• Industrial Engineering and Management Systems
• /
• 제13권2호
• /
• pp.231-249
• /
• 2014

This paper discusses a green supply chain with a manufacturer and a collection trader, and it proposes an optimal production planning for remanufacturing of parts in used products with quality classification errors made by the collection trader. When a manufacturer accepts an order for parts from a retailer and procures used products from a collection trader, the collection trader might have some quality classification errors due to the lack of equipment or expert knowledge regarding quality classification. After procurement of used products, the manufacturer inspects if there are any classification errors. If errors are detected, the manufacturer reclassifies the misclassified (overestimated) used products at a cost. Accordingly, the manufacturer decides to remanufacture from the higher-quality used products based on a remanufacturing ratio or produce parts from new materials. This paper develops a mathematical model to find how quality classification errors affect the optimal decisions for a lower limit of procurement quality of used products and a remanufacturing ratio under the lower limit and the expected profit of the manufacturer. Numerical analysis investigates how quality of used products, the reclassification cost and the remanufacturing cost of used products affect the optimal production planning and the expected profit of a manufacturer.

• Imaging Science in Dentistry
• /
• 제49권3호
• /
• pp.219-228
• /
• 2019

Purpose: The aim of this study was to determine the reasons and solutions for intraoral phosphor storage plate (PSP) image artifacts and errors, and to develop an appropriate classification of the artifacts. Materials and Methods: This study involved the retrospective examination of 5,000 intraoral images that had been obtained using a phosphor plate system. Image artifacts were examined on the radiographs and classified according to possible causative factors. Results: Artifacts were observed in 1,822 of the 5,000 images. After examination of the images, the errors were divided into 6 groups based on their causes, as follows: images with operator errors, superposition of undesirable structures, ambient light errors, plate artifacts (physical deformations and contamination), scanner artifacts, and software artifacts. The groups were then re-examined and divided into 45 subheadings. Conclusion: Identification of image artifacts can help to improve the quality of the radiographic image and control the radiation dose. Knowledge of the basic physics and technology of PSP systems could aid to reduce the need for repeated radiography.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2021-2028
• /
• 2010

국외에서는 대형시스템을 사용하는 항공, 해양, 원자력, 철도 등에서 발생하는 사고 중 인적오류가 포함된 사고에 대한 분석 및 연구가 활발히 진행되고 있다. 우리나라에서는 영국, 미국 등의 철도선진국과 비교하여 인적오류를 고려한 철도시스템의 체계적인 운영이 미흡하며, 관련 기준을 별도로 규명하지 않고 있는 실정이다. 또한, 사고 분석을 위한 방법이나 절차, 인적오류와 관련된 원인요소에 대한 항목이 제한적이어서 사고분석이 어려운 실정이다. 이에 본 연구에서는 철도사고구분에 따른 위험사건들을 체계화하여 기관사, 사령, 역무원을 포함한 철도안전업무종사자의 수행도에 영향을 끼칠 수 있는 인적오류원인들을 국내외 연구결과를 바탕으로 체계화하고, 국내 철도 사고 사례를 통해 적합한 인적오류원인을 도출할 수 있는 분류방안을 마련한다.

• Journal of Multimedia Information System
• /
• 제8권4호
• /
• pp.211-220
• /
• 2021

The process of inspecting SMDs on the PCB boards improves the product quality, performance and reduces frequent issues in this field. However, undesirable scenarios such as assembly failure and device breakdown can occur sometime during the assembly process and result in costly losses and time-consuming. The detection of these components with a model based on deep learning may be effective to reduce some errors during the inspection in the manufacturing process. In this paper, YOLO models were used due to their high speed and good accuracy in classification and target detection. A SMD detection and classification method using YOLO networks based on robust data preprocessing and augmentation techniques to deal with various types of variation such as illumination and geometric changes is proposed. For 9 different components of data provided from a PCB manufacturer company, the experiment results show that YOLOv4 is better with fast detection and classification than YOLOv3.

