• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.553-566
• /
• 2009

In-phase control and energy-optimized control are the two major control strategies proposed for series power quality controllers (SPQC). However quantitative analysis and comparison between these two control strategies is quite limited in previous publications. In this paper, an extensive quantitative analysis is carried out on these two control strategies through phasor diagram approach, and a detailed quantitative comparison is conducted accordingly. The load current is used as the reference phasor, and this leads to a simpler and clearer phasor diagram for the quantitative relationship. Subsequently detailed analysis of SPQC using in-phase control and energy-optimized control are provided respectively, under different modes both for under voltage/voltage sag and for over voltage/voltage swell. The closed form analytic expressions and the curves describing SPQC compensation characteristics are obtained. The detailed system power flow is figured out for each mode, and the detailed quantitative comparison between the two control strategies is then carried out. The comparison covers several aspects of SPQC, such as required compensating voltage magnitude, required capacity of energy storage component, and maximal ride-through time. In the end, computer simulation and prototype experimental results are shown to verify the validity of all the analysis and the result of the comparison.

• Journal of Korean Society for Quality Management
• /
• v.32 no.3
• /
• pp.29-44
• /
• 2004

Obtaining and fully understanding the true requirements of customers is hard task. However, successful use of quality function deployment(QFD) depends on capturing customers' requirements and reflecting them during the design of a product. One of common mistakes in QFD is to perform analysis using an inconsistent house of quality(HoQ) chart. This article presents a model for prioritizing customer attributes and design characteristics in order to make a product more attractive to customers. The proposed model modifies the analytic hierarchical process(AHP) with simple pairwise comparison. Our exploration using of QFD identifies how practitioners maintain consistency, whist quantifying HoQ speedily from the customer's perspectives. This paper also identifies and justifies an alternative position on QFD that is supported by statistical examples.

• Journal of the Korean Home Economics Association
• /
• v.26 no.2
• /
• pp.49-67
• /
• 1988

The purpose of this study was to present a conceptual model for predicting housing quality. Housing quality was measured in three ways: perceived quality about physical features of houses, perceived level of the quality in comparison with perceived average level I urban area and housing satisfaction. The specific objectives to achieve the purpose were ; 1) to measure the perceived quality about physical features of houses and perceived level of the quality in comparison with the perceived average level I urban 2) to measure the level of housing satisfaction 3) to clarify the causality between the composite variables of housing quality. A final instrument was developed through two stage pilot surveys. The respondents were 1292 homemakers of middle and high economic class in seoul and Daejeon, selected through stratified random sampling technique. Data were collected during March and April, 1986, and analyzed using SPSS and SAS computer packages. The statistics used were frequency, percentage, F-test, Duncan's Multiple Range, x2, Cramer's V, Multiple linear Regression, Path analysis. The major finding were as follows; the variables significantly related to predict the housing quality were found. The simple, composite variables and 3 measures of housing quality were linked using path analysis, thereby a conceptual model predicting housing quality was suggested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.641-648
• /
• 2006

This study investigates which sound quality indices except SPL raise annoyance response. For investigation, auditory perception experiments for road traffic noise with identical linear SPL were performed by Paired Comparison Method. The numerical results of a Paired Comparison experiment express relative preference about annoyance. So that these relative preference scores are to be correlated to sound quality indices, which are absolute, a transformation is required to go from the relative domain to an absolute and linear scale of preference. The results of the transformation will be the 'merit values,' which quantifies the annoyance(in this case) of the road traffic noise on a linear scale. Using multiple regression, a formula is established that can calculate predicted merit values. Furthermore, This investigation offers a method selecting sound samples that represent various sound quality indices values to use experiment.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.11
• /
• pp.581-588
• /
• 2004

Power qualify monitoring system is devoted to more concern than before, because the innovation of industrial technology needs more accurate instruments and more advanced power quality. This paper was studied on using data of the protective relay by Power Quality Monitor. This paper was proposed the wave storage condition and monitoring clauses of the protective relay as a power quality monitoring device. The protective relay will have problem to save data for PQM analysis because the protective relay memory is limited. Therefore this paper was proposed new a data compression of data got from the protective relay. This method is wave compression comparison algorithm using the DFT. The compression rate is higher than any other established method. This method can be real time storage. This algorithm is verified using the comparison among other compression rate and proved by Real Time Digital Simulator (RTDS).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1224-1227
• /
• 2009

