• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.88-93
• /
• 1999

This paper presents the experimental examinations and statistical quantitative analysis of the correlation between the cumulative counts of acoustic emission(AE) during plastic deformation periods of the welding and the tensile strength and other properties of the bar-to-bar welded joints of O.D. 16mm shaft(SM40C) as well as the various welding variables. And this is a new approach which attempts finally to develop real-time quality monitoring system for friction welding. The results lead to a practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro structural defects.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2018

We aimed to develop a high quality 3.5 ton class swing reducer by studying the efficiency improvement of the reducer through the optimum design and performance evaluation of the assembled, high efficiency, lightweight 3.5 ton swing reducer. Based on the optimal design of the worm and worm wheel, the optimal manufacturing method of the worm wheel, the optimized casing design, and the optimum design of the output pinion, Respectively. Therefore, in this paper, to improve the efficiency of the worm gear reducer system, we will develop the manufacturing technology and verify the mass production by combining the manufacturing process design, processing and assembling technology according to the optimization design. We have conducted research to realize mass production by product verification such as product efficiency, reliability and durability according to optimal design of worm gear reducer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.2
• /
• pp.202-213
• /
• 1985

The protein nutritional quality of foods has become an important factor to food processors with the advent of nutritional labeling regulations for foods. Then, as is true today, the officially approved assay for protein nutritional quality was the rat based protein efficiency ratio(PER) bioassay. The PER bioassay requires a minimum of 28 days to performe, and is therefore not applicable to routine quality assurance use by the food industry. Within the past ten years there has been a research emphasis placed on the development of rapid, inexpensive, biological and/or chemical based assays for protein nutritional quality. It was hoped that if a rapid assay could be developed and thoroughly tested, it could be used in lieu of the PER bioassay in the day-to-day quality assurance screening of food ingredients and products. The rapid assays developed in the hope of attaining this goal have been based on microorganisms, proteolytic enzymes, and amino acid profiles, as well as combinations of the above. In this review, it will be described and briefly discussed many of procedures which had contributed conceptually as well as practically to the development of in vitro methods for the evaluation of protein quality. Special emphasis will be placed on the C-PER(computed protein efficiency ratio) assay which combines data from in vitro protease digestion and amino acid composition to predict protein nutritional quality designed by Satterlee et al. (1980), and the DC-PER(discriminant computed PER) which is a method of estimating protein quality based on rat assay and in vitro digestibility obtained using solely essential amino acid data will be also introduced.

• Journal of Korean Elementary Science Education
• /
• v.27 no.2
• /
• pp.201-209
• /
• 2008

The purpose of this study was to develop an instrument for evaluating quality of the web site about elementary science education. Eight experienced specialists (three elementary science education specialists and five elementary school teachers engaging) in elementary science education verified content validity twice. The evaluation criteria for elementary school science were considering aspects of the characteristic and the quality of web site. The evaluation criteria can be categorized as being in five areas, fifty-seven items. The five areas were a purpose, a credibility, an efficiency, a data-type, an interactivity. Four web sites were analyzed for the subject of this study. Evaluators were nine elementary school teachers, who were educated in the use of instrument. The developed evaluation instrument in this study is considered valid and reliable. The content validity is 91.1%, and the reliability has a Cronbach's ${\alpha}$ of .82. The developed evaluation instrument in this study will verify the quality of web site, provide teachers and students with efficient information about elementary science education. In addition it suggests guidelines about design and devise web site to instructional developer or subject-matter expert.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.757-766
• /
• 1985

Both in-process quality control and high reliability of the weld is one of the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is available at present to determine the real-time evaluation of automatic production quality control for friction welding machine. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the initial cumulative counts of acoustic emission(AE) occurring during plastic deformation period of the welding and the tensile strength of the welded joints as well as the various welding variables, as a new approach which attempts finally to develop an on-line (or real-time) quality monitoring system and a program for the process of real-time friction welding quality evaluation by initial AE cumulative counts. As one of the important results, it was well confirmed that the initial AE cumulative counts were quantitatively and cubically correlated with reliability of 95% confidence level to the joint strength of the welds, bar-to-bar (SCM4 to SUM31, SCM4 to SUM24L) and that an AE technique using initial AE counts can be reliably applied to real-time strength evaluation of the welded joints, and that such a program of the system was well developed resulting in practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro-structural defects.

