• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.8-15
• /
• 2019

Korea's R&D investment has significantly increased in recent years and the quantitative outputs such as number of papers and patents have also increased with the investment. However, the quality of R&D outputs has not been fully addressed. In particular, quality of technical performance, such as the quality of patents, has attracted little attention. In this paper, a Data Envelopment Analysis (DEA) method was used to construct models for efficiency analysis of R&D investment, focused on quality of technical performance. Indices were proposed to analyze the quantitative and qualitative efficiencies of R&D investment. In order to effectively analyze R&D efficiencies, the measurement units of the input and output variables were standardized. Based on cases of livestock quarantine R&D projects of Korea, the quantitative and qualitative efficiencies of national R&D projects were analyzed and factors that would influence R&D efficiencies were identified. This paper suggests that both quantitative and qualitative efficiencies should be considered when measuring R&D efficiency. Also, it is recommended to carefully consider the characteristics of R&D projects during project selection stage.

• Journal of Environmental Impact Assessment
• /
• v.13 no.4
• /
• pp.153-164
• /
• 2004

An integration study of time-variable small watershed and stream models (USEPA's SWMM and WASP5) was performed for impact assessment of urbanization on water environment. The study area, the Kyoungan Stream, the tributary of Paldang Lake, was divided into 111 subbasins, based on the topographic condition, land use, and drainage system. RUNOFF block of SWMM was applied to estimate runoff flow and quality. EXTRAN block computed daily and hourly flow according to simulated runoff flow, water supply, and drainage data. SWMM was connected to WASP5 by transforming output file of SWMM into input file of WASP5. The nonpoint source loads and flow data of SWMM were imported to WASP5. The stream was divided into 45 segments based on the watershed delineation. The study included three water quality parameters, BOD, TN, and TP. The validate models were used to examine the impact of urbanization on stream flow and water quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.1
• /
• pp.78-83
• /
• 2013

The excessive and indiscriminate use of chemical fertilizers in the past has brought serious soil and other environmental problems so alternatives over this agrochemical are being searched. Our study focuses on the effects of expanded rice hull inoculated with selected beneficial microorganisms on growth (through agronomic characters), yield and yield components, and grain quality indices of rice. Results showed that favorable effects of different expanded rice hull preparations were not readily apparent at vegetative stage and only treatments with supplemental chemical fertilizer application were comparable with the conventional practice. Expanded rice hull combined with 50% rate of chemical fertilizer exhibited a significantly higher yield (6,471 kg $ha^{-1}$) over conventional practice (5,719 kg $ha^{-1}$). Good milling quality indices were observed in treatments having 50% chemical fertilizers plus alternatives from expanded rice hull. Finally, we demonstrated that chemical fertilizer rate can potentially be reduced into 50% if combined with expanded rice hull, and show even better output than chemical fertilizer alone.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.04a
• /
• pp.456-460
• /
• 2006

많은 6시그마 혁신을 하는 기업 중에서 ISO9000 시리즈나 ISO/TS16949 인증을 받고 있다. 그럼에도 불구하고 6시그마 도입 초기부터 ISO/TS16949와 통합운영을 생각하고 추진하는 곳은 많지 않다. ISO/TS16949에서는 기업전반의 프로세스에 많은 중점을 두고 있다. 그 중에서도 APQP(Advanced Product Quality Planning)은 제품 초기에서부터 명확한 품질계획 업무 프로세스를 가지고 활동을 하라는 필수 프로세스를 요구하고 있다. 그러나 구체적인 Flow나 단계는 각 기업체의 특성에 맞기고 있다. 6시그마의 Lean DFSS는 이러한 제품개발 프로세스의 구체적인 전계단계를 제공하고 있다 여기에 APQP에서 요건으로 명시한 각 프로세스 단계마다 Input요소, Output요소, Target, 그 프로세스를 책임질 구성원, 핵심성공요인, 핵심성공지수, 단계마다의 FMEA(Failure Mode Effect Analysis) 분석을 대응하면 도입 초기에서부터 상호 유기적이면서 효과적인 System이 된다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.27 no.1
• /
• pp.56-74
• /
• 2023

In order to obtain practical and high-quality satellite images containing high-frequency components, a large aperture optical system is required, which has a limitation in that it greatly increases the payload weight. As an attempt to overcome the problem, many multi-aperture optical systems have been proposed, but in many cases, these optical systems do not include high-frequency components in all directions, and making such an high-quality image is an ill-posed problem. In this paper, we use deep learning to overcome the limitation. A deep learning model receives low-quality images as input, estimates the Point Spread Function, PSF, and combines them to output a single high-quality image. We model images obtained from three rectangular apertures arranged in a regular polygon shape. We also propose the Modulation Transfer Function Loss, MTF Loss, which can capture the high-frequency components of the images. We present qualitative and quantitative results obtained through experiments.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.3
• /
• pp.355-364
• /
• 2022

