• Journal of the military operations research society of Korea
• /
• v.16 no.1
• /
• pp.18-34
• /
• 1990

In light of the recent developments of transitory nature, it is likely that national defense decision-making will be more difficult to make for years to come. In other words, sudden changes in security environment would call into question the basic assumptions on which we have built our national defense planning and increase the number of the uncertain factors in the decision-making process; the subdivision and ramification of national defense management would increase the factors for decision-making and complicate even further the mutual interactions among these factors; the accelerated pace of sophistication and diversification of weapon systems and military technology would increase the risk of failure and system costs geometrically; and the reduced level of acceptance among the people on the sanctification of national defense in proportion to the rapid progress toward a more democratic and industrial society would engender an increased criticism or checking role by the National Assembly or by the mass media. As the changes in national defense environment and conditions create an innumerable number of new tasks, this paper intends to suggest a few core policy measures to improve the quality of national defense decision-making. More specifically, it proposes to 1) eradicate entirely the bureaucratic behavior and tendencies; 2) utilize actively the brain staff for quality assurance of decision-making; 3) and introduce and apply as a whole set, a total system, or an incorporated pack age the PPBEES(Planning-Programming-Budgeting-Executing-Evaluating-System)/LCMM (Life-Cycle Management Model for System Acquision), the OR/SA(Operations Research/Systems Analysis), and DMIS (Defense Management Information System).

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.2
• /
• pp.108-111
• /
• 2015

Purpose Lately, in accordance with the increasing interest about Healthcare accreditation program and International laboratory accreditation scheme, requirements about the instrument quality management are gradually taking shape. In nuclear medicine In vitro laboratory, the most typical instruments are multi detector gamma counter and automatic dispensing system. Each laboratory continue with the quality control adequate for circumstances. The purpose of this study is to application and establish the new Calibrator[I-125]Set which is efficient at standardization of equipment quality management. Materials and Methods Deviation between detectors were measured with 12 solid samples of the Calibrator[I-125]Set. their activities differ from each other by less than 1%. Multi detector gamma counters are GAMMA-10;Shinjin medics. Inc, Goyansi, Korea(Gamma counter A), SR300;Stratec biomedical systems AG, Gewerbestr, Germany(Gamma counter B) and COBRA II; Packard Instrument Co. Inc, Meriden, USA(Gamma counter C). Evaluation of two automatic dispensing system used A, B liquid tracer of the Calibrator[I-125]Set. After dispensing and counting, calculated using the ratio of the measured value and proposed value. We used solution A for 20, 25ul and solution B for 50, 100ul. Method of data analysis and reference range was provided by kit documentation. Furthermore, we could calculate our counter efficiency indirectly. Results The CV(%) of measured values by Gamma counter A, B, C are 0.34, 0.70, 1.30. Calculated value are 1.05314, 2.10419, 4.08485. Provided reference range is less than 3. A dispensing system's calculated values are 0.986, 0.989, 1.023, 1.017 and B are 0.874, 0.725, 1.021, 0.904. Provided reference range is from 0.95 to 1.05. Also, counter's efficiency are 74.18, 72.79, 74.32% at counter A, B, C and efficiency of the one detector counter is 79.26%. Conclusion If using this Calibrator[I-125]Set after verifying whether quality assurance, is applicable to equipment quality management on behalf of the role of gold standard.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.49-58
• /
• 2017

The DQMS (Defence Quality Management System) is a certification system that manages participating companies to improve the quality of munitions. Since Korean Defense Specification (KDS) for DQMS certification that was established by adding military requirements based on the ISO quality standard, many companies complain that they should pay too much effort into the preparation process. However, it is hard to find helpful information on the preparation process because we have been only interested in the effect of DQMS acquisition. The purpose of this paper is to provide helpful information to companies preparing for DQMS certification. We surveyed the degree of difficulty and importance of the DQMS requirements from the companies with certification experience, and performed IDA (Importance-Difficulty analysis) by dividing the companies into the main contractor and the subcontractor. The result of IDA shows that there is a different recognition to the DQMS certification between main-contracting and sub-contracting companies. Subcontractor has more difficulties than main contractor in preparing the DQMS certification. In addition, we are able to identify the difficult and important requirements in the preparation process to the DQMS certification. Both main contractor and subcontractor have difficulty to the requirements related to configuration or validation such as 'customer controls configuration', 'configuration review shall be implemented' and 'design and development validation documentation.' The requirements related to customers are important to main contractor but the subcontractor regards difficult requirements as important ones. The result of this paper would be helpful to both the company preparing for DQMS and the munitions quality assurance agency.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.104-108
• /
• 2001

