• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.13-20
• /
• 2022

IEEE 802.11ay Wi-Fi is the next generation wireless technology and operates in mmWave band. It supports the MU-MIMO (Multiple User Multiple Input Multiple Output) transmission in which an AP (Access Point) can transmit multiple data streams simultaneously to multiple STAs (Stations). To this end, the AP should perform MU-MIMO beamforming training with the STAs. For efficient MU-MIMO beamforming training, it is important for the AP to estimate signal strength measured at each STA at which multiple beams are used simultaneously. Therefore, in the paper, we propose a deep learning-based link quality estimation scheme. Our proposed scheme estimates the signal strength with high accuracy by utilizing a deep learning model pre-trained for a certain indoor or outdoor propagation scenario. Specifically, to estimate the signal strength of the multiple concurrent beams, our scheme uses the signal strengths of the respective single beams, which can be obtained without additional signaling overhead, as the input of the deep learning model. For performance evaluation, we utilized a Q-D (Quasi-Deterministic) Channel Realization open source software and extensive channel measurement campaigns were conducted with NIST (National Institute of Standards and Technology) to implement the millimeter wave (mmWave) channel. Our simulation results demonstrate that our proposed scheme outperforms comparison schemes in terms of the accuracy of the signal strength estimation.

• Journal of Distribution Science
• /
• v.8 no.4
• /
• pp.17-23
• /
• 2010

The Banking industry is expanding rapidly. To keep the competitive advantages, participating companies concentrate their resource to provide the distinguishable services by increasing the service quality. This study is to find that how three kinds of service quality(process, output, and service environment) affect on the customer satisfaction. In this paper, WPCSI (Weighted Potential Customer Satisfaction Index) was developed using Kano model and PCSI. Kano's model of service quality classification was used to improve customer satisfaction, customer satisfaction index was calculated. Customer satisfaction index was calculated using the existing potential for improving customer satisfaction index (PCSI Index) to complement the limitations of the weighted potential improve customer satisfaction index (WPCSI) were used. Analysis using PCSI improve the quality of service levels may be useful in assessing. However, this figure is a marginal degree of importance on customers and quality characteristics have been overlooked but has its problems. A service provided to customers with some important differences depending on the interpretation of the scope for improvement is to be classified. In other words, the level of customer satisfaction and the satisfaction of the current difference between the comparison factor for the company to provide information about the priority of the improvement was not significant. Companies are also considered important that the customer does not consider the uniform quality of service provided can be fallible. In this study, the weighted potential to improve it improve customer satisfaction index (WPCSI) proposed a new customer satisfaction index. This is for customers to recognize the importance of quality characteristics by weighting factors, to identify practical and improved priority to provide more useful information than has been. Weighted potentially improve customer satisfaction index (WPCSI) presented in this study by the customers aware of the importance of considering the quality factor is an exponent. The results, 'Employees' working ability', 'provided the desired service level', 'staff to handle this task quickly enough' to the customer of the factors had significant effects on satisfaction are met. On the other hand 'aggressiveness on the product description of employees', 'service environment as a whole, beautiful enough to' meet and shows no significant difference between satisfaction. But 'aggressiveness on the product description of employees' and reverse (逆) were attributable to the quality. Small dogs and overly aggressive products that encourage the customer dissatisfaction that can result in widening should be careful because the quality factor can be said. As a result, WPCSI is more effect to find critical factors which can affect customer satisfaction than PCSI. After that, we discuss effects and advantages of customer satisfaction using WPCSI. This study, along with these positive aspects, the limitations are implied. First, this study directly to the bank so that I could visit any other way for customers, utilizing the Internet or mobile to take advantage of the respondents were excluded from the analysis. Second, in survey questionnaires can help improve understanding of the measures will be taken. In addition to the survey targeted mainly focused on Seoul, according to a sample, so sampling can cause problems is the viscosity revealed intends.

