• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.201-206
• /
• 2015

A new electronically stopband tunable filter is proposed with three-input single-output using Operational Transconductance Amplifier (OTA) in this paper. The proposed filter provides band pass, low pass and high pass multifunctional responses. Centre frequency ($f_c$) and quality factor (Q) of the realized filters could independently tuned without disturbing each other. Various network sensitivity and non-ideal characteristic analysis are done to check the sensitivity and parasitic effect of different circuit parameters. The CMOS realization of filter is done with 1.8V-0.18um process parameters and HSPICE simulation results are presented to assert the presented theory.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.525-537
• /
• 2016

In this paper, we develop an online video mash-up system which use automatic scene elements composition scheme using a storyboard. There are two conventional online video production schemes. Video collage method is simple and easy, but it was difficult to reflect narrative or story. Another way is a template based method which usually select a template and it replaces resources such as photos or videos in the template. However, if the related templates do not exist, there are limitations that cannot create the desired output. In addition, the quality and atmosphere of the output is too dependent on the template. To solve these problems, we propose a video mash-up scheme using storyboard and we also implement a classification and recommendation scheme based on topic modeling.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.295-302
• /
• 2011

In this paper we consider technological requirements to broadcast digital television signals using single frequency networks(SFN) in the Advanced Television Systems Committee(ATSC) transmission systems and propose Interference Cancellation Digital On Channel Regenerative Repeater(IC-DOCR) thar overcomes the limitation of EDOCR(Equalization Digital On Channel Repeater) proposed by ETRI. The proposed IC-DOCR maintains the benefits of EDOCR that have good output signal quality removing multi-path, additive white Gaussian noise(AWGN). In additional, since the Interference Cancellation algorithm using the 8-VSB symbol demodulation of received signal removes the Interference of feedback signal, IC-DOCR improve the weakness of EDOCR that have low isolation between receive and transmit antenna so that can overcome the limitation of output signal power. we did analysis and verification of the proposed system performance using computational simulation.

• Journal of the Korean Magnetics Society
• /
• v.12 no.3
• /
• pp.109-116
• /
• 2002

We designed the flyback planar transformer, which had 8 W capacity, with 70 V input voltage and 8.2 V output voltage for the establishment of design method and the confirmation of application possibility. The numerical value of inductance measured under the switching frequency of 120 kHz was 1650 $\mu$H, which was the inductance efficiency of'85∼87% against theoretical value. The A.C. resistance of primary and secondary coil was 4.2 Ω and 0.25 Ω respectively, On the other hand, the quality factor for each wound numbers showed quite a high value of 158 and 75 respectively. And the Coupling Factor was 0.96∼0.97 under 120 kHz switching frequency. The inductance rapidly increased as the thickness of the core plane increased until it became 1.4 mm but under the thickness more than 1.4 mm, there was no substantial change. Therefore, the critical value of the plane thickness of core was 1.4 mm. And the shape of the output wave of the planar transformer at 70V input voltage was a stable square wave.

• Journal of Broadcast Engineering
• /
• v.13 no.3
• /
• pp.365-379
• /
• 2008

In this paper we consider technological requirements of the on-channel repeater to broadcast the terrestrial digital multimedia broadcasting (T-DMB) signals using single frequency networks (SFN) and propose the configuration and implementation method of the equalization on-channel repeater (OCR) that meet such requirements. The proposed equalization OCR not only has short time delay, but shows high output power and good quality of output signal by removing a feedback signal due to incomplete antenna isolation and multipath signal existing between the main transmitter and the OCR. In addition, computer simulations and laboratory tests results are provided to figure out performance of the proposed equalization OCR.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.1
• /
• pp.44-52
• /
• 2007

This study reviewed the overall process of application of contaminant fate and transport model as part of risk assessment. Site characterization and establishment of a conceptual model prior to establishing or selecting a appropriate model were described. Types of models, model selection guidance, and generic site conditions for model application were presented, the process of model calibration, validation, and sensitivity analysis were reviewed. Objectives of modeling should be defined before model selection, and the complexity of selected models should balance the quantity and quality of available input data with the desired model output. If model output is highly sensitive to an assumed or default value of input parameter, or fate and transport models cannot be adequately calibrated or validated, consideration should be given to other options such as using measured data or using another model.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.1024-1030
• /
• 2010

