최근 다엽콜리메이터를 부착한 선형가속기를 이용한 방사선수술의 빈도가 점차 높아지고 있다. 이러한 정교한 방사선 수술은 소조사면 내에 고선량의 방사선이 집중적으로 조사되기 때문에 체계적이고 정확한 정도관리가 필수적이다. 본 연구는 PIB(Particle in Binder) 방식 중 침전법을 이용하여 $400{\mu}m$ 두께의 요오드화납($PbI_2$)과 요오드화수은($HgI_2$) 광도전체 센서 시편를 제작하였다. 제작된 시편의 전기적 특성은 암전류, 출력전류, 응답특성 및 선형성을 평가하였다. 평가 결과, $HgI_2$ 가 우수한 신호발생량과 선형성을 보였다. 끝으로, 두께에 따른 $HgI_2$ 센서의 신호반응 특성 결과, $400{\mu}m$ 두께에서 신호발생효율이 가장 높았고, ${\pm}2.5%$ 이내의 우수한 재현성을 보였다.
On this research, laser welding technology for manufacturing automobile body is studied. Laser welding technology is one of the important technologies used in the manufacturing of lighter, safer automotive bodies at a high level of productivity; the leading automotive manufacturers have replaced spot welding with laser welding in the process of car body assembly. Korean auto manufacturers are developing and applying the laser welding technology using a high output power Nd:YAG laser and a 6-axes industrial robot. On the other hand, the robot-based remote laser welding system was equipped with a long focal laser scanner system in robotic end effect. Laser system, robot system, and scanner system are used for realizing the high speed laser welding system. The remote laser welding system and industrial robotic system are used to consist of robot-based remote laser welding system. The robot-based remote laser welding system is flexible and able to improve laser welding speed compared with traditional welding as spot welding and laser welding. The robot-based remote laser systems used in this study were Trumpf's 4kW Nd:YAG laser (HL4006D) and IPG's 1.6kW Fiber laser (YLR-1600), while the robot systems were of ABB's IRB6400R (payload:120kg) and Hyundai Heavy Industry's HX130-02 (payload:130kg). In addition, a study of quality evaluation and monitoring technology for the remote laser welding was conducted. The welding joints of steel plate and steel plate coated with zinc were butt and lapped joints. The quality testing of the laser welding was conducted by observing the shape of the beads on the plate and the cross-section of the welded parts, analyzing the results of mechanical tension test, and monitoring the plasma intensity and temperature by using UV and IR detectors. Over the past years, Trumf's 4kW Nd:YAG laser and ABB's IRB6400R robot system was used. Nowadays, the new laser source, robot and laser scanner system are used to increase the processing speed and to improve the efficiency of processes. This paper proposes the robot-based remote laser welding system as a means of resolving the limited welding speed and accuracy of conventional laser welding systems.
본 연구에서는 무인항공영상의 품질 평가를 위해 공간해상도 검정 방법 중 하나인 MTF(Modulation Transfer Function)를 Circular target을 이용하여 평가하는 방안을 제시하고, MATLAB GUI 기반 해상도 분석 Tool을 제작하여 무인항공영상 품질의 신뢰도와 작업의 효율성을 높이고자 하였다. 이를 위해 무인항공기체인 DJI Phantom 4 Pro(FC 6310)기체는 80m, 120m, 150m, Matrice 600(iXM-100)기체는 150m, 200m, 400m의 서로 다른 고도에서 촬영하였으며, 유인항공영상과 비교를 위해 UltraCAM Eagle Mark 2 센서로 비행고도 1000m에서 영상을 촬영하여 MTF를 비교하였다. 연구 결과 DJI Phantom 4 Pro(FC 6310)기체의 ${\sigma}MTFs$ 수치는 촬영고도에 따라 0.431, 0.524, 0.699, Matrice 600(iXM-100)기체의 ${\sigma}MTFs$ 수치는 촬영고도에 따라 0.332, 0.393, 0.631의 결과를 나타내어 촬영고도가 높아질수록 영상의 품질이 낮아짐을 알 수 있었다. 동일한 고도인 150m의 경우 탑재된 카메라의 성능이 높은 Matrice 600(iXM-100)기체의 영상품질이 매우 높은 결과를 나타내어 카메라의 성능이 영상의 품질에 미치는 영향을 확인할 수 있었다. 또한, UltraCAM Eagle Mark 2 센서를 탑재한 유인항공영상의 ${\sigma}MTF$ 수치는 높은 비행고도로 인하여 0.711의 결과를 나타내어 모든 무인항공영상의 품질보다 낮은 결과를 나타내었다. 하지만 DJI Phantom 4 Pro(FC 6310)기체의 150m 고도에서 촬영한 무인항공영상에서 ${\sigma}MTF$ 수치는 0.699의 결과를 나타내어 유인항공영상의 품질과 거의 비슷한 결과를 나타내었다.