• 한국빅데이터학회지
• /
• 제2권2호
• /
• pp.75-86
• /
• 2017

본 연구에서는 빅데이터의 품질을 진단하는 방법을 자동화하는 방법을 제안하고 있다. 빅데이터의 품질진단을 자동화해야 하는 이유는 4차 산업혁명이 이슈화 되면서 과거보다 더 많은 볼륨의 데이터를 발생시키고 이 데이터들을 활용 하려는 요구가 증가하기 때문이다. 데이터는 급증하지만 데이터의 품질을 진단하기 위해 많은 시간이 소비된다면 데이터를 활용하기 위해 많은 시간이 걸리거나 데이터의 품질이 낮아질 수 있다. 그러면 이러한 낮은 품질의 데이터로부터 의사결정이나 예측을 한다면 그 결과 또한 잘못된 방향을 제시할 것이다. 이러한 문제를 해결하기 위해 많은 데이터를 신속하게 진단하고 개선할 수 있는 머신러닝 이용한 빅데이터 품질 향상을 위한 진단을 자동화 할 수 있는 모델을 개발하였다. 머신러닝을 이용하여 도메인 분류 작업을 자동화하여 도메인 분류 작업 시 발생할 수 있는 오류를 예방하고 작업 시간을 단축시켰다. 연구 결과를 토대로 데이터 변환의 중요성, 학습되지 않은 데이터에 대한 학습 시킬 수 있는 방안 모색, 도메인별 분류 모델을 개발에 대한 연구를 지속적으로 진행한다면 빅데이터를 활용하기 위한 데이터 품질 향상에 기여할 수 있을 것이다.

• 품질경영학회지
• /
• 제45권1호
• /
• pp.117-128
• /
• 2017

Purpose: This study analyzes automobile quality review data to develop alternative analytical method of informal data. Existing methods to analyze informal data are based mainly on the frequency of informal data, however, this research tries to use correlation information of each informal data. Method: After sentimental analysis to acquire the user information for automobile products, three classification methods, that is, $na{\ddot{i}}ve$ Bayes, random forest, and support vector machine, were employed to accurately classify the informal user opinions with respect to automobile qualities. Additionally, Word2vec was applied to discover correlated information about informal data. Result: As applicative results of three classification methods, random forest method shows most effective results compared to the other classification methods. Word2vec method manages to discover closest relevant data with automobile components. Conclusion: The proposed method shows its effectiveness in terms of accuracy and sensitivity on the analysis of informal quality data, however, only two sentiments (positive or negative) can be categorized due to human errors. Further studies are required to derive more sentiments to accurately classify informal quality data. Word2vec method also shows comparative results to discover the relevance of components precisely.

• 한국측량학회지
• /
• 제17권2호
• /
• pp.129-136
• /
• 1999

영상분류 결과는 지형적 영향, 영상의 상태 등에 따라 전체 영상에 대하여 균일하지 않을 수 있다. 본 연구에서는 분류 결과의 불균일성과 위성영상 분류 오차의 공간적 분포를 평가하기 위해 ISDd (Index of Spatial Distribution by distance) 와 ISDs (ISD by scatteredness)의 개념을 제안하였다. ISDd는 지표화된 오분류 화소간의 거리이고, ISDs는 오분류 화소의 산포도에 관한 통계적 지표이다. 실제 위성영상에 대한 실험을 통하여 ISDd와 ISDs를 계산 및 평가하였으며, 실제 국지적 오분류 영역을 추출하여 오분류의 원인을 고찰하였다. 본 연구 결과, ISDd와 ISDs를 동시에 사용하여 오분류 화소의 국지적 밀집 여부와 밀집 정도의 평가가 가능하였으며, 그 결과를 토대로 영상의 일부분에 대한 분류결과의 채택/기각을 결정할 수 있었다. 따라서, 전체 분류정확도 외에 공간분포지표를 사용함으로써 사용자는 오분류 화소의 공간적 분포 상태를 파악할 수 있으며, 분류 결과의 적합성 및 신뢰성 판단을 위한 추가적인 기준을 가질 수 있다.

• Imaging Science in Dentistry
• /
• 제42권3호
• /
• pp.183-190
• /
• 2012

Purpose: The purpose of this study was to investigate the level of clinical image quality of panoramic radiographs and to analyze the parameters that influence the overall image quality. Materials and Methods: Korean dental clinics were asked to provide three randomly selected panoramic radiographs. An oral and maxillofacial radiology specialist evaluated those images using our self-developed Clinical Image Quality Evaluation Chart. Three evaluators classified the overall image quