• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.355-356
• /
• 2015

This paper proposes a control strategy of total output power ripple cancellation for both of Machine-Side Converter (MSC) and Grid-Side Converter (GSC) in a DFIG under unbalanced grid conditions. The proposed control strategy for the MSC is the zero torque ripple control algorithm with an enhanced LVRT capability. The control algorithm for the MSC exhibits reduced torque pulsation in steady-state unbalanced grid conditions. In addition, this control algorithm also minimizes a peak value of rotor current in transient unbalanced grid conditions. The total output power ripple cancellation control algorithm is adopted in the GSC. The total output power ripple cancellation is achieved by nullifying the oscillating component of the total output active and reactive power at the summing point of stator and rotor of DFIG. The proposed control strategy for the GSC reduces the output power oscillation leading to the improved quality of wind farms output.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.11
• /
• pp.1195-1202
• /
• 2004

The international competition in refrigerator markets has continuously required the research for sound quality of a refrigerator to improve the quality of a life. In this paper, A new method for evaluation of the sound quality of a refrigerator is developed based on human sensibility engineering by using ANN(artificial neural network). In this paper, the loudness and the sharpness of the refrigerator's signals was used for the input value in ANN's training process because the loudness and the sharpness has a good correlation between the output of the ANN and the target of the individual evaluation In the training process. Two input factor was used repeatedly in the training process to get more optimum weighting value. And then finally we developed the sound quality index of a refrigerator. The developed sound quality index was confirmed by the 96.5 % of correlation between the output of the ANN and the real evaluation. It will be applied to evaluate the sound quality of a refrigerator in the industry.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.5
• /
• pp.238-245
• /
• 2003

In this paper, a single Phase voltage source voltage-controlled active power filter(APF) for power quality improvement was proposed. The proposed APF has the performance of harmonic suppression and unity power factor correction. The performance of harmonic suppression can be obtained by controlling the waveshape of the APF output voltage to be sine wave. And, unity power factor is controlled by the reactive power control loop of the APF output. Simulation and experimental results using diode rectifier showed that the voltage-controlled APF, unlike the current-controlled APF, can reduce the voltage harmonics as well as current harmonics. Also the results showed that the input dover factor and power quality were greatly improved.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.665-672
• /
• 2023

This study focuses on investigating the impact of the spectral linewidth of a seed laser in a master-oscillator power amplifier (MOPA) configuration on stimulated Brillouin scattering and the beam quality of the output diffracted by a grating. To conduct the study, a distributed feedback (DFB) laser is modulated in a pseudorandom binary sequence (PRBS) and amplified by a two-stage Yb-doped fiber amplifier to achieve an output power of over 1 kW. The spectral linewidth of the seed laser is systematically varied from 1 to 12 GHz in the frequency domain by varying the PRBS modulation parameters. The experimental results reveal a tradeoff between suppressing stimulated Brillouin scattering and enhancing beam quality with increased spectral linewidth. Therefore, the study provides valuable insights into optimizing spectral beam combining to achieve high beam quality and scalable power upgrade in fiber lasers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.509-517
• /
• 2020

This study evaluated the importance of technical characteristics in manufacturing street furniture using 3D printing technology to suggest the direction of development of high priority 3D printing technology. The importance was analyzed by the QFD, quantified by scores and the priority of the items was summarized. As a result, the 'output size', 'shrinkage of material', and 'output angle' were derived as technical elements that should be prioritized in development and research. For verification, the design of atypical street furniture was made into a large 3D printed output and the development direction was suggested by applying the technical elements of priority during the manufacturing process. Street furniture should be designed based on functionality and stability, as well as economic efficiency, productivity, and aesthetics. Therefore, the 'output size' ensured stability by minimizing the division of parts, and the 'contractability of materials' satisfied the aesthetic and productivity by minimizing the error of form. Finally, the 'output angle' was verified by improving the quality of the output and selecting an angle with efficient and structural stability through various output angles.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.229-233
• /
• 2012

A small water phantom (dual-window phantom) was developed to improve the output measurement efficiency of medical linacs. This phantom is suitable for determining the quality index and output dose for high-energy photon beams. The phantom has two opposite windows and two independently rotating axes. The two axes measure the tissue phantom ratio (TPR) and the percentage depth dose (PDD) simply without requiring chamber movement by rotating the phantom around its axis. High-energy photon beams from a Co-60 irradiator and a medical linac were used to evaluate the phantom. The measured quality index is in good agreement with the reference values; the measured and reference values are within 0.2% of each other for the Co-60 gamma rays and within 1.4% for 6 and 10 MV X-rays. This phantom is more practical for routine output measurements, resulting in the prevention of potential human errors.

