• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.3
• /
• pp.193-202
• /
• 2008

In Korea, domestic consumption of barley as a cereal crop has been decreasing since the 1980s. It has been considered that winter-season crop production could enhance the global competitiveness of domestic livestock industry by providing better quality fodder to livestock and enhancing field use rate. Therefore, the purpose of barley cultivation for cereal food production has been recently replaced by the production of forage barley. Consequently, the area of barley cultivation for forage is markedly increasing in Korea. Forage barley is cultivars especially as forage for cattle. While any type of barley can be used as forage for feeding cattle, forage barleys deliver a higher dry matter yield than conventional feed barley. We have developed forage barley cultivars with cattle's favorite characters such as smooth awn, hood and auricleless types. Cultivar Wooho, Yuyeon, and Dami have smooth awn, hood type spike, and auricleless type plant. We also developed rough awn type barley cultivars, such as Yongyang, Sunwoo, Sangweon, and Soman, showing earlymaturing and high-yielding. They showed about 12 to 10 ton ha－1 in dry matter yield (average 33 ton $ha^{-1}$ in fresh matter yield). And these were evaluated by forage quality which showed a higher grade of silage quality (TDN, ADF, NDF, CP, etc.) for whole crop barley use. Based on these results, it indicated that barley with smooth awn, hooded, and auricleless could be suitable sources in breeding for whole crop forage use.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1317-1317
• /
• 2024

As climate change escalates extreme weather events, the structural durability of plastic greenhouses, constituting 90% of Korea's facility agriculture, emerges as a critical issue. These greenhouses are pivotal for year-round crop cultivation and high-quality agricultural production. In 2021, collapses caused around US$2 million in damages, mainly due to heavy snowfall and strong winds, accounting for 97% of incidents. The Korean Ministry of Agriculture responded by disseminating disaster-resistant standardized designs, yet more robust standards are needed. Current designs rely on elastic analysis, but plastic greenhouses display nonlinear behavior due to factors like residual stress and local buckling. Our study employs a refined plastic hinge method and finite element analysis to analyze structures, considering progressive yielding. We conducted loading tests using scale down models of plastic greenhouses in accordance with similitude laws. Based on these tests, the deformation of models under different load conditions was measured and compared with the deformation of greenhouse using our nonlinear structural analysis. This study will contribute to the development of reliable design criteria for plastic greenhouses in response to climate extremes such as heavy snowfall and typhoons. In addition, by identifying the deformation characteristics of plastic greenhouses due to loads, it can contribute to establishing usability standards for greenhouses, and reinforcement measures for vulnerable areas which are easily deformed under load can be considered.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.spc1
• /
• pp.123-144
• /
• 1996

This review deals briefly with the various medicinal components(mainly saikosaponins), their biological activities and the variation of their contents by different cultivation environment and plant parts in Bupleurum species. Bupleuri radix, a crude drug, is the root of Bupleurum falcatum L. (Korea, Japan), B. chinense(China), and their related species (Umbelliferae). There are over 120 species in Bupleurum genus throughout world, mainly Asian area, and over 5 species in Korea, investigated up to now. These plants contain many physiological active compounds and the principal components are saikosaponins. Major activities of this crude drug and saikosaponins are the anti-inflammatory and antihepatotoxic activities. Saikosaponins and their derivatives in Bupleurum spp. have been chemically studied, isolated and identified over 70 compounds in over 50 species. Other components, physiologically active ones, also have been investigated, which are the groups of lignan, flavonoid, essential oil, polyacetylene, polysaccharide, etc. Saikosaponins belong to the group of triterpenoid saponin chemotaxonomically and occur the accumulation and turnover in plant tissues through secondary metabolism, mevalonic acid pathway. The contents and kinds of saikosaponins and other components in Bupleurum spp. plants are various due to different species and growing environments, as the plant growth characters and yield are various. Most of medicinal plants as well as Bupleurum species are very useful as agricultural products and traditional medicines, and also are very valuable as genetic resources and natural products. So we need to collect, evaluate, preserve, and utilize various medicinal plants, and also to under-stand secondary metabolism and improve the breeding and cultivation techniques for the safe production of crude drugs with high quality and yielding.

