• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.377-378
• /
• 2007

In this paper, we were confirmed the optical characteristics of LED module by changing ambient temperature and driving current. When we supplied same driving current, the brightness quality drops due to an increased ambient temperature. The difference of brightness properties came out more large according to an increased driving current. Moreover, peak wavelength become shifted by long wavelength and declined output power by increasing driving current.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.423-426
• /
• 2000

The 3-D $31.5$\times$31.5$\times$2.5mm$^3$model of contour vibration mode piezoelectric transformer with Pb($Ni_{1/2}$$W_{1/2}$)$O_3$-Pb(Zr,Ti)$O_3$ ceramics was simulated by ANSYS according to the dot size 17, 18, 19, 20, 21 $mm\phi$ and analyzed the results. The mechanical quality factor of the 3-D model was decreased with the dot size and increased as 2605 at 20 $mm\phi$ and after then decreased again. The output voltage of that sample was 74123 [V] and the maximum stress of the dot electrode at that sample was 288[$10^7$N/$m^2$] and the maximum displacement of the ring electrode at that sample was 128 [$\mu\textrm{m}$].

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1784-1787
• /
• 2005

This paper presents the development and testing of a power conditioning system(PCS) for application to a 100kW Molten Carbonate Fuel Cell(MCFC) generation system. The MCFC generation system is a part of a four year government funded research project that began in 2001. This paper presents the results of various tests and performance verification of the 100kW PCS using a DC power system that simulates the DC output of the MCFC fuel cell. Performance of the DC/DC, DC/AC converters were verified, and basic control functions such as grid connection, protection and characteristics of each components were tested. The tests were performed under light load and rated load conditions to verify the operation efficiency, power quality effects, and stability of the PCS.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.693-696
• /
• 2003

Among many servo control systems in steel making plant, AGC system in hot rolling mill is very important to get a accurate strip thickness for good quality. AGC (Auto Gauge Control) system controls the roll gap to maintain the required thickness by using the variation of roll force and the measure of output thickness. In this paper, a simulator of AGC system which unifies both hydraulic servo control system and AGC algorithm is suggested. After proving the concurrence of algorithms between the simulator and real system, main actuator system is added. Instead of usual PI system used in present system, DOB control scheme is applied and shows the effect of disturbance attenuation well.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.3
• /
• pp.69-81
• /
• 1997

Up to now 5 Voith Sulzer paper machines with multi-layer headbox and Gapfor-mer are sucessfully running on papckaging papers. Linerboard, testliner and corugating medium is produced in the basis weight range from 105 to 275 $g/m^2$ at machine speeds up to 900 m/min. The nest one, starting up in Oct. ｀96 in Germany, will be the world＇s fastest paper machine for packaging papers. The 5.6 m wide machine is designed for a maximum operating speed of 1200 m/min. Approx. 220.000 tons of corrugating medium and testliner based on 100% waste paper in the basis weight range from 90 to 160 $g/m^2$ will be produced each year. An expansion stage planned for the future is intended to increase annual output to 280.000 tons. This machine will not only be the fastest one for packaging papers, it also comprises all described innovative key components which are available today in order to fulfill growing demands of the future with regard to quality and productivity. The concept of this advanced machine is shown in Fig. 9.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.565-566
• /
• 2003

The clinical performance of light polymerized composite resins is greatly influenced by the quality of the light curing unit used. Commonly used halogen light curing units(LCUs) have some specific drawbacks such as decreasing light output with time. To overcome this, the blue LED LCUs are newly developed and introduced. The purpose of this study was to observe the reaction kinetics and the degree of polymerization of composite resins when cured by different light sources and to evaluate the effectiveness of the blue LED LCUs compared with conventional halogen LCUs.(omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.37.1-37
• /
• 2001

Electric plating is used in various industry field. Specially, pulse plating is able to deposit material at high current density compared to conventional DC plating. For example, pulse plating can get more fine grain, can improve adhesion and metal distribution and current efficiency, can reduce internal stress and crack. Therefore, we developed bidirection pulse power supply(BPPS) which has high speed pulse current and high current density and improve deposition quality and increase plating speed in this paper. BPPS(Bidirection pulse power supply) needs high speed rising time, falling time and output current accuracy. BPPS consists of rectifier part, chopper part, invertor part, and control part. Rectifier part changes outprt current direction.

• International Journal of Reliability and Applications
• /
• v.2 no.1
• /
• pp.57-71
• /
• 2001

Global competition to increase production output and to improve quality is spurring manufacturing companies to use condition monitoring and fault diagnostic systems for predictive maintenance. As monitoring, testing, and measuring techniques develop, predictive control of components and complete systems have become more practical and affordable. In this article, we will consider the computer based data acquisition system for condition monitoring and the condition parameter analysis techniques for fault detection and diagnostics in the machinery and briefly discuss reliability prediction and the limit value determination in condition monitoring.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.599-610
• /
• 2008

It is an important and urgent issue to improve process capability in quality control. Process capability refers to the uniformity of the process. The variability in the process is a measure of the uniformity of output. A simple, quantitative way to express process capability, the degree of variability from target in specification is defined by process capability index(PCI). Almost process capability indices are defined under normal distribution. However, these indices can not be applied to the process of non-normal distribution including reliability. We investigate current research on the process of non-normal distribution, and advanced method and technology for developing more reliable and efficient PCI. Finally we suggest the perspective for future study.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.259-266
• /
• 1999

A study on the static type train simulator will include the training of new drives requires that the environment of the cab, controls placement, etc. must highly realistic so that driver can readily transfer his training experience to the real world. The simulator computer sends video disc speed command to a Video PC processor. A video switcher select the output of the on-line player. This selection is done with loss of vertical synchronization, meaning the picture will not noticeable roll or jump as the simulation mover from disc to disc. The video image quality remain contestant through the simulated speed range from zero to 100km/h. Flicker is avoided in the scene by the use of a TBC(Time Base Corrector) which causes the display of one video field at a time. Thus, no interfield jitter is present when the scene is stopped.