• The Transactions of the Korean Institute of Electrical Engineers C
• /
• 제53권2호
• /
• pp.67-72
• /
• 2004

The microwave dielectric properties and microstructure of the (1-x)$Mg_4Ta_2O_{9-x}TiO_2$(X=0, 0.3, 0.4) ceramic were, investigated. The specimens were prepared by the conventional mixed oxide method with sintering temperature of $1350^{\circ}C$∼$1425^{\circ}C$. According to the XRD patterns, the (1-x)$Mg_4Ta_2O_{9-x}TiO_2$(X=0, 0.3, 0.4) ceramics have the $Mg_4Ta_2O_{9}$ phase(hexagonal). The dielectric constant($\varepsilon$$_{\gamma}$) and density increased with sintering temperature and mole fraction of x. To improve the quality factor and the temperature coefficient of resonant frequency, TiO$_2$($\varepsilon_{r}$=100, $Q{\times}f_{r}$=40,000GHz, $\tau$$_{f}$=＋450 ppm/$^{\circ}C$) was added in $Mg_4Ta_2O_{9}$ ceramics. In the case of the $0.7Mg_4Ta_2O_{9}$-$0.3TiO_2$ and the $0.6Mg_4Ta_2O_{9}$-$0.4TiO_2$ceramics sintered at $1400^{\circ}C$ for 5hr., the microwave dielectric properties were $\varepsilon$$_{\gamma}$=11.72, $Q{\times}f_{r}$=126,419GHz, $\tau_{f}$=-31.82 ppm/$^{\circ}C$ and $\varepsilon_{r}$=12.19, $Q{\times}f_{r}$=109,411GHZ, $\tau$$_{f}$= -17.21 ppm/$^{\circ}C$, respectively.

• Current Optics and Photonics
• /
• 제6권5호
• /
• pp.497-505
• /
• 2022

Topological photonic nanocavities are considered to possess outstanding optical performance, and provide new platforms for realizing strong interaction between light and matter, due to their robustness to impurities and defects. Here hybrid plasmonic topological photonic nanocavities are proposed, by embedding various plasmon nanoantennas such as gold nanospheres, cylinders, and rectangles in a topological photonic crystal corner-state nanocavity. The maximum quality factor Q and minimum effective mode volume V_eff of these hybrid nanocavities can reach the order of 10⁴ and 10^-4 (𝜆/n)³ respectively, and the high figures of merit Q/V_eff for all of these hybrid nanocavites are stable and on the order of 10⁵ (𝜆/n)^-3. The relative positions of the plasmon nanoantennas will influence the coupling strength between the plasmon structures and the topological nanocavity. The hybrid nanocavity with gold nanospheres possesses much higher Q, but relatively large V_eff. The presence of a gold rectangular structure can confine more electromagnetic energy within a smaller space, since its V_eff is smallest, although Q is lowest among these structures. This work provides an outstanding platform for cavity quantum electrodynamics and has a wide range of applications in topological quantum light sources, such as single-photon sources and nanolasers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.143-148
• /
• 2001