The effect of technological innovation on the high-quality development of the producer services industry depends on whether or not technical innovation efficiency plays a key role. This study looks at the impact of technological innovation and financial technology (fintech) on the development of high-quality producer services in Fujian Province from 2010 to 2019. The efficiency of technological innovation is measured using Data Envelopment Analysis (DEA) and the Malmquist productivity index. The mean overall innovation efficiency score is 0.639, meaning that Fujian accounts for 36.1% of resource utilization inefficiencies and that there are significant differences in technological innovation efficiency between cities. The findings show that high-quality producer services industries benefited from innovation efficiency, but that the influence of technological innovation efficiency is insignificant. This demonstrates that financial innovation has not been able to completely enhance the development level of the producer services industry. This may be due to the unreasonable output structure of technological innovation and the low industrial transformation rate of technological achievements. This study advocates that the R&D fund allocation structure be optimized. That technological innovation can improve the high-quality development of the producer services industry is a consensus within the academic community.

• Journal of the Korean Regional Science Association
• /
• v.39 no.4
• /
• pp.111-125
• /
• 2023

China's rapid economic growth and accelerated urbanization have significantly increased labor force mobility. The choice of city residence and long-term residence intentions of migrants will have significant consequences on both economic output and societal dynamics. This paper investigates the impact of air quality on the long-term residence intention of migrants. By matching an individual-level survey on willingness to stay in the long run and the city-level air quality, represented by PM2.5, we find that the willingness to stay in the long run increases with better air quality. This implies that public policy to maintain good air quality is crucial in keeping those who moved to the city.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.468-480
• /
• 2015

The FTA between South Korea and China has been concluded in 2014. This means that there is high possibility of the economic integration in Northeast Asia. China's rapid growth has led the global economy, and the Northeast Asia has been attracting attention as the main market. Although the South Korean government cannot help continuing the overseas market-oriented policies, South Korea's construction orders in the Northeast Asia are insignificant, and their profitability is still low. It is time for South Korean construction industry to promote qualitative growth instead of quantitative growth. South Korean construction industry have to focus more on quality management to produce high-quality construction output. In order to support South Korean construction industry, Korean government needs to provide more advanced national quality management system. Therefore, this study compares national quality management systems in South Korea, Japan, and China, and suggests the direction of the South Korean national quality management system reform. In addition, another objective of this study is to confirm the importance of an ISO9001 based quality management system as a basis of the economic integration in Northeast Asia.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.107-121
• /
• 2018

This study investigates the effects of the Kano model on the product quality and quality satisfaction on the FDM low cost 3D printer, which is used by consumer and makers. 3D printer product quality is analyzed in terms of functionality, usability, durability, reliability and safety based on the inherent quality of the product itself. This study were tested using Kano analysis to calculate the product detail characteristics and Timko coefficient to calculate the degree of satisfactory effects of the 3D printer. As a result, this study becomes product size, the output speed, durability against external impact as attractive quality and the safety part is regarded as One-dimensional quality. With the exception of surface resolution, the Timko customer satisfaction index was the same as the Kano model.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.29 no.1
• /
• pp.27-40
• /
• 2023

Purpose: The study aimed to examine the concept and attributes of the quality of clinical nursing education for new graduate nurses. Methods: This study adopted a hybrid model introduced by Schwartz-Barcott and Kim. In the theoretical stage, the meaning and attributes of the quality of clinical nursing education for new graduate nurses were determined by analyzing eight articles. In the fieldwork stage, data were collected using semi-structured interviews with five new graduate nurses and seven experienced nurses. The data were analyzed by qualitative content analysis methods developed by Elo and Kyngӓs. In the final analysis, a final result was arrived at comparing, contrasting, and integrating the attributes of the concepts derived in the theoretical and field-work stages. Results: The quality of clinical nursing education for new graduate nurses was identified as excellence or the standard of education for new graduate nurses that would support them in adapting to clinical settings and transitioning to professional nurses. The attributes of the quality of clinical nursing education were founded to possess three dimensions, six categories, and 18 attributes. The multidimensional attributes of the quality of clinical nursing education for new graduate nurses were confirmed as education resources, design, method, content, evaluation, interaction, and outcome under the three dimensions of input, process, and output. Conclusion: The concept and nature of the quality of clinical nursing education observed in this study can be utilized as a basis for the future development, evaluation, and improvement of clinical nursing education for new graduate nurses in healthcare organizations.