• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.149-152
• /
• 2011

Multi-Vision의 경우 전체 제품의 화질이 동일하게 설정이 되어야 하므로 설치 시에 각 제품의 화면 조정이 필요 하다. 이러한 이유로 제품 별 개별 제어가 필요 하다. 본문에서는 리모컨을 가지고 각각의 제품을 개별적으로 제어를 위한 방식을 제안하며 이를 위해서는 UI상에 Set ID 와 Picture ID구현이 필요 하고 리모컨 Code(IR 신호)의 In/Out의 연결을 위해 Cable을 통한 Daisy chain이 필요 하다. 각 제품들에 Set ID를 할당 한 후 변경하고자 하는 제품의 Picture ID를 Set ID와 동일하게 설정하면 ID가 동일한 제품에 한하여 Scaler에서 리모컨 Code(IR 신호)를 Decoding을 하도록 System을 구현하므로 제품 별 개별 제어가 가능 하게 된다.

• 유통과학연구
• /
• 제18권8호
• /
• pp.113-125
• /
• 2020

Purpose: The purpose of this paper is to investigate the effect of interaction between product category (fresh vs. indulgent product) and shopping options (shipping charge and delivery time) on customer satisfaction and purchase intent in an e-commerce context. When ordering groceries online, consumers begin to allocate a larger share of their grocery budget toward product categories that generally contain healthier items at the expense of product categories that generally contain more indulgent products. Moreover, customers are extremely sensitive to shipping options such as shipping charges and delivery time. Therefore, this research investigates the issue at a more segmented level to focus on the impact that one dimension of logistics service quality - product category, shipping charge, and delivery time have on customer satisfaction and purchase intent. Research design, data, and methodology: To test the theoretically derived priori hypotheses concerning product category, shipping charges, delivery time, satisfaction, and purchase intent, this research presented a scenario-based experiment. Eight treatment groups were assigned by the method of product category (fresh produce vs. indulgent product), shipping charge (free vs. paid), and delivery time (one-day vs. two to three days). A total of 240 subjects were divided into groups and exposed to one of the eight scenarios. Participant's purchase intention was the dependent variable, and ANOVA and L-matrix were used to analyze for main and interactive effects between factors. Conclusions: Results indicated that in tests 1 and 2, free shipping and fast delivery time increased consumer satisfaction as well as purchase intent, and fast delivery moderated the impact of free shipping on consumer satisfaction and purchase intent. Test 3 showed that the effect of free shipping on consumer satisfaction and purchase intent moderated by fast delivery for indulgent products. In contrast, fast delivery for fresh products moderated the effect of paid shipping on consumer satisfaction and purchase intent. Consistent with this proposed mechanism, the relative importance of fresh produce versus indulgent products highlights the effect of shipping options on consumer satisfaction and purchase intent when ordering the target product in an e-commerce context. We conclude with a discussion of the theoretical and practical implications of our findings.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2005년도 제36차 추계 학술발표대회
• /
• pp.71-84
• /
• 2005

In recent year, animal welfare is more and more attracted public concern. Many countries have legislated animal welfare laws especially in EU. Now, it is appearing as an international issue in livestock product trade area because of animal welfare standard differences. The concept of animal welfare is not scientific but Ideological. In relation to consumer quality, animal welfare was defined confidential quality attribute. Therefore it is hard to approach to technical quality characteristic. This article reviewed interrelationships of animal welfare and product quality included in animal welfare as a quality factor, the mechanisms of determined quality influenced by animal welfare, relations of the type of animal welfare and quality profiles, and global perspectives.

• 한국CDE학회논문집
• /
• 제8권3호
• /
• pp.157-166
• /
• 2003

In this paper, we explain the DMU (digital mockup) system based on the PDM system. Most manufacturing companies are trying to develop a competitive product by increasing the quality, shortening time to market (TIM) and reducing the cost of a product. Some technologies such as SE (System Engineering), CE (Concurrent Engineering), QFD (Quality Function Development), CI (Cost Innovation) and some systems such as CAD (Computer-Aided Design), CAE (Computer-Aided Engineering), CAM (Computer-Aided Manufacturing), PDM (Product Data Management) and visualization system are adopted for these purposes. Specially, DMU system utilizes a visualization system that shows the 3D shape of a product on the computer and it gives a quick intuition to a person whether he/she is an engineer or not. It also can induce the effects of CE and QFD. SO, 0 company is developing a DMU system integrating CAD, visualization and PDM system. The main feature of the developed DMU system is that it is entirely integrated with PDM system, which means that the 3D shape of any part or assembly can be retrieved through PDM system. The DMU system will change the development process, which will increase the competitiveness of a developed product.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.102-108
• /
• 1993

The purpose of burn-in is to eliminate the early failures of the products before they are delivered for customer use. Therefore burn-in should he continued until one is reasonally sure that all the weak items have failed, thus leaving the remaining items in a healthy state of reliability. From this point of view, burn-in time dependent costs such as a cost per product per burn-in time, and cost of repair of the product per failure occurred during burn-in time will he increased. Conversely, the cost of field repair of the product per failure occurred during the guarantee period will be decreased since the early failure of the product is fully eliminated during burn-in. Hence, this paper intend to determine optimal burn-in time which minimize the total of above costs associated with burn-in.