In this paper, the 3-D measurement method of moving object with a laser and one camera system for image processing method is presented. The method of segmentation image in conventional method, the error are generated by the threshold values. In this paper, to improve these problem for segmentation image, the calculation of weighting factor using brightness distribution by histogram of stored images are proposed. Therefore the image erosion and spread are improved, the correct and reliable informations can be measured. In this paper, the system of 3-D extracting information using the proposed algorithm can be applied to manufactory automation, building automation, security guard system, and detecting information system for all of the industry areas.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.177-180
• /
• 2012

Korea residential housing generally use wet floor heating system 'Ondol' which consist of insulation cushioning, lightweight foamed concrete, hot water pipe and mortar on top of reinforced concrete slab. Wet floor heating system's installation process is too complicate and difficult to supervise field for continuing assurance quality. Also, this method has a huge impact on the progress of construction because it take a long time to cure finishing mortar and lightweight foamed concrete. Therefore, it is considered a disturbance factor of reduction of construction duration for enhancing competitiveness. In this study, we conducted an experiment about the radiant heat performance and temperature difference on upper panel of rolled dry floor heating systems which is jointly developed by Kolon global and Sumisho Metalex for remodeling housing, studio apartment and the urban-life housing.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.97-106
• /
• 1997

Software reuse techniques make reapplication of various well-organized information knowledge to system development so that improve productivity and make it easy to maintain software. This paper describes the design and implementation of CSORUS(C and C++ SOurce ReUse System) which can extract reuse components using reverse engineering, and store, retrieve, merge them written with C of C++ programming language. The construction components using reverse engineering has advantage in quality assurance because they are reliable components already tested in real environments.

• Journal of Aerospace System Engineering
• /
• v.7 no.3
• /
• pp.58-64
• /
• 2013

The paper presents the comprehensive studies of ISTQB(International Software Testing Qualification Board) for the reliable software development system in term of various aspects. It is critical to understand how the software testing is achieved is to efficiently manage the development process, to reduce the development cost, and to ultimately ensure the safety of the entire software system. This study may provide an enriched understanding about the rationale and true intent the behind software development model and testing design methods of ISTQB on software developer, test analysts, test engineers. In addition, this paper may serve as a useful supplementary material for the avionic engineers to establish the new regulations in avionic industries.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.863-868
• /
• 2001

It is necessary to design th anti-vibration system of precision machinery for a sound operation and a quality assurance. However, in general. the allowable vibration limit is not well known. In the paper, the vibration criteria for foundation of vibration sensitive machinery is proposed and anti-vibration system is designed by using vibration measurement results of foundation. Also, the F.E. analysis is performed to verify the effectiveness of a designed anti-vibration system and to determine allowable dynamic load of machinery

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.45-52
• /
• 2012

CC does not Contain detailed instructions about evaluation document. So, we must develop document schema to make CC-based evaluation system. In this report, we developed document schema that can be used in CC-based evaluation system. We devloped document schema and DTD that applying Weakest precondition function, reduction rules about amount of document and dependancy analysis document from assurance class within CC. Approach of this study can be applied to develop document and DTD that can be used in evaluation system of software quality.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.6
• /
• pp.789-794
• /
• 2014

The increasing cross-border mobility of dental school or dental hygiene students, educators, practitioners, programs and providers takes challenges for existing national quality assurance and accreditation frameworks and bodies, as well as for the systems for recognizing foreign qualifications. The new dental hygiene accreditation system was introduced to encourage the improvement of dental hygiene programs, to ensure the quality of education and, most of all, to establish an internationally compatible system of evaluation and accreditation. The accreditation procedure takes 1 year to complete. The result of the accreditation is released after evaluation via self-study report, site visit, preliminary draft report, responses from the institution and the results from the conciliation and review committees. The result from the accreditation procedure is either 'accreditation' or 'no accreditation'. Accredited schools receive one of several statuses following the evaluation. These are next general review, interim report and interim visit or suspension. Dental healthcare quality is not improved instantaneously, but instead gradually through continuous communication within the dental field. For this accreditation system to be successful, the following are essential: the accreditation agency should adopt hygiene education accreditation; it needs to become financially independent and managed efficiently; the autonomy and regulations surrounding the system need to be balanced; the professionalism of the system is ensured; and the dental field which includes not only dental program, but also hygiene program, needs to play an active role in the operation of the system.