• Journal of Korean Society on Water Environment
• /
• v.26 no.1
• /
• pp.160-167
• /
• 2010

In this research, the performance evaluation between an alternating type process and a recirculating type process was investigated by using mathematical models. The Advanced Phase Isolation Ditch (APID) process and the $A^2/O$ process were selected the target processes of the alternating type and recirculating type, respectively. For more quantitative evaluation, 5 performance indexes which included economy and energy efficiency as well as effluent quality were used, and various disturbance conditions of influent were given to the process models. As simulation results, the APID process which had the specific operation modes to use the organic matter in influent effectively showed higher efficiency of denitrification than the $A^2/O$ process. In the case of effluent TSS, the $A^2/O$ process that the retention time in reactors could be maintained stably was more effective than the APID process. In the cases of various disturbance condition, although it was identified that both two processes had similar effluent quality, the sludge production of the $A^2/O$ process showed lower than that of the APID process while the APID process showed higher energy efficiency.

• Journal of Information Science Theory and Practice
• /
• v.8 no.2
• /
• pp.68-78
• /
• 2020

This study is a preliminary study to develop an evaluation framework necessary for evaluating the DataON platform. The first objective is to examine expert perceptions of the level of DataON platform construction. The second objective is to evaluate the importance, stability, and usability of DataON platform features over OpenAIRE features. The third objective is to derive weights from the evaluation perspective for future DataON platform evaluation. The fourth objective is to examine the preferences of experts in each evaluation perspective and to derive unbiased evaluation criteria. This study used a survey method for potential stakeholders of the DataON platform. The survey included 12 professionals with at least 10 years of experience in the field. The 57 overall functions and services were measured at 3.1 out of 5 for importance. Stability was -0.07 point and usability was measured as -0.05 point. The 42 features and services scored 3.04 points in importance. Stability was -0.58 points and usability was -0.51 points. In particular, the stability and usability scores of the 42 functions and services provided as of 2018 were higher than the total functions were, which is attributed to the stable and user-friendly improvement after development. In terms of the weight of the evaluation point, the collection quality has the highest weight of 27%. Interface usability is then weighted 22%. Subsequently, service quality is weighted 19%, and finally system performance efficiency and user feedback solicitation are equally weighted 16%.

• Asia pacific journal of information systems
• /
• v.16 no.1
• /
• pp.23-43
• /
• 2006

By far, numerous e-government projects requiring huge investments have been conducted in Korea to increase the administrative efficiency and improve the service quality via Internet. However, there's little research focusing on methods and techniques for analyzing and evaluating the projects either to economically justify the investments or to assess the quality of the system and of on-line services to citizens. The purpose of this paper is to suggest a set of factors to take into account for evaluating e-government portals and to empirically test the factors to provide useful implications for building such portals. Based on the literature reviewed, we constructed a research model that includes content, public service, community, design, technology, and portal's attributes as independent variables and the user's satisfaction and the administrative efficiency as dependent variables. A reliability test revealed that the evaluation factors proposed in the paper are sufficiently reliable, and a multi-regression analysis indicated that five hypotheses should be accepted. The findings of the study suggest that emphasis should be placed on public service quality and portal site attributes, among others, when implementing portals.

• Korean Journal of Digital Imaging in Medicine
• /
• v.15 no.1
• /
• pp.47-54
• /
• 2013

This study evaluated the apron quality management and shield efficiency in the education laboratory for radiology students. For making a proposal of effective control of lead apron, Eighteen aprons, used in 4 university laboratories of dae-gu, Kyungpook area, were analyzed regarding their uniformities, transmission doses, lead equivalent and shield efficiencies. In conclusion, the lead apron uniformity was generally good. Also, the shield efficiency corresponding to lead equivalent was high. However, the quality control of lead apron was not satisfactory. Since there is a potentially possible chance for students to be exposed to a radiation during practical radiation-training in the education laboratory, the quality-control maintenance of the lead apron should be unceasingly maintained for the radiation protection.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.2
• /
• pp.102-108
• /
• 2017

Videos for 360-degree virtual reality (VR) systems have a large amount of data because they are made with several different videos from multiple cameras. To store the VR data in limited space or to transmit it through a channel with limited bandwidth, the data need to be compressed at a high ratio. This paper focuses on the compression efficiency of VR videos for good visual quality. Generally, 360-degree VR videos should be projected into the planer format to cope with modern video coding standards. Among various projection schemes, three typical schemes (equirectangular, line-cubic, and cross-cubic) are selected and compared in terms of compression efficiency and quality using various videos.