Methods: Eligible randomized controlled trials (RCT) searched from Pubmed which compared a combination of herbal medicine and IVF with IVF alone were included. Results: Sixteen trials, in which 2025 women involved, were included in this review. The review results showed that the effect of traditional herbal medicine can improve the clinical pregnancy rate (herbal medicine intervention: 30.36~63.64%, Control: 9.38~47.5%) and rate of high quality oocytes and embryos. The mechanism may be through regulating follicular fluid to improve microenvironment for oocytes which would lead to a successful embryo implantation. Conclusions: This analysis showed that combination of IVF and traditional herbal medicine used in the included trials improve clinical pregnancy rate and IVF success. During in vitro fertilization, TCM can regulate the microenvironment in the follicular fluid to mature the oocyte, improve the quality of the embryo, and help the development and implantation of the embryo. Further large randomized placebo controlled trials are needed to confirm the effectiveness of traditional herbal medicine with concurrent IVF.

• Journal of IKEEE
• /
• v.12 no.4
• /
• pp.196-203
• /
• 2008

The IEEE 802.11e working group has announced a new distributed MAC(Medium Access Control) called EDCA(Enhanced Distributed Channel Access) to provide service differentiation among classified traffics. In comparison with the 802.11 legacy MAC, the EDCA provides QoS mechanism by differentiated channel access which is called AC(Access Category) to the frames with different priorities. In multimedia applications, however, the EDCA has some difficulties to achieve QoS throughput because of using fixed AC parameters and never considers overall throughputs, i.e. fairness, for classified services. In this paper, AC parameter control technique is proposed to achieve overall QoS throughputs with differentiated services. The proposed technique controls AC parameters dynamically in real time. Simulation is used to verify the technique and the simulation shows that QoS fairness is improved by 13% in throughput deviation in multimedia environments including voice, video and data service.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.187-193
• /
• 2004

Wireless networks play a very important role in communications today. For example, wireless networks today provide from the basic services like e-mail and FTP to the multimedia applications like Web service. It is obvious that QoS requirements to these diverse applications over wireless networks will continue as in wired networks. Much research has been done to develop QoS supporting algorithms on Internet. But due to the limited bandwidth and varying channel states of the wireless networks, it is difficult to support differentiated service over wireless networks. In this paper we propose the modified wireless token ring protocol supporting QoS to the real-time traffic service node over Internet environments in which non-real-time and real-time traffic service nodes coexist. In the proposed algorithm, the real-time traffic service node gets the priority to take token over the non-real-time traffic service node. So the proposed algorithm support quick transmission of the real-time traffic service node. And this advantage can be obtained with minor modification of the legacy wireless token ing protocol to support QoS. We also consider the lost token recovery mechanism.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.05a
• /
• pp.41-58
• /
• 2003

A recent trend of global shipping industry adopting Port State Control (PSC) system is recognized as a proficient mechanism in preventing costal traffic accident and protecting marine environment. Disadvantages of Korean shipping companies in PSC inspection are unavoidable as Tokyo MOU imposed priority listed flag to Korea. Having stated above, appropriate research and prompt preparation in compliance with current PSC requirements for the Korean shipping companies have become an immediate need. The objectives of this study are : First, to review in understanding of PSC in overall and foundation of enforcement. Second. to study interaction of international treaties regarding PSC. Third, to compare practical compliance among the countries and to open up a case study on Korean shipping companies in adopting PSC. Last, to suggest direction to the Korean shipping companies the most proficient way in compliance with the current Tokyo MOU requirement. Korean flagged vessels have become prioritized target in PSC inspection as Tokyo MOU imposed priority listed flag to Korea due to high detention rate of its fleet. Disadvantage of a priority listed flag is a burden in its proficient fleet operation. This study suggests solutions to the disadvantages as below. : 1) Change shore management system, and provide continuous & quality education to crew members 2) Form a network in sharing PSC information among the Korean shipping companies 3) Form a centralized function in which government, Korean Shipping register and shipowners can treat problems in a prompt manner.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.251-257
• /
• 2014

