• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.22-29
• /
• 2009

In this paper, we developed the 200-Watts SSPA(Solid State Power Amplifier) for the X-band pulse compression solid state radar. The developed X-band SSPA is consists of 3-stage CSA(Corporate Structured Amplifier) modules in pre-amplifier stage, driver-amplifier stage and main-power amplifier stage. The main-power amplifier stage of SSPA designed by balanced type using GaN HEMT with enough power and gain to generate power more than 200-Watts in X-band. The developed SSPA has performance with more than total gain 59dB and output power 200-Watts in condition of frequency range 9.2-9.6GHz, pulse period 1msec, pulse width 100usec and duty cycle 10%. The developed SSPA in this paper can apply to high quality solid state radar system with pulse compression technique.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.745-751
• /
• 2018

This paper reports on the design of a multiband multiple-input and multiple-output(MIMO) antenna for long-term evolution(LTE) vehicular communication and includes an analysis of the throughput field test results that were acquired by mounting the antenna to a vehicle. The antenna used for the field test was designed as a planar structure and included multiple stubs to obtain multiband resonant characteristics operating in the LTE(0.8~0.9 GHz, 1.7~2.2 GHz), Wi-Fi(2.4~2.48 GHz), and wireless access in vehicular environments (WAVE)(5.8~5.9 GHz) frequency bands. For the field test, antenna prototypes were mounted on the dashboard and roof of a vehicle and connected to the experimental LTE modem. The data transfer rate(throughput), signal-to-interference-plus-noise ratio(SINR), and reference signal received quality(RSRQ) were measured and analyzed in various real-world radio wave environments. Based on these results, the relationship between the SINR and throughput according to the field intensity is confirmed.

• Structural Engineering and Mechanics
• /
• v.64 no.3
• /
• pp.347-352
• /
• 2017

The poor maintenance practice increases the possibility of system failure. Subsequently, the consequences of failure fall on the aspects of output, safety and healthy, environmental integrity, system quality, and customer satisfaction. Conditionbased maintenance is seen as a potential strategy to improve performance. Whereby, the key success factor of this maintenance strategy is identified as the system inspection. This study aims to investigate the association between system breakdown rate and frequency of inspection. A mixed method approach is implemented by distributing questionnaire and interviewing for data collection. Subsequently, descriptive analysis, correlation analysis and regression are adopted to analyse the collected data from 100 respondents and the results are validated with interview data of 10 interviewees. The research result establishes significant relationship between the system breakdown rate and the frequency of inspection. Additionally, the result of regression analysis confirms that the frequency of inspection is the significant predictor of system breakdown rate. Planning of accurate inspection frequency is crucial to secure the system performance. Hence, the research signifies the importance to carry out regular inspection towards the building systems and components. As a recommendation, the maintenance personnel should assess the risk criticality of the building systems. Then, continuously monitor the condition of critical building systems; regularly inspect the condition of non-critical building systems and randomly inspect all of them.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.131-136
• /
• 2005

In 3D animation rendering process, Although we can render the output as a movie file format, most productions use image sequences in their rendering pipelines. This Image Sequence rendering process is extremely important step in final compositing in movie industries. Although there are various type of making image rendering processes, TGA format is one of most widely used bitmap file formats using in industries. People may ask TGA format is most suitable for in any case. As we know 3D softwares have their own image formats. so we need to testify on this. In this paper, we are going to focus on Alias' 3D package software called MAYA which we will analyze of compressing image sequence, Image quality, supporting Alpha channels in compositing, and Z-depth Information. The purpose of this paper is providing to 3D Pipeline as a guideline about effective image sequence format.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5545-5550
• /
• 2014

Background: Human biological materials from cancer patients are linked directly with public health issues in medical science research as foundational resources so securing "human biological material" is truly important in bio-industry. However, because South Korea's national R and D project lacks a proper managing system for establishing a national standard for the outputs of certain processes, high-value added human biological material produced by the national R and D project could be lost or neglected. As a result, it is necessary to develop a managing process, which can be started by establishing operating guidelines to handle the output of human biological materials. Materials and Methods: The current law and regulations related to submitting research outcome resources was reviewed, and the process of data 'acquisition' and data 'distribution' from the point of view of big data and health 2.0 was examined in order to arrive at a method for switching paradigms to better utilize human biological materials. Results: For the deposit of biological research resources, the original process was modified and a standard process with relative forms was developed. With deposit forms, research information, researchers, and deposit type are submitted. The checklist's 26 items are provided for publishing. This is a checklist of items that should be addressed in deposit reports. Lastly, XML-based deposit procedure forms were designed and developed to collect data in a structured form, to help researchers distribute their data in an electronic way. Conclusions: Through guidelines included with the plan for profit sharing between depositor and user it is possible to manage the material effectively and safely, so high-quality human biological material can be supplied and utilized by researchers from universities, industry and institutes. Furthermore, this will improve national competitiveness by leading to development in the national bio-science industry.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1773-1779
• /
• 2015