Oh, Sang-Hyon;Lee, Chul Young;Song, Dong-Heon;Kim, Hyun-Wook;Jin, Sang Keun;Song, Young-Min
Journal of Animal Science and Technology
/
제64권2호
/
pp.353-364
/
2022
The present study aimed to assess the feasibility of increasing the slaughter weight (SW) of non-lean finishing pigs to improve their meat quality. A total of 36 (Landrace × Yorkshire) × Duroc gilts and barrows were slaughtered at 115 (Av), 125 (Hi), or 135 (XHi) kg, followed by physicochemical analyses and sensory evaluation on their longissimus dorsi (LD) and Semimembranosus (SM) muscles. Backfat thickness was greater (p < 0.05) for the XHi (31.2 mm) and Hi (29.3 mm) groups than for Av (25.0 mm). Dressing percentage and yield of the belly per whole carcass were also slightly greater for XHi and Hi vs. Av. The intramuscular fat (IMF) content of SM was greater for XHi (2.64%) than for Av (1.83%) and Hi (2.04%) and also was correlated with SW (r = 0.55). The pH value, lightness, redness, drip loss, shear force, and moisture and protein contents of LD and SM, as well as IMF content of LD, were unaffected by SW. Percentages of 14:0, 16:0, and total saturated fatty acids (FA) were less for Hi and XHi vs. Av in SM, those of total unsaturated FA, 18:2, 20:4, and n-6 being opposite; FA composition of LM was not influenced by SW except for a reduced 18:0 percentage for XHi vs. Av. The sensory score was less for XHi vs. Av for odor in fresh LD and SM, and less for Hi and XHi vs. Av for aroma in fresh LM; scores for color, drip loss, marbling, and acceptability were unaffected by SW. As for cooked muscles, none of the scores for color, aroma, flavor, juiciness, tenderness, and acceptability was affected by SW, except for a greater LD color score for Hi and XHi vs. Av. Collectively, the results suggested that the increased yield of the carcass and belly due to increased SW is outbalanced negatively by excessive backfat deposition in production efficiency, whereas the SW increase exerts little influence on overall sensory quality of fresh or cooked meat. Production of non-lean market pigs overweighing 115 kg therefore will be uneconomical unless consumers pay a substantial premium for the over-fattened pork.
데이터 3법과 데이터 산업법에 따라 가명정보 결합전문기관 및 데이터안심구역 시스템이 물리적으로 분리되어 운영 중이므로, 가명정보의 처리 및 활용을 원하는 중소기업 또는 스타트업 등의 사용자에게 복잡한 절차와 병목으로 인한 부담으로 작용한다. 또한, 개인정보의 유출 등을 우려한, 지나치게 엄격한 가명 처리 과정은 오히려 데이터의 품질을 훼손하는 역효과가 발생한다. 가명정보의 안전한 처리 및 활용을 위한 일련의 조치는 사용자의 편의와 데이터의 품질을 동시에 보장할 수 있도록 구성되어야 한다. 따라서 본 연구는 기존 가명정보 처리 및 활용의 문제점을 개선한 통합데이터안심구역의 프로토타입 시스템을 제시한다. 이를 위해 기존 BPR 가이드라인을 선택적으로 수정하여 새로운 워크플로우 재설계 가이드라인을 개발 및 적용하며, 핵심성능지표를 도출하여 개발된 프로토타입의 성능을 판단한다. 성능평가 결과 제시된 프로토타입은 기존의 시스템에 비해 시간적 측면에서는 약 6배, 비용적 측면에서는 1.28배, 품질적 측면에서는 1.3배의 향상된 성능을 보임을 확인하였다.
본 연구는 버크셔종의 육질에 대한 특성을 분석하여 국내 돈육시장에서의 적합성을 확인하고, MS marker를 이용한 육질 우수 개체 선발의 효율성에 대해서 분석하였다. 버크셔 323두를 동일 사양조건에서 사육하고 도축하여 육질형질을 분석하고, 혈액으로부터 genomic DNA를 분리하여 50개의 MS marker에 대한 유전자형을 분석하였다. 버크셔종은 국내에서 가장 많이 이용되고 있는 듀록, 요크셔, 랜드레이스 종보다도 육질에 있어서 더욱 우수한 특성을 나타내었다. 특히 도축 24시간 후 pH 값은 평균 $5.88{\pm}0.01$로 대단히 높게 나타났고, 지방함량의 경우에도 $2.878{\pm}0.06$로 확인되었다. MS marker와의 연관성을 확인한 결과, 14개 MS marker가 육질형질과 연관성을 있는 것으로 나타났다(p<0.05). 특히 pH24hr와 지방함량에서는 가장 높은 값을 가지는 대립유전자집단이 가장 낮은 집단에 비해 최고 0.55, 2.04%가 높은 것을 확인할 수 있었다. 이러한 특성을 버크셔종의 육질 우수 개체 선발에 이용한다면 육색, 지방함량, pH24hr, 가열감량, 드립감량, 그리고 보수성에서 육질 형질값의 높은 개량효과를 기대할 수 있을 것으로 판단된다.
강우사상이 발생함에 따라 시설용량을 초과하여 미처리된 상태로 방류수계에 직접 배출되는 합류식 관거 월류수(Combimed Sewer Overflows, CSOs) 및 분류식 관거 월류수(Separated Sewer Overflows, SSOs)의 관리는 집중호우가 잦아지는 근래에 들어 그 관리가 더욱 중요해지고 있다. 밀집도가 높은 도심지에 적용성이 유리한 여과기술은 지속적인 개발이 이루어지고 있음에도 불구하고 CSOs에 적용된 사례가 거의 전무한 실정이다. 따라서 본 연구에서는 로프형 섬유여재가 적용된 Pilot 규모의 수평흐름식 여과장치를 CSOs에 적용하기 위해 공정최적화를 목적으로 수행되었다. 연구방법은 인공시료를 적용한 사전연구와 하수를 적용한 현장연구로 구분하여 수행하였다. 인공시료를 적용한 사전연구에서 여재 자체의 손실수두는 약 1.1cm정도로 분석되었고, 선속도 10m/hr 증가에 따라 약 0.1cm 정도의 손실수두 증가를 유발하는 것으로 나타났다. 또한, SS 제거효율은 81.4% 정도로 안정적이었고, 여과지속시간은 6시간 이상 유지되었으며, 공기역세척만으로도 98% 정도의 손실수두 평균 회복율을 보였다. 하수를 적용한 현장평가에서는 여재의 조기폐색을 방지하기 위한 전처리공정으로 벨트 형 미세스크린(450mesh 이상)를 적용했을 때 2시간 내외의 여과지속시간을 확보할 수 있었고, 평균 83.9%의 SS 제거효율을 나타내었다. CSOs 및 SSOs에 여과공정 적용을 위해서는 효율적 측면보다 여과지속시간의 안정적 유지를 위한 수리적 측면을 보완하기 위해서 전처리공정과의 조합이 중요하다는 결론을 얻을 수 있었다. 건기와 비교하여 우기의 유입하수 수질은 다소 낮은 보였으며, 이는 분류식 관거 비율이 높은 배수구역의 특성 때문인 것으로 추정된다. 또한, 우기와 건기의 유입수질에 따른 제거효율 차이는 미미하였다.
거세 재래흑염소를 각 처리구별로 8두씩 배치하여 총24두(3처리$\times$8두)를 대상으로 대조구(무첨가)와 시험구인 T1구(한방제재 1%첨가)와 T2구(한방제재 2% 첨가)로 구분 배치하여 총 500일간 비육 시험한 결과는 다음과 같다. 비육 전기간(500일간) 동안의 총 증체량과 일당증체량은 T2가 28.30 kg과 0.057 kg으로 타 처리구보다 가장 높았다. 총 사료섭취량에서도 T2구가 519.20 kg으로 크게 높았으며, 사료요구율은 18.35으로 사료효율성이 가장 좋게 나타났다. 도체율은 T1구가51.10%로 가장 높았고(p<0.05), 흑염소 등심육의 가열감량과 드롭로스는 대조구가 시험구보다 크게 높았다(p<0.05). 콜레스테롤 함량은 시험구가 대조구보다 더 높은 경향이었지만 통계적인 유의차는 없었다(p>0.05). 또한 관능검사의 연도, 향미, 조직감 및 염소 특이취는 시험구가 대조구보다 크게 낮아져 (p<0.05), 종합적인 관능평가에서는 시험구(3.71점, 3.90점)가 대조구(4.82점)보다 더 좋게 되었다(p<0.05). 지방산 조성의 단가불포화지방산(MUFA)/포화지방산(SFA)과 불포화 지방산(UFA)/포화지방산(SFA)의 비율에서는 시험구가 대조구보다 더 높은 경향이었으나 통계적인 유의차는 없었다.
At present, many countries are trying to reduce green gas emissions to mitigate the effects of these gases on climate change. Year after year, there have been efforts to cut energy use for heating and cooling. Heating and cooling systems, common in all forms of housing, are increasing due to the constant supply of new housing resulting from improvements in economic growth and the quality of life. Thus, studies related to the design of cooling and heating systems to improve energy efficiency are expanding. Among the new designs, radiant floor cooling and heating systems which use capillary tubes are becoming viable means of reducing energy use. Radiant floor cooling and heating systems which use capillary tubes are creative and sustainable systems in which cool and hot water is circulated into capillary tube which has small diameter. In this study, the cooling and heating performance of this type of capillary tube system is investigated in an experimental study and a simulation using TRNSYS. The results of the experimental study show that under a peak load, a capillary tube radiant floor cooling system using geothermal energy can achieve desired indoor temperature without an additional heat source. The set room air temperature is maintained while the floor surface temperature, PMV and PPD remain within the comfort range. Also, this system is more economic than a packaged air conditioner system due to its higher COP. The results of the simulation show that the capillary tube radiant floor heating system maintains set temperature more stable than a PB pipe radiant floor heating system due to its lower supply temperature of hot water. In terms of energy consumption, the capillary tube radiant floor heating system is more efficient than the PB pipe radiant floor heating system.
Objective: The purpose of this study was to investigate the job stress factors of mobile communication network construction workers using survey based on 'Job stress factors evaluation tool for Koreans' that was developed by KOSHA in 2003. Background: Due to the rapid growth of penetration rate of smartphone, the necessity of LTE service changing from 3G network was brought up. The demand of LTE network construction in a short period of time leads to the aggravation of the job stress of mobile communication network construction workers. Method: Two hundred and fifty workers who were in the mobile communication network industry participated in this study, and among them 206 responses were analyzed for this study due to the unreliability and insincerity of responses. The eight job stress factors which are physical environment, job demand, job autonomy, relation conflict, job instability, organizational system, inadequate compensation, workplace culture were analyzed. Results: The job stress factors of mobile communication network construction workers were compared to those of other industry workers, and other work related characteristics were analyzed. The results showed that the stress level of a physical environment and job requirement were relatively higher than those of manufacturing industry workers, meaning that mobile communication network construction workers have rough working conditions and increased amount of work due to the demand of LTE network construction. The stress level of physical environment for outdoor job workers was relatively higher than that of indoor job workers. With the analytical result for level of job satisfaction, significant difference was observed (p <0.05) with every factor, and the job stress was found the highest with those not satisfied with every factor Conclusion: From the results of this study, the work loss due to the job stress could be prevented, and accurate stress factors could be removed at the workplace. Application: The results of this study may not represent the whole mobile network construction workers, the effort for job stress management is needed to improve the work efficiency and the workers' quality of life.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.