• Journal of Forest and Environmental Science
• /
• v.25 no.1
• /
• pp.1-24
• /
• 2009

Teak (Tectona grandis) is one of the most valuable timber yielding species in the world, with predominant distribution in tropical or sub-tropical countries. However, natural teak available only in few countries like India, Myanmar, Laos People's Democratic Republic and Thailand. Teak grows well in deep, well-drained alluvial soils, fairly moist, warm, tropical climate with pH ranges from 6.5-7.5. Teak is cultivated in many Asian, African and South American countries for timber production. The global teak plantations are estimated to be three million hectare with major share in India (44%) followed by Indonesia (33%). India is considered as richest genetic resources of teak with large areas of natural teak bearing forests (8.9 million ha), plantations (1.5 million ha), clonal seed orchards (1000 ha) and seed production areas (5000 ha). The studies on diversity of teak populations showed that teak is an out crossing species with major portion of diversity present within the populations. The productivity and quality of teak timber varies depending upon the site and environmental conditions. Teak wood is moderately heavy, strong and tough,straight grained, coarse textured and ring porous with specific gravity varies from 0.55 to 0.70. The sapwood is white to pale yellow in colour and clearly demarcated while heartwood is dark brown or dark golden yellow in colour. Teak is one of the most durable timbers in the world, practically, impervious to fungus and white ant attack and resistant to decay. Teak wood is used in ship and boat constructions, furnitures and aesthetic needs. Genetic improvement programmes have been undertaken in countries like Thailand, India, Malaysia and Indonesia. The programme includes provenance identification and testing, plus tree selection and clonal multiplication, establishment of seed orchards and controlled hybridization. Several aspects like phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting and marketing, wood properties and future tree improvement strategy to enhance productivity have been discussed in this paper.

• Membrane and Water Treatment
• /
• v.15 no.4
• /
• pp.163-176
• /
• 2024

Asymmetric flat sheet poly(vinylidene fluoride) (PVDF) membranes were fabricated using the phase inversion technique, employing four distinct solvents with varying solubility power: N, N-dimethylacetamide (DMAc), N, N-dimethylformamide (DMF), Dimethyl sulfoxide (DMSO), and N-Methyl-2-pyrrolidone (NMP). The influence of these solvents on the crystalline properties of the polymers was investigated using X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR) to elucidate their role in PVDF polymorphism during membrane formation. Our findings revealed significant variations in membrane crystalline phase due to the dissolution of PVDF in different solvents, with α-polymerization predominant in membranes cast with NMP and DMSO, while DMF and DMAc solvents favored β-type polymerization. Further, various additives including PEG-400, TiO2, LiCl, LiBr, acetone, ethanol, propanol, and water were employed to evaluate their impact on membrane morphology and properties. Scanning electron microscopy (SEM) and Ultimate testing machine (UTM) were utilized to analyze membrane morphology, while the tensile strength, contact angle, pore size, and porosity were estimated using the sessile drop method, imageJ, and gravimetric method, respectively. Our results demonstrated that all additives exerted influence on membrane morphology and properties depending on their characteristics and interactions with solvents and polymers. Notably, acetone, being volatile, facilitated the formation of a thin PVDF layer on the membrane surface, resulting in a reduced average pore size (0.18㎛). Conversely, LiCl and LiBr acted as pore-forming additives, yielding membranes with distinct pore characteristics and porosity. Moreover, water as a non-solvent additive induced pregelation during the nonsolvent-induced phase separation (NIPS) process, thereby promoting pore formation (53% porosity) and enhancing membrane hydrophobicity (104° contact angle). To evaluate the quality of synthesized membranes, permeate flux ranging from 16.2 L/m².hr to 27.9 L/m².hr with a salt rejection rate of 98 %, was evaluated using Vacuum Membrane Distillation (VMD).