• Journal of Distribution Science
• /
• v.10 no.4
• /
• pp.21-28
• /
• 2012

While recent economic stagnation has left consumers dispirited, rapid growth has been seen in the domestic coffee industry recently. With the growth in coffee consumption, a tremendous increase in the number of specialty coffee shops has been seen in the domestic coffee market. The expectation that markets specializing in coffee will continue to grow for a long time will cause existing enterprises to expand their shops and increase the rate of entry of new shops. Intense competition in the domestic coffee market will force companies to create a competitive advantage through differentiated marketing strategies. This paper focuses on how the shopping value and repatronage intention of customers using coffee shops is affected by service quality. Moreover, this paper intends to examine the service quality that is critical for the successful management of relationships and the values that are important to consumers. For these purposes, the discriminative effect of service quality on shopping value was analyzed and the effect of utilitarian and hedonic value on repatronage intention was reviewed. The results of this study are detailed below. First, interaction and outcome quality can positively affect the hedonic value, whereas environment quality is not meaningful for utilitarian value. Considering the relative effect on utilitarian value outcome, the effect of outcome quality is greater than that of interaction. This result shows that the role of outcome quality is most important for improving utilitarian value. Second, outcome and environment quality positively affect hedonic value; however, interaction quality does not meaningfully increase hedonic value. These results indicate that customers recognize hedonic value on the basis of their evaluation of the service outcomes and the background to delivery service. In particular, it was revealed that the relative effect of outcome quality on hedonic value is greater than that of environment quality. Third, both utilitarian value and hedonic value had a positive effect on repatronage intention. The relative influence of the hedonic value is that the shopping value affects the repatronage intention more than the utilitarian value. These results mean that customers recognize coffee shops as spaces for satisfying utilitarian and hedonic values, and they place more importance on the benefits of the emotional experience than functional needs. Finally, this study suggests that output quality is more important than other service factors, and the results of this paper give some implications to the coffee shop industry that customers seek utilitarian needs based on economic value and place more weight on hedonic value, such as that offered by relationship media.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.136-146
• /
• 2012

As information technology used for simulation and virtual reality developed, there is a growing interest in animation technologies which will effectively deliver simulation results to users. Various efforts have been made to improve animation performance, like playback quality and speed, input-output speed and storage space reduction. However, earlier studies generally focused on image compression frame by frame. To significantly improve storage space and playback speed, animation data should be vectorized. Also, spatial and temporal duplication have to be removed. In this study, animation data structure was improved fundamentally through establishment of hierarchy and vectorization. Also Spatial and temporal duplication of animation data was removed through vectorization based on train route. As a result, storage space was reduced, input-output speed and playback speed were considerably improved. According to the test, additional Patternization which followed vectorization brought reduction of over 80% in storage space and input-output speed was quadrupled. Patternization technology can be used as a proper storage method of animation data, and can provide user-specific animation by small data transmission.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.344-351
• /
• 2016

In the present study, a dual-band multiple-input-multiple-output (MIMO) antenna covering WLAN frequency bands of 2.4 GHz (2.4 ~ 2.484 GHz) and 5 GHz (5.15 ~ 5.825 GHz) is newly presented to avoid use of decoupling structure for increasing isolation. The antenna consists of two L-shaped slots with n-shaped slots etched on the floating ground plane surrounded by open ended L-shaped slots which are placed in the left and right corner of PCB respectively. The proposed antenna is designed and fabricated on one side of FR4 substrate with dielectric constant of 4.3, thickness of 1.6 mm, and size of $50{\times}50mm2$. It has been observed that the measured impedance bandwidths ($S_{11}{\leq}-10dB$) are 0.3 GHz (2.28 ~ 2.58 GHz) in 2.4 GHz frequency band and 0.89 GHz (5.11 ~ 6 GHz) in 5 GHz frequency band respectively. In addition, It has been observed that the whole efficiency are more than 80 % in the whole operating frequency band and envelope correlation coefficient of the antenna is less than 0.05 as a very small value in spite of nothing of the decoupling structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.746-752
• /
• 2020

As environmental issues have been taken seriously, the number of solar power generation facilities has rapidly increased in Korea. The voltage at the output stage of an inverter increases in a system that connects a small-capacity photovoltaic power generation to low-voltage power distribution. This degrades the quality of the low-voltage distribution system and adversely affects the load facility. In this study, a solution was obtained to increase the voltage at the output stage of the solar inverter according to the connection of the low-voltage distribution system. The voltage can be controlled by using reactive power factor control inverters. If the secondary tap is adjusted, the voltage can be adjusted to about 15 V, but there is a problem in that the tap is not adjusted unless the KEPCO distribution regulation voltage is out of the range of 220±13V. If the number of inverters is limited, the inverter can be started within the inverter overvoltage range. If it is connected to three phases, the voltage is distributed. The results indicated that power factor control and active voltage control inverters were easy to apply in the field.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.2
• /
• pp.107-112
• /
• 2007

