• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.578-587
• /
• 2015

Nuclear SSR (nSSR) and chloroplast SSR (cpSSR) markers were analyzed to assess the parameters of mating system in seed orchard, such as outcrossing rates, the number of potential pollen contributors, paternal contribution rates, degree of pollen contamination, and biparental inbreeding ($t_m-t_s$). In 2006, 2007, seeds were collected from the seed orchard of Pinus densiflora, established in 1977 at Anmyeon island. Estimates of outcrossing rates ranged from 94.9 to 100% (mean 98.9%) in 2006 and from 91.2 to 100% (mean 97.7%) in 2007 on the basis of the analysis of cpSSR haplotypes and from 90.3 to 100% (mean 95.9%) in 2006 and from 81.6 to 100% (mean 95.3%) in 2007 on the basis of the analysis of nSSR genotypes. By cross checking of both DNA markers, mean cumulative outcrossing rates of 100% and 98.9% were estimated in each year. Mean contamination rates were estimated as 48.9% and 42.4%, respectively. On the basis of cpSSR haplotype observed in each seed, paternal contribution rates (the number of pollen contributors) were estimated as 0.458 (mean 16.2) in 2006 and 0.512 (mean 14.8) in 2007. In conclusion, considering pretty high level of outcrossing rates observed in a seed orchard, there might be little to be influenced by inbreeding depression for genetic potential of the seeds induced by selfing. Estimates of the mating system parameters obtained from the two reproductive years were not statistically different, which revealed stable genetic quality of seeds produced in different years. Observed results from this study may provide useful information for the management and establishment of the seed orchard of the progressive generation.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.137-172
• /
• 2008

The earliest safety data programs, the FDR and CVR, were electronic reporting systems that generate data "automatically." The FDR program, originally instituted in 1958, had no publicly available restrictions for protections against sanctions by the FAA or an airline, although there are agreements and union contracts forbidding the use of FDR data for FAA enforcement actions. This FDR program still has the least formalized protections. With the advent of the CVR program in 1966, the precursor to the current FAR 91.25 was already in place, having been promulgated in 1964. It stated that the FAA would not use CVR data for enforcement actions. In 1982, Congress began restricting the disclosure of the CVR tape and transcripts. Congress added further clarification of the availability of discovery in civil litigation in 1994. Thus, the CVR data have more definitive protections in place than do FDR data. The ASRS was the first non-automatic reporting system; and built into its original design in 1975 was a promise of limited protection from enforcement sanctions. That promise was further codified in an FAR in 1979. As with the CVR, from its inception, the ASRS had some protections built in for the person who might have had a safety problem. However, the program did not (and to this day does not) explicitly deal with issues of use by airlines, litigants, or the public media, although it appears that airlines will either take a non-punitive stance if an ASRS report is filed, or the airline may ignore the fact that it has been filed at all. The FAA worked with several U.S. airlines in the early 1990s on developing ASAP programs, and the FAA issued an Advisory Circular about the program in 1997. From its inception, the ASAP program contained some FAA enforcement protections and company discipline protections, although some protection against litigation disclosure and public disclosure was not added until 2003, when FAA Order 8000.82 was promulgated, placing the program under the protections of FAR 193, which had been added in 2001. The FOQA program, when it was first instituted through a demonstration program in 1995, did not contain protections against sanctions. Now, however, the FAA cannot take enforcement action based on FOQA safety data, and an airline is limited to "corrective action" under the program. Union contracts can exclude FOQA from the realm of disciplinary action, although airline practice may be for airlines to require retraining if there is no contract in place forbidding it. The data is protected against disclosure for litigation and public media purposes by FAA Order 8000.81, issued in 2003, which placed FOQA under the protections of FAR 193. The figure on the next page shows when each program began, and when each statute, regulation, or order became effective for that program.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.742-748
• /
• 2009

In the meat industry, correct breed information in food labeling is required to assure meat quality. Genetic markers provide corroborating evidence to identify breed. We described the development of DNA markers to discriminate between Korean beef cattle (Hanwoo), Holstein, and mixed cow beefs. As most breeds are standardized for coat colour, the melanocortin 1 receptor (MC1R) gene, involved in the regulation of eu/pheomelanins synthesis, has been suggested as marker for breed traceability of products of animal origin. We also designed sex-determining region Y (SRY) gene specific primers for Y chromosome detection. In this study, fragments of MC1R gene and SRY gene were amplified by multiplex-PCR and subjected to digestion by MspA1I restriction endonuclease. Reaction products were analysised by denaturing high performance liquid chromatography (DHPLC). As a result, we identified 6 DHPLC peak types from MC1R gene and SRY gene analysis. DHPLC method showed more sensitive than RFLP method for DNA fragments analysis. Therefore, DHPLC method can apply to identify for Hanwoo, Holstein and mixed beef.

• Korean Journal of Environment and Ecology
• /
• v.21 no.3
• /
• pp.223-234
• /
• 2007

The study, executed with Hallasan National Park, which deserves to be a typical ecotourism destination, aims to provide basic information on park management for early establishment of ecotourism in a national park by assessing its visitors' behavior and satisfaction with a nature trail established as a series of an environmental interpretation program. The questionnaire survey was conducted at Eorimok Square in the weekday and on the weekend for two months of August and September in 2006, and finally 144 valid samples were used for the analysis. As a result of the research, it revealed that the demographic characteristics of the visitors to Hallasan National Park tended to coincide with those of the visitors to other national parks In Korea. On the whole, it showed their low recognition level of nature trails built up in national parks and less experience in using them. However, the visitors' satisfaction level and intention of re-visit, and recommendation to others were comparatively higher after actually using the nature trail at the site of Hallasan National Park, which hints at the possibility of national parks' much weightier role as the ground for ecology education and the functional expansion of the environmental interpretation-related facilities and programs. As for the attributes having effects on users' satisfaction with a nature trail, substantial aspects such as accessibility, safety, uniqueness and interest in environmental interpretation, and educational quality as well as physical facility management were revealed to have equal effects on users' satisfaction level, so there still remain a lot of pending issues over the reality of national parks in the initial stage of ecotourism staying at the level of the introduction and establishment of the facilities for environmental interpretation. This research had surveyed visitors to Hallasan National Park and limited to the nature trail only. For more systematic and practical ecological management of a national park, the in-depth understanding of the attributes affecting satisfaction of ecotourists, including nature trails and other environmental interpretation programs, and more sophisticated measuring tools are needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.239-246
• /
• 2017

There are various transversal structures (small dams or drop structures) in median and small streams in Korea. Most of them are concrete structures and it is so hard to exclude low-level water. Unless drainage valves and/or gates would not be installed near bottom of bed, sediment from upstream should be deposited and also contaminants attached to the sediments would devastatingly threaten the water quality and ecosystem. One of countermeasures for such problem is the bypass pipe installed underneath the transversal structure. However, there is still issued whether it would be workable if the gravels and/or stones would roll into and be not excluded. Therefore, in this study, the conditions to exclude the rip stone which enter into the bypass pipe was reviewed. Based on sediment transport phenomenon, the behavior of stones was investigated with the concepts from the critical shear stress of sediment and d'Alembert principle. As final results, the basis condition (${\tau}_c{^*}$) was derived using the Lagrangian description since the stones are in the moving state, not in the stationary state. From hydraulic experiments the relative velocity could be obtained. In order to minimize the scale effect, the extra wide channel of 5.0 m wide and 1.0 m high was constructed and the experimental stones were fully spherical ones. Experimental results showed that the ratio of flow velocity to spherical particle velocity was measured between 0.5 and 0.7, and this result was substituted into the suggested equation to identify the critical condition wether the stones were excluded. Regimes about the exclusion of stone in bypass pipe were divided into three types according to particle Reynolds number ($Re_p$) and dimensionless critical shear force (${\tau}_c{^*}$) - exclusion section, probabilistic exclusion section, no exclusion section. Results from this study would be useful and essential information for bypass pipe design in transveral structures.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.202-209
• /
• 2004

Flat panel based digital radiography (DR) systems have recently become useful and important in the field of diagnostic radiology. For DRs with amorphous silicon photosensors, CsI(TI) is normally used as the scintillator, which produces visible light corresponding to the absorbed radiation energy. The visible light photons are converted into electric signal in the amorphous silicon photodiodes which constitute a two dimensional array. In order to produce good quality images, detailed behaviors of DR detectors to radiation must be studied. The relationship between air exposure and the DR outputs has been investigated in many studies. But this relationship was investigated under the condition of the fixed tube voltage. In this study, we investigated the relationship between the DR outputs and X-ray in terms of the absorbed energy in the detector rather than the air exposure using SPEC-l8, an X-ray energy spectrum model. Measured exposure was compared with calculated exposure for obtaining the inherent filtration that is a important input variable of SPEC-l8. The absorbed energy in the detector was calculated using algorithm of calculating the absorbed energy in the material and pixel values of real images under various conditions was obtained. The characteristic curve was obtained using the relationship of two parameter and the results were verified using phantoms made of water and aluminum. The pixel values of the phantom image were estimated and compared with the characteristic curve under various conditions. It was found that the relationship between the DR outputs and the absorbed energy in the detector was almost linear. In a experiment using the phantoms, the estimated pixel values agreed with the characteristic curve, although the effect of scattered photons introduced some errors. However, effect of a scattered X-ray must be studied because it was not included in the calculation algorithm. The result of this study can provide useful information about a pre-processing of digital radiography.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.298-303
• /
• 2014

In this study, we examine the trends and types of incidents frequently occur during radiation therapy by using the data from the radiation oncology safety information system (ROSIS), according to discovery method explores the development direction of future research accident cause factor control method. This study was carried out analysis of incident data in ROSIS nearly 1163 cases in last 11 years from 2003 to 2013. We categorized into treatment methods, found the time, discoverer of occupations and finding ways to analyze the data. Then, we calculate the percentage and the classification for each item. About 1163 cases of incident cases including the near miss cases, external radiation therapy, brachytherapy and other were 97%, 2% and 1%. In the case was improperly planned dose delivery was 44% (497 cases) which 429 cases (86%) was found before 3 fractions and 13 cases were found after 11 fractions. The investigation was found to be distributed in various a found times. Approximately 42% of found time was during treatment and 29% of patients were found the problem during inspection chart. Occupation to discover the most radiation accidents was the radiation therapist (53%) who works in treatment room. Among 1163 incidence cases, 24% cases were found the accident before the treatment, therefore most of accident were found after of during the treatment (70%, 813 cases). This trend is acquired through ROSIS analysis, is expected to be not significantly different in the case of Korea, so it is necessary more diverse and systematic research for the prevention and early detection by using the ROSIS data.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.111-126
• /
• 1998

In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA/sup (R)/ in male and female adults in their 20's on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop. and postop. root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied using panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows: 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the actual maxilla specimen were 2.83 mm, 4.51mm, and 4.l5mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5％ of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography. 3. In cross-sectional view, when the vertical relationship of the maxillary sinus floor and maxillary roots was assessed, in 1st molars, type II (the sinus floor that extends down to the buccolingual furcation area) was predominant, while in 2nd molars, type I (the sinus floor located above the level connecting the buccal and lingual apices) was predominant. In the horizontal relationship, in 1st molars, type II (the lowest floor of the maxillary sinus located in between the buccal and lingual roots) was predominant; in 2nd molars, type I (the lowest floor of the maxillary sinus located on the buccal side of the buccal roots) and type II appeared in similar frequency. In conclusion, the SCANORA/sup (R)/ cross-sectional tomography was more effective than the frequently used panoramic view, in that the relationship of the maxillary molars and maxillary sinus floor can be evaluated more accurately and the buccolingual cross-sectional view can also be observed. And maxillary sinus floor that was close to maxillary 2nd molar had tendency to be located on buccal side than that close to 1st molar. Therefore, cross-sectional tomography is an effective and accurate method to evaluate the position of the teeth in relation to the sinus floor preoperative and can be easily used to diagnose localized periapical lesions. Also, the image quality obtained was quite satisfactory.

• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.443-451
• /
• 2009

The purpose of this study was to examine the views of dental hygiene students about the possible countermeasure of domestic hospitals for the opening of the medical market. The subjects in this study were 269 dental hygiene sophomores, juniors and seniors at two different colleges in the region of Busan. The findings of the study were as follows: The opening of the medical market and views of possible countermove, whether they agreed to that or not made a statistically significant difference to their opinions on the necessity of customer-oriented marketing strategy(p=0.023), analysis of foreign medical markets/attempt to make inroads into the markets(p<0.000) and the improvement of the quality of medical services/the diversification of the services(p=0.025). As to an intention of going to a foreign hospital, they had a statistically significantly different intention about whether to go to a foreign hospital regardless of medical bills(p<0.000), whether to consult a doctor in a foreign hospital after going to a domestic hospital first (p<0.000), whether to consider the distance between their houses and a foreign hospital(p=0.05) and whether to take considerations on the assistance of an interpreter(p=0.023). In regard to preference for foreign hospitals, American hospitals ranked first(41.9), followed by Australian hospitals(19.9) and Canadian ones(14.2).