• 유통과학연구
• /
• 제10권10호
• /
• pp.35-43
• /
• 2012

Purpose - The current analysis has been done in order to verify the difference between consumer attitudes on the distributor's PB products in terms of practical shopping value and attitudes about the product according to its perceived quality. Research design, data, and methodology - The target respondents of this study were those who have bought PB products at large-scale discount stores within the past six months. We asked homemakers, office workers, and students who live in Seoul or Daejon to respond to a questionnaire by filling out self-evaluations, and collected the completed questionnaires. To test the hypothesis, a t-test was carried out by group for 25 percent of the high and low rankings, including a quarter of the total respondents, to verify attitudes toward products and brands, purchase satisfaction, and re-purchase intention according to the practical shopping value and recognized quality of PB products. A variance analysis was conducted to see if there were differences among groups in terms of practical shopping value and perceived quality. Scheffe's back testing was used to identify differences between groups. Results - The result of the investigation of consumer attitudes according to practical shopping value is as follows. First, it was verified that consumer attitudes about PB products increase as practical shopping value increases. Second, there was no significant. Third, it was verified that repurchase intentions for PB products get higher as the practical shopping value of the consumer increases. The following is the result of the investigation of consumer attitudes according to the perceived quality of PB products. First, it was verified that the product attitude improves as the perceived quality of PB products increases. Second, the research confirmed that the brand attitude improves as the perceived quality of PB products increases. Third, consumer satisfaction is higher when the perceived quality of PB products is high. Fourth, this study verified that repurchase intentions for PB products are higher as the perceived quality of the product increases. Finally, the results of identifying differences between groups for perceived quality and shopping value are as follows. It was identified that there were differences in shopping value according to the characteristics of the groups. However, perceived quality does not change according to the characteristics of groups. Conclusions - These results have practical implications for the marketing strategy of PB products in order to satisfy consumer demands and provide a differentiated service by the distributor. In addition, it is suggested that a communication strategy may be necessary to increase brand loyalty and ensure the continual growth and value creation of PB products as symbolic products for distributors.

• 품질경영학회지
• /
• 제27권2호
• /
• pp.126-142
• /
• 1999

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Taguchi has an idea that mean and variation are handled simultaneously to reduce the expected loss in products and processes. Taguchi parameter design has a great deal of advantages but it also has some disadvantages. The various research efforts aimed at developing alternative methods. In the Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was suggested by Welch et. al. ( 1990) and studied by others. In these studies, only single quality characteristic was considered. In this paper we propose how to simultaneously optimize multiple quality characteristics using desirability function when we used the combined-array approach to assign control and noise factors. An example is illustrated to show the difference between the Taguchi's product-array approach and the combined-array approach.

• 경영정보학연구
• /
• 제7권2호
• /
• pp.117-128
• /
• 2005

본 연구는 철강제조 분야에서 제품 생산 중 발생하는 모든 데이터를 실시간으로 수집하여 데이터베이스화하고, 웹 기반 시스템을 구축함으로써 시간과 장소의 제약 없이 필요 데이터를 조회, 분석할 수 있는 시스템 개발에 대한 연구이다. 본 시스템의 구축 결과, 실시간으로 데이터의 조회 및 분석이 가능하게 됨으로써 생산 제품에 대한 보다 효율적인 품질개선 활동이 가능하게 되었고, 제품의 신뢰도를 높일 수 있게 되었다. 또한 장기간 누적된 데이터를 데이터베이스화하고 그것을 통계적으로 분석 가능하게 함으로써 새로운 제어모델의 개발과 조업기술의 개발이 보다 용이하게 되었고, 신제품 개발의 기초자료로도 활용할 수 있게 되었다.

• 산업공학
• /
• 제15권3호
• /
• pp.270-278
• /
• 2002

Product Liability(PL) is a legal policy to deal with global competition by improving domestic industrial competitive power and to reduce the cost of defect products. The purpose of this paper is to address the state of the art solutions to dispute on PL, in reality of a frequent occurrence of global product exchange focussing on product safety that is one of the most important functions of PL and to improve solution of the product safety and reliability responsive to PL. To minimize PL exposure, manufacturers should reflect comprehensive product safety and reliability concepts in establishing PL prevention policies. Total PL prevention policies are composed of total quality management and product safety management system in respect of safety design, risk, and reliability. These PL prevention activities should be performed consistently during the total product life cycle, especially product research and development periods.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.