• Korean Journal of Social Welfare
• /
• v.49
• /
• pp.343-378
• /
• 2002

This study examines the organizational performance of human service organizations from the quality output perspective. Using the 2001 evaluation data about 89 community welfare centers in Seoul, this study attempts to identify the levels of the performance of human service organizations in Korea. This study also attempts to identify the factors that predict performance of human service organizations measured in terms of client satisfaction and experts' evaluation about the functioning of each center. Results are as follows: (1) when pooling 866 clients' satisfaction level into satisfaction score about each center, the average of client satisfaction about the centers is 3.42 at 4 points scale. (2) 41.6% of the community welfare centers is evaluated as "highly qualified" in its overall operation and functioning by the professional evaluation team, (3) the employee reward system(+), practice based on the program guideline manual(+), the portion of the government support grant in its budget(-), the overall employee salary level(-), the level of acquirement of program grants from external sources (-) are the predictors in explaining clients' satisfaction level, and (4) the level of professional expertise of the executive director(+), the level of professional supervision of middle managers(+), the employee reward system(+), the program need assessment(+), the level of client information system(+), the portion of government support grant(-), the overall employee salary level(-) are the predictors for "being highly qualified" in its overall operation and function of each center. Through the empirical analysis, this study provides valuable knowledge about organizational performance of community welfare centers from the quality output perspective. Finally, this study discusses implications for more effective and efficient organizational performance of community welfare centers in Korea.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.1
• /
• pp.62-69
• /
• 2021

This study aimed to verify the suitability of an air quality regulating service for wetland ecosystem service evaluation by investigating the effect of reducing particulate matter (PM) on vegetation in wetlands. We installed tunnel-type experimental plots at Yonghwasil Pond in the National Institute of Ecology and set up the input and output of PM by applying the natural vegetation of the relevant wetlands. We took measurements by replicating four different conditions four times each. The air quality regulating service in each experimental plot was measured based on PM10 concentration; further, the difference between the input and the output concentration of PM passing through the Phragmites australis community tunnel was measured using a light scattering method. For the Phragmites australis community in the outdoor conditions and bare land, the PM concentration was measured with the same specifications as tunnel-type experimental plots without setting up the input and output. For the tunnel-type experimental plots, PM10 concentration was significantly lower in the output than in the input. Furthermore, in the outdoor conditions, a comparison between the Phragmites australis community and bare land showed that the concentration was relatively low in the former than in the latter. This confirmed the PM reducing effect due to the blockage and absorption of PM depending on the growth of Phragmites australis. Based on the results of this study, we assessed the air quality regulating service in wetlands as an evaluation indicator.

• Journal of Korean Society for Quality Management
• /
• v.32 no.2
• /
• pp.201-211
• /
• 2004

Process adjustment is a complimentary tool to process monitoring in process control. Process adjustment directs on maintaining a process output close to a target value by manipulating another controllable variable, by which significant process improvement can be achieved. Therefore, this approach can be applied to the 'Improve' stage of Six Sigma strategy. Though the optimal control rule minimizes process variability in general, it may not properly function when special causes occur in underlying process, resulting in off-target bias and increased variability in the adjusted output process, possibly for long periods. In this paper, we consider a responsive feedback control system and the minimum mean square error control rule. The bias in the adjusted output process is investigated in a general framework, especially focussing on stationary underlying process and the special cause of level shift type. Illustrative examples are employed to illustrate the issues discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1371-1373
• /
• 2005

Recently, preparing the problems in connection with energy and environment, grid-connected power systems have been intensively researched in the world. In general, the output power of grid-connected inverter (GCI) contains noisy components of inverter switching frequency. Moreover, pre-existing grid voltage disturbances degrade the output power quality. The objective of this paper is to make a GCI output high quality power. A robust current control scheme using neural network is presented in thispaper. To show the feasibility of the proposed scheme, some simulation results are provided.