An actuator system is a type of motor designed to control a mechanism operated by a source of energy, in the form of an electric current by converting energy into some kind of motion. As audio actuators, transforming electric voltage signal into audio signal, speakers and amplifiers are commonly used. In applications of industry, high output power systems are required. For these systems to generate high-quality output, it is essential to control output impedance of audio systems. We have developed an adaptable power supply for driving active amplifier systems with variable loads. Depending on the changing values of resistance of the speaker which produces audible sound by transforming electric voltage signal, the power supply source of the active amplifier can generate the maximum power delivered to the speaker by an adaptable change of loads. The amplifier is well protected from the abrupt increment of peak current and an excess of current flow.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.950-975
• /
• 2016

Device-to-Device (D2D) communication underlaying cellular networks is a promising add-on component for future radio communication systems. It provides more access opportunities for local device pairs and enhances system throughput (ST), especially when mobile relays (MR) are further enabled to facilitate D2D links when the channel condition of their desired links is unfavorable. However, mutual interference is inevitable due to spectral reuse, and moreover, selecting a suitable transmission mode to benefit the correlated resource allocation (RA) is another difficult problem. We aim to optimize ST of the hybrid system via joint consideration of mode selection (MS) and RA, which includes admission control (AC), power control (PC), channel assignment (CA) and relay selection (RS). However, the original problem is generally NP-hard; therefore, we decompose it into two parts where a hierarchical structure exists: (i) PC is mode-dependent, but its optimality can be perfectly addressed for any given mode with additional AC design to achieve individual quality-of-service requirements. (ii) Based on that optimality, the joint design of MS, CA and RS can be viewed from the graph perspective and transferred into the maximum weighted independent set problem, which is then approximated by our greedy algorithm in polynomial-time. Thanks to the numerical results, we elucidate the efficacy of our mechanism and observe a resulting gain in MR-aided D2D communication.

• Journal of Korean Society on Water Environment
• /
• v.32 no.4
• /
• pp.375-383
• /
• 2016

Total Pollution Load Control (TPLC) calculates and manages the allowable pollutant load that is discharged from the watershed, which can meet the water quality target. Delivery Ratio (DR) is generally used for predicting the variation of pollutant mass balance between the pollutants discharged from the watershed and a certain point in the stream, and it is very important for estimation of accurate allowable pollutant load. The concept of DR in TPLC is different from prevalent DR, because DR in TPLC includes both the discharge of pollutants from the watershed and the delivery mechanism. Therefore, DR in TPLC should be estimated by using a proper and unified methodology. The appropriate method and equation for estimation of DR in TPLC was developed through the review of various methodologies, and the applicability of the equation was evaluated in a study area (Geumho A). Determination coefficients (R²) of regression were shown to be relatively high (BOD 0.71~0.87, T-N 0.86~0.90, T-P 0.62~0.69). Applicability of the developed methodology and equations was evaluated as appropriate for TPLC, and it is suggested.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1070-1088
• /
• 2017

Recently, the applications of Internet of Things (IoTs) are growing rapidly. Wireless Sensor Network (WSN) becomes an emerging technology to provide the low power wireless connectivity for IoTs. The IPv6 over low-power wireless personal area networks (6LoWPAN) has been proposed by IETF, which gives each WSN device an IPv6 address to connect with the Internet. The transmission congestion in IoTs could be a problem when a large numbers of sensors are deployed in the field. Therefore, it is important to consider whether the WSN devices have be completely integrated into the Internet with proper quality of service (QoS) requirements. The Software Defined Network (SDN) is a new architecture of network decoupling the data and control planes, and using the logical centralized control to manage the forwarding issues in large-scale networks. In this research, the SDN-based 6LoWPAN Border Router (6LBR) is proposed to integrate the transmission from WSNs to Internet. The proposed SDN-based 6LBR communicating between WSNs and the Internet will bring forward the requirements of end-to-end QoS with bandwidth guarantee. Based on our experimental results, we have observed that the selected 6LoWPAN traffic flows achieve lower packet loss rate in the Internet. Therefore, the 6LoWPAN traffic flows classified by SDN-based 6LBR can be reserved for the required bandwidth in the Internet to meet the QoS requirements.