Shore-to-sea visible light communication using color clustered multiple-input and multiple-output (MIMO) is presented. The proposed maritime visible light communication (MVLC) offers a low-cost, high-speed wireless link for shore-to-sea maritime communications. Each color cluster is comprised of 50 red, green and blue (RGB) light emitting diodes (LEDs) and is modulated using on-off-keying (OOK). Selection combining is performed at the receiver, producing diversity effect within that color cluster. In this paper, we employ sea states (wave height, wind speed, etc.) data from both Pierson-Moskowitz and JONSWAP spectrum models under atmospheric turbulence conditions. Based on the simulation model, the maritime link quality is analysed in terms of coverage distance and bit error rate performance. The results show that the proposed system provides an efficient MVLC, while satisfying International Association of Lighthouse Authorities (IALA) requirements for maritime buoyage system and also offering sufficient illumination from high power LEDs.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.490-500
• /
• 2011

The channels of domestic FM broadcast are needed to provide various kinds of new broadcasting services. However, available channels are limited and saturated. The channel interval of FM broadcast is changed from 200 kHz to 100 kHz to maximize utilization efficiency of scarce broadcast spectrum at all over the world. Also, there are many researches such as IBOC(In Band On Channel) and DRM+(Digital Radio Mondial+) that is to allocate the digital signal beside analog bandwidth. But output power is decrease to avoid interference between adjacent radio stations. In this paper, we analyzes the problems of the protection ratio which is decided in 1986 and we propose method to improve about 7~10dB significantly the protection ratio according to the recent DSP(Digital Signal Processing) techniques without loss of both transmission power and broadcast quality. In addition, we examined the possibility of securing two times available channels by reducing minimum frequency interval from 800 kHz to 400 kHz or 600 kHz in the equal site.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.365-374
• /
• 1998

The SHE(Selected Harmonic Elimination) PWM scheme which eliminates specific lower order harmonics can generate h high quality output waveforms in 3-level PWM inverters. However. its application has limited since SHE switching a angles cannot be calculated on-line by a microprocessor-implemented control system. Based on off-line optimization. in which multiple SHE solutions were found and analysed for 2 to 5 switching angles per quarter in the 3-level SHE PWM pattern. this paper presents an algebraic algorithm for an ordinary microprocessor to calculate approximate SHE S switching angles on-line with such high resolution that it makes no practical difference between the accurate and the a approximate SHE switching angles. By employing the variable of the dc-link voltage Vdc' the proposed SHE PWM p pattern can ideally compensate the dc input fluctuation together with selected harmonics eliminated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.64-71
• /
• 2003

In this paper, we proposed an algorithm that shorten coding time maintaining image quality in JPEG2000, which is the standard, of still image compression. This method encodes only the bit plane selected as appropriate truncation point for output bitstream, obtained from estimation of frequency distribution for whole image. Wavelet characterized by multi-resolution has vertical, horizontal, and diagonal frequency components for each resolution. The frequency interrelation addressed above is maintained thorough whole level of resolution and represents the unique frequency characteristics for input image. Thus, using the frequency relation at highest level, we can pick the truncation point for the compression time decrease by estimating code bits at encoding each code block. Also, we reduced the encoding time using simply down sampling instead of low-pass filtering at low-levels which are not encoded in color component of lower energy than luminance component. From the proposed algorithm, we can reduce about 15~36% of encoding time maintaining PSNR 30$\pm$0.5㏈.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.5
• /
• pp.455-462
• /
• 2016

Output Characteristics of the spaceborn image sensor such as infrared(IR) sensor are varied according to time elapses and sensor repetition on/off operation. As a result, the quality of IR sensor image is decreased. Therefore, spaceborne image sensor require a periodic calibration using a black body system by correcting a non-uniformity of the sensor. In this paper, we proposed a MEMS-based black body system that can implement the high temperature uniformity at various standard temperatures ranging from low to high temperature and easily estimate the representative surface temperature. In addition, it has advantages lightweight, low-power and high accuracy. The feasibility of the proposed MEMS-based black body system was verified through the thermal analysis.