The focus of the study was to maximize the output data for Korean cuisine. This study evaluated the nutritional retention factor for different cuts of Korean beef (Hanwoo beef) subjected to various cooking methods. Five cuts (short rib, sirloin, chuck roll, tenderloin, and fore shank) of Korean Hanwoo beef were prepared and used in this experiment. Two different cooking methods (dry-heat cooking and moisture-heat cooking) were applied to each cut. The sodium contents of dry-heat cooked short rib (86.44), sirloin (76.81), tenderloin (86.65), and fore shank (85.89) decreased. Potassium contents of dryheat cooked sirloin (94.99), chuck roll (89.19), and fore shank (92.66) decreased. Calcium contents of dry-heat cooked sirloin (61.49), chuck roll (73.97), and fore shank (91.46) decreased. Iron contents of dry-heat cooked chuck roll (79.71), and tenderloin (90.79) decreased. Phosphorus contents of dry-heat cooked sirloin (87.87), and tenderloin (99.88) decreased. Mineral contents of all cuts cooked by moisture-heat decreased. Finally, the nutritional retention factor represents output data of each cooking method with yield % of each item.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.147-147
• /
• 2011

High crystalline nonpolar a-plane (11-20) nitride light emitting diodes (LEDs) have been fabricated on r-plane (1-102) sapphire substrates by metalorganic chemical-vapor deposition (MOCVD). The multi-quantum wells (MQWs) active region is consists of 4 periods the nonpolar a-plane InGaN/GaN(a-InGaN/GaN) on a high quality a-plane GaN (a-GaN) template grown by using the multibuffer layer technique. The full widths at half maximum (FWHMs) of x-ray rocking curve (XRC) obtained from phiscan of the specimen that was grown up to nonpolar a-plane GaN LED layers with double crystal x-ray diffraction. The FWHM values were decreased down to 477 arc sec for $0^{\circ}$ and 505 arc sec for $-90^{\circ}$, respectively. After fabricating a conventional lateral LED chip which size was $300{\times}600{\mu}m^2$, we measured the optical output power by on-wafer measurements. N-electrode was made with Cr/Au contact, and ITO on p-GaN was formed with Ohmic contact using Ni/Au followed by inductively coupled plasma etching for mesa isolation. The optical output power of 1.08 mW was obtained at drive current of 20 mA with the peak emission wavelength of 502 nm.

• Journal of Korea Water Resources Association
• /
• v.30 no.4
• /
• pp.367-377
• /
• 1997

In order to set public policy to overcome 'water crises' on both quantity and quality of water, we looked into the national-economic role of Korea water utility by two approaches. First, we examined the relationship between water consumption and economic growth during 1978-94, a period of rapid increase in water consumption caused by prompt industrialization and urbanization. The price and income elasticities of aggregate and sectoral demand for water were estimated. Second, we developed a static input-output(I-O) framework for analysing water issues in the short run. In addition, we discussed two topics in its application: i) sectoral failure(shortage) costs by supply-driven I-O model, ii) Leontief price model's sectoral pervasive effects of price due to rise in water rate. In conclusion, we found that investments to water sector and water shortage has a big influence on the standard of living and industrial production. Also we found that raising water rate to encourage conservation or to create investment funds decreases demand for water significantly but has a small influence on overall price levels.

• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.32-39
• /
• 2011

The output image of the uncooled thermal infrared camera is difficult the identification of target because of the limited dynamic range and the various noises. Retinex algorithm based on the theory of the human visual perception is known to be effective contrast enhancement technique. However, the image quality is insufficient when it is adopted to the narrow dynamic range image as the infrared image. In this paper, we propose the revised retinex algorithm to enhance the contrast of the infrared image. To improve the contrast enhancement performance, we designed the new dynamic range compression function instead of log function. To reduce the noise and compensate the loss of edge, we added the contrast compensation procedure in the MSR image generation process. According to the output picture comparing and numerical analysis, the proposed algorithm shows the better contrast enhancement performance and the more suitable method for the infrared image enhancement.