Laser wave length can have evaporation effect by absorption because outer skin or tissue of focus is consisted of water almost though absorption of water occurs more than 90% almost in formation thickness of very thin floor. Can operate outer skin, steam by floor and correct incision of formation is available. Suture surgical operation is available to vein or lymph system and surgical operation region can dry and see as eye and radish bleeding surgical operation is available. Specially, stability of tube both end output about pulse by weight very, this research can cause various curative effect because can reduce bulk and control easily current wave style of medical laser using electric power conversion device of high frequency way. If introduce ZVS (Zero Voltage Switching) or ZVZCS (Zero Voltage and Zero Current Switching), is more profitable because can reduce switching damage. Because electric power department of proposed medical laser can do stable soft-switching in wide subordinate extent introducing ZVZCS technique by the first help and control department composes microcontroller, output current waveform user have free form make Result that experiment because design and manufacture, brought result that improve of 20% than existing equipment, and will be bought to get into superior result if supplement as systematic late.

• Journal of Technology Innovation
• /
• v.26 no.1
• /
• pp.85-105
• /
• 2018

This study analyzes the economic impacts of Korean R&D expenditure on the industrial structure by technological levels using 2010~2014 Input-Output table data. The industrial structure is reclassified into 4 manufacturing industries by OECD's Technology Intensity Definition. Then, we analyzes the production-inducing and value added-inducing of those industries. As the results of the analysis, it is found that the production-inducing effect by the R&D expenditure has been higher in the middle-high and middle-low technology manufacturing and that the value added-inducing effect has been higher in the middle-high technology manufacturing. On the other hand, the production and value added-inducing effects has been lower in the high-tech manufacturing which is highest in the R&D expenditure. The above results indicate that industrial structure has not been linked with the quality ladder that expresses the enhancement of tech level through R&D expenditure. Based on these results, the policy recommendation implies that R&D expenditure should be concentrated to improve the production- and value-added effects of the high technology manufacturing in order to advance the industrial structure. However, this study has the limitation that the analyses on the dynamic-inducing effects are not carried out due to the lack of fixed capital formation data.

• Korean Journal of Optics and Photonics
• /
• v.31 no.3
• /
• pp.142-147
• /
• 2020

In this paper, we report highly efficient second harmonic generation of continuous-wave Yb fiber lasers incorporating a periodically poled LiTaO₃ device (MgO:PPSLT) as a frequency converter. The seed laser output from a Yb fiber master oscillator using a Fabry-Perot feedback cavity was amplified in a Yb fiber amplifier stage, yielding 28.5 W of linearly polarized output at 1064 nm in a beam with beam quality, M², of ~1.07. Second harmonic generation was achieved by passing the laser beam through MgO:PPSLT. Under optimized conditions, we obtained 11.1 W of green laser output at 532 nm for an incident signal power of 25.0 W at 1064 nm, corresponding to a conversion efficiency of 44.4%. The detailed investigation to find the optimized operating conditions and prospects for further improvement are discussed.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1240-1246
• /
• 2006

Generally, there are two types of main factors to affect output power quality of a auxiliary power supply an EMU(electric multiple unit). One is a voltage flicker by amplitude modulation of short time and air compressors. The other is repetitive motion of large capacity motor such as air compressors, HVAC unit etc. in main factors. This paper compared two kinds of fluorescent lamp, 32W (after remodeling interior) and 40W(before remodeling interior) and measured the light output varying input power(AC220V) for a flicker phenomenon related power supply of lamps in EMU. Also, we analyzed a flicker considering EMU operating time and density in order to grasp main factors of a load change to cause a voltage change. As a results of test, a 40W fluorescent lamp was more insensitive with 20.26% degree an eye recognition degree sides about changes of the input power and lower with 19.9% voltage side generating flicker compare with fluorescent lamp 32W. Also, we confirmed the fact which the fluorescent lamp flicker was generated by varying fluorescent lamp output voltage when the commercial EMU was in high driving density and at the busy time. Additionally, we confirmed the frequency band which an EMU passenger could feel sensitively blinking of a fluorescent lamp was visually $8Hz{\sim}15Hz$.