When evaluating the quality of images and displays, it is important to combine the characteristics as perceived by the human visual system and measured by equipment using subjective and objective methods, respectively. In the case of objective methods, the quality of a display is measured using colorimetric or radiometric devices according to existing standards covering the color temperature, gamut size, gamma characteristic, and device characterization. Meanwhile, subjective methods assess the quality of an image using the human visual system based on a comparison with a reference or counterpart using such metrics as the sharpness, noise, contrast, saturation, and color accuracy. Objective and subjective methods are usually used together in comparison, as ultimately it is observers watching images on a display. In addition to existing objective methods, a new image quality metric is also introduced as regards the JPEG compression ratio that is reflected in the relationship between the gamut size and the color fidelity in CIELAB color space.

• Journal of Korean Society for Quality Management
• /
• v.40 no.4
• /
• pp.497-512
• /
• 2012

Purpose: Most major countries have their own set of qualifications called national quality awards to measure the quality of companies and organizations. This study analyzes 3 different national quality awards and compare with the result from Korean quality awards conducted by Ministry of knowledge and Economy and Korea institute for advancement of technology. Methods: We tested 17 technoparks out of 18 technoparks in Korea and see how different the results can be depends on the value weights. We closely looked at each qualifications and tables of different countries' awards and compared with one used in Korea. Finally we proposed some suggestions to use not only domestic model but also international ones to be objective and add efficiency to organizations. Results: Depend on similarity of qualifications and weights, there were countries with different results and these caused score and ranking changes. Nevertheless, there was a comparison that did not make any changes on both score and ranking. Conclusion: We recognized the limitation that a standardized quality variation cannot be enough sources to test and analyze technoparks with different size and criteria. Integrating global standards and flow would be the first step to help grow technoparks and organizations placed in Korea in days to come.

• Journal of Digital Convergence
• /
• v.9 no.5
• /
• pp.253-263
• /
• 2011

In this study of the domestic high school and middle school students to use the online education-website to measure the quality of service between SERVPERF model and the KS-SQI model fits which were analyzed further. Analysis using AMOS 7, SERVPERF for measuring quality of service reliability, responsiveness, assurance, empathy and tangibility, was a measurement model. KS-SQI for primary needs fulfillment, unexpected benefit were performance dimensions, reliability, individual empathy, positive assistance, accessibility and media tangibility, consist of process dimension was measured. In comparison of two models, the KS-SQI model on a path analysis showed better in terms of model fit indexes.

• Human Ecology Research
• /
• v.60 no.4
• /
• pp.595-607
• /
• 2022

This study aims to clarify the relationship between family policy and children's quality of life through an international comparison and to determine which family policy factors contribute to children's quality of life. The research question is "How can family policies be combined to improve children's quality of life in terms of health and economy?" It includes nine categories of family policies related to money, service, and leave. Measures of children's quality of life include low birth weight, infant mortality, and child poverty. Using the OECD Family Database, and the OECD Child Well-being Data, fuzzy-set Qualitative Comparison Analysis (fsQCA) was used among 20 OECD countries. Combinations of family policies significant to the children's quality of life were derived from the results. This study contributes to the literature by revealing the effectiveness of states' investment in family policy. In addition, the study indicates that since family policies interact with each other, those policies combine to improve children's quality of life.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.696-704
• /
• 1998

Artificial neural networks (ANN) have successfully applied into various areas. But, How to effectively established network is the one of the critical problem. This study will focus on this problem and try to extensively study. Firstly, four different learning algorithms ANNs were constructed. The learning algorithms include backpropagation, simulated annealing, genetic algorithm, and tabu search. The experimental results of the above four different learning algorithms were tested by statistical analysis. The training RMS, training time, and testing RMS were used as the comparison criteria.