PbWO$_4$ can be densified at 85$0^{\circ}C$ and it shows fairy good microwave dielectric properties; dielectric constant($\varepsilon$$_{r}$) of 21.5, quality factor(Q $\times$f$_{0}$) of 37,224 GHz, and temperature coefficient of resonant frequency($\tau$/suf f/) of -31ppm/$^{\circ}C$. Due to its low sintering temperature, PbWO$_4$ can be used as a multilayered chip component at microwave frequency with high electrical performance by using high conductive electrode metals such as Ag and Cu. However, in order to use this material for microwave communication devices, the $\tau$$_{f}$ of PbWO$_4$ must be stabilized to near zero with high Q$\times$f$_{0}$. In present study, PbWO$_4$ was modified by adding TiO$_2$, B$_2$O$_3$, and CuO in order to improve the microwave dielectric properties without increasing the sintering temperature. The addition of TiO$_2$ increased the $\tau$$_{f}$ and $\varepsilon$$_{r}$, due to its high rr(200ppm/$^{\circ}C$) and $\varepsilon$$_{r}$(100). However, the addition of TiO$_2$ reduced the Q$\times$f$_{0}$ value. When the mot ratio of PbWO$_4$ and TiO$_2$ was 0.913:7.087, near zero $\tau$$_{f}$(0.2ppm/$^{\circ}C$) was obtaibed with $\varepsilon$$_{r}$=22.3, and Q$\times$f/$_{0}$=21,443GHz. With this composition, various amount of B$_2$O$_3$ and CuO were added in order to improve the quality factor. The addition, of B$_2$O$_3$ decreased the $\varepsilon$$_{r}$. However, increased Q$\times$f$_{0}$ and $\tau$$_{f}$. When 2.5 wt% of B$_2$O$_3$ was added to the 0.913PbWO$_4$-0.087TiO$_2$ ceramic, $\tau$$_{f}$ =8.2, $\varepsilon$$_{r}$=20.3, Q$\times$f$_{0}$=54784 GHz. When CuO added to the 0.913PbWO$_4$-0.087TiO$_2$ ceramic, $\tau$$_{f}$ was continuously decreased. And $\varepsilon$$_{r}$ . and Q$\times$f$_{0}$ were increased up to 1.0 wt% then decreased. At 0.1 wt% of CuO addition, the 0.913PbWO$_4$-7.087Ti0$_2$ Ceramic Showed $\varepsilon$$_{r}$=23.5, $\tau$$_{f}$=4.4ppm/$^{\circ}C$, and Q$\times$f$_{0}$=32,932 GHz.> 0/=32,932 GHz.X>=32,932 GHz.> 0/=32,932 GHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.172-173
• /
• 2008

In this study, $0.95(K_{0.5}Na_{0.5})NbO_3$-0.05Li$(Sb_{0.8}Nb_{0.2})O_3$ + $Ag_2O$ + x wt% $MnO_2$ were investigated as a function of the amount of $MnO_2$ addition in order to improve dielectric and piezoelectric properties of Lead-free piezoelectric ceramics. With increasing the amount of $MnO_2$ addition, density and electromechanical coupling factor $(k_p)$ increased up to 0.3wt.% $MnO_2$ and decreased above 0.3wt.% $MnO_2$. At the sintering temperature of 1020 $^{\circ}C$, Electromechanical coupling factor $(k_p)$, density, dielectric constant $({\varepsilon}r)$ and mechanical quality factor $(Q_m)$ of composition ceramics with 0.4wt% $Ag_2O$ addition showed the optimal value of 0.431, 4.33 g/$cm^3$, 820 and 119, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제21권2호
• /
• pp.126-130
• /
• 2008

In this study, in order to develop low loss multilayer piezoelectric actuator, PZN-PZT ceramics were fabricated using $Li_2CO_3,\;Bi_2O_3$, CuO and ZnO as sintering aids, their structural, piezoelectric and dielectric characteristics were investigated according to the amount of ZnO addition, At the sintering temperature of $870^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}_r$) and piezoelectric constant($d_{33}$) of 0.4 wt% ZnO added specimen (sintered at $870^{\circ}C$) showed the optimum value of $7.812g/cm^3$, 0.535, 916, 1399, 335 pC/N respectively. Taking into consideration above piezoelectric properties of the specimen sintered at low temperature, it was concluded that PZN-PZT ceramics using 0.4 wt% ZnO as additive showed the optimum characteristics as the composition ceramics for low loss multilayer piezoelectric actuator application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제21권11호
• /
• pp.233-238
• /
• 2020

Although the interest in NBR has been increasing due to the recent developments of the aerospace sector, there are few reports on HNBR's aeronautical oil, particularly evaluations of the accelerated life of harsh factors. In this study, the tensile strength was adopted as a performance evaluation factor to evaluate the accelerated life of HNBR used in the aviation field. The accelerated stress factor affecting the performance-aging characteristics was defined as temperature. The acceleration stress factor was determined to be temperature, and the result of measuring the tensile strength change over time. The sample for the acceleration condition was taken out of the oven for a certain period and left at room temperature for 24 hours. The dumbbell type 3 specimens were manufactured according to the standard specified in KS M 6518 and were measured the tensile strength, a factor in accelerated life evaluations. The activation energy was 0.895, and the shape parameter was 1.152 using the Arrhenius model. The characteristic life obtained from the tensile strength of the HNBR specimen immersed in aviation oil at 20℃ was 272,256 hours; the average life was 258,965 hours, and the B10 life was 38,624 hours.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제18권3호
• /
• pp.243-247
• /
• 2005