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.2
• /
• pp.175-182
• /
• 2002

A new high yielding mulberry genotype, Victory-1 (V-1) was recommended to the field for irrigated areas by Central Sericultural Research and Training Institute (CSRTI), Mysore during 1996-1997. As K-2 and S-36 mulberry genotypes are already in the field, a study on the comparative performance of V-1, 5-36 and K-2 varieties, in terms of leaf yield, yield attributes, leaf moisture and moisture retaining capacity and their impact on silkworm rearing was carried out under Telangana conditions of Andhra Pradesh during 1999-2001. Among the three genotypes the leaf yield was found to be significantly (P < 0.01) higher in V-1 (64,130 kg/ha/yr) followed by S-36 (44,064 kg/ha/yr) and K-2 (23,990 kg/ha/yr). The maximum leaf moisture was also observed in V-1 (71.84%) compared to S-36 (66.86%) and K-2 (64%). The moisture retaining ability was more in V-1 (70.17%) followed by S-36 (66.20%) and K-2 (60.08%). The yield attributes were found to be significantly (P < 0.01) enhanced in V-1 over S-36 and K-2. Silkworm rearing results (bioassay) indicated a significant (P < 0.01) reduction in larval duration and improvement in larval weight, effective rate of rearing by number and weight, single cocoon and shell weights and shell ratio in the silkworm lots fed on V-1 variety followed by S-36 and K-2. Hence, in this study, V-1 was found to be superior among the three varieties studied.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.4
• /
• pp.316-321
• /
• 2003

Analysis of breeding gains in grain yield has been intensively conducted in wheat, barley, oat, maize, and soybean. Such information is limited in rice. The objective of this study was to compare the breeding gains and cultural gains contributed to yield gains of Korean rice varieties since early 1900s. Two sets of yield data were used for analysis; the historical yield data of 1908 for old japonica cultivars, and present yield data in the years from 1996 to 1998 for the six cultivars, consisting of previous two old cultivars and four contemporary cultivars. The old cultivars were two native cultivars, Jodongi and Damageum, while contemporary cultivars were two premium quality japonica cultivars, Hwaseongbyeo and Dongjinbyeo, and two Tongil-type cultivars, high yielding cultivars developed from indica/japonica hybridization, Milyang23 and Dasanbyeo. The yield differences of old cultivars between the experiments in 1908 and the experiments from 1996 to 1998 were estimated as cultural gains (1.84 tons $\textrm{ha}^{-1}$) due to the improvement of cultivation technology. Yield differences between the old cultivars and contemporary cultivars were considered total yield gains during the periods. These were 2.51 tons $\textrm{ha}^{-1}$ for japonica cultivars and 3.81 tons $\textrm{ha}^{-1}$ for Tongil-type cultivars. From these data, the genetic gain of 0.67 tons $\textrm{ha}^{-1}$ and 1.97 tons $\textrm{ha}^{-1}$ were estimated for japonica cultivars and Tongil-type cultivars respectively. The ratio between cultural gain and genetic gain appeared to be 2.7:1 for japonica cultivars and 1:1 for Tongil-type cultivars. This analysis clearly showed the higher genetic contribution in Tongil-type cultivars than in japonica cultivars, suggesting a guideline to be used when planning new yield improvement programs. Additional implication has emerged when a better yield response to modem cultivation technology was found in one of the old cultivars, suggesting the combined improvement between breeding and cultural improvement is necessary for attaining the maximum yield capacity of a crop.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.4
• /
• pp.459-463
• /
• 2015

This study evaluated the microbial conversion of coconut oil waste, a major agro-residue in tropical countries, into single cell oil (SCO) feedstock for biodiesel production. Copra cake was used as a low-cost renewable substrate without any prior chemical or enzymatic pretreatment for submerged growth of an oleaginous tropical mangrove fungus, Aspergillus terreus IBB M1. The SCO extracted from fermented biomass was converted into fatty acid methyl esters (FAMEs) by transesterification and evaluated on the basis of fatty acid profiles and key fuel properties for biodiesel. The fungus produced a biomass (8.2 g/l) yielding 257 mg/g copra cake SCO with ~98% FAMEs. The FAMEs were mainly composed of saturated methyl esters (61.2%) of medium-chain fatty acids (C12-C18) with methyl oleate (C18:1; 16.57%) and methyl linoleate (C18:2; 19.97%) making up the unsaturated content. A higher content of both saturated FAMEs and methyl oleate along with the absence of polyunsaturated FAMEs with ≥4 double bonds is expected to impart good fuel quality. This was evident from the predicted and experimentally determined key fuel properties of FAMEs (density, kinematic viscosity, iodine value, acid number, cetane number), which were in accordance with the international (ASTM D6751, EN 14214) and national (IS 15607) biodiesel standards, suggesting their suitability as a biodiesel fuel. The low cost, renewable nature, and easy availability of copra cake, its conversion into SCO without any thermochemical pretreatment, and pelleted fungal growth facilitating easier downstream processing by simple filtration make this process cost effective and environmentally favorable.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.495-502
• /
• 2016

Italian Ryegrass (IRG), which is known as high yielding and the highest quality winter annual forage crop, is grown in mid-south area in Korea. The objective of this study was to evaluate the use of unmanned aerial vehicle (UAV) for the monitoring IRG growth. Unmanned aerial vehicle imagery obtained from middle March to late May in Nonsan, Chungcheongnam-do. Unmanned aerial vehicle imagery corrected geometrically and atmospherically to calculate normalized difference vegetation index (NDVI). We analyzed the relationships between $NDVI_{UAV}$ of IRG and biophysical measurements such as plant height, fresh weight, and dry weight over an entire IRG growth period. The similar trend between $NDVI_{UAV}$ and growth parameters was shown. Correlation analysis between $NDVI_{UAV}$ and IRG growth parameters revealed that $NDVI_{UAV}$ was highly correlated with fresh weight (r=0.988), plant height (r=0.925), and dry weight (r=0.853). According to the relationship among growth parameters and $NDVI_{UAV}$, the temporal variation of $NDVI_{UAV}$ was significant to interpret IRG growth. Four different regression models, such as (1) Linear regression function, (2) Linear regression through the origin, (3) Power function, and (4) Logistic function were developed to evaluate the relationship between temporal $NDVI_{UAV}$ and measured IRG growth parameters. The power function provided higher accurate results to predict growth parameters than linear or logistic functions using coefficient of determination. The spatial distribution map of IRG growth was in strong agreement with the field measurements in terms of geographical variation and relative numerical values when $NDVI_{UAV}$ was applied to power function. From these results, $NDVI_{UAV}$ can be used as a new tool for monitoring IRG growth.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.1-9
• /
• 2006

The single lap joint is the most studied joint in the literature in terms of both theory and practice. It is easy to manufacture and the lap shear strength is a useful value for strength assessment and quality control. Simple design rules exist such as the one present in standard ASTM 1002 or in a recent paper by Adams and Davies. The main factors that have an influence on the lap shear strength are the type of adhesive, i.e. ductile or brittle, the adherend yield strength and the overlap length. The overlap increases the shear strength almost linearly if the adhesive is sufficiently ductile and the adherend does not yield. For substrates that yield, a plateau is reached for a certain value of overlap corresponding to the yielding of the adherend. For intermediate or brittle adhesives, the analysis is more complex and needs further investigation. In order to quantify the influence of the adhesive, the adherend and the overlap on the lap shear strength, the experimental design technique of Taguchi was used. An experimental matrix of 27 tests was designed and each test was repeated three times. The influence of each variable could be assessed as well as the interactions between them using the statistical software Statview. The results show that the most important variable on the lap shear strength is the overlap length followed by the type of adherend.