In this study, in order to develop low temperature sintering ceramics for ultrasonic vibrator application, PNW-PMN-PZT system ceramics were manufactured according to the amount of CaCO$_3$ addition, and their piezoelectric, dielectric and microstructural characteristics were investigated. The ceramic specimens could be sintered at sintering temperature below 1000 $^{\circ}C$ due to the effect of Li$_2$CO$_3$-CaCO$_3$ liquid phase produced by the reaction of Li$_2$CO$_3$ and CaCO$_3$. At 0.2 wt% Li$_2$CO$_3$ and 0.25 wt％ CaCO$_3$ added specimen sintered at 920 $^{\circ}C$, the density, electromechanical coupling factor(k$_{p}$), mechanical quality factor(Q$_{m}$) and dielectric constant showed the optimal value of 7.78 g/㎤, 0.49, 1396, and 1300, respectively, for ultrasonic vibrator application.ion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제17권9호
• /
• pp.942-946
• /
• 2004

The crystalline and dielectric properties on Al$_2$O$_3$ filled glass frit (CaO-Al$_2$O$_3$-SiO$_2$-MgO-B$_2$O$_3$) with admixtures of TiO$_2$ have been investigated. The dielectric constant value of 7.5 ∼ 7.8, qualify factor value of 700 were obtained for glass frit : Al$_2$O$_3$(50 : 50 wt%) ceramics. Addition of TiO$_2$ less than 5 wt% slightly increased the dielectric constant from 7.8 to 8.8 due to higher dielectric constant of TiO$_2$. With increasing the amount of TiO$_2$ up to 5 wt%, the temperature coefficient of dielectric properties was improved. When the TiO$_2$ 5 wt% were added, dielectric properties were dielectric constant 8.8, quality factor 840 and the temperature coefficient of dielectric 45 ppm/$^{\circ}C$ at a sintering temperature 920$^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.63-67
• /
• 1996

In this paper, effect of MnO$_2$ addition(0, 0.1, 0.2, 0.3, 0.5wt%) on the microstructure, dielectric and piezoelectric properties of [xPMW - (0.15-x) PNN] - [yPT-(0.85-y)PZ] (x=0, 0.01, 0.02, 0.03, 0.05, y = 0.35, 0.40, ().425, 0.45, 0.5) were investigated. When Ti/Zr ratio was 1.0, dielectric and piezoelectric properties were highest value. With PMW 2mol%, dielectric constant, dielectric constant (d$\_$33/, d$\_$31/) and electromechanical coupling factor (kp, k$\_$31/) were highest values of 1995, 479, 186(x10$\^$-12/C/N), 0.61, 0.36, respectively. With the addition of MnO$_2$, dielectric constant, electromechanical coupling factor (kp, k$\_$31/) were decreased, but with 0.3wt% MnO$_2$, eletromechanical coupling factor was highest value of 0.63. With the addition of MnO$_2$, mechanical quality(Q$\_$m/ was increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.131-134
• /
• 2001

In this paper, the piezoelectric and dielectric properties as a function of x and a in $aPbZr_xTi_{1-x}O_3-(1-a)Pb(Mn_{1/3}Nb_{2/3})O_3$ + ywt%MgO is investigated. As a results, when a is 0.95 and x is 0.505, electromechanical coupling factor$(k_p)$, permittivity${\varepsilon}_33^T/{\varepsilon}_0$, piezoelectric strain constant$(d_{33})$ and mechanical quality factor$(Q_m)$ are 58 %, 1520, 272 pC/N and 1550, respectively. From XRD analysis, when x is 0.505, it is MPB which present rhombohedral and tetragonal phase in same quantity. Also, From SEM observation, when sintering temperature is $1150^{\circ}C$, grain size is about $2\;{\mu}m$. As a results added MgO dopant in the ternary piezoelectric ceramic, when MgO content is 0.1 wt%, $k_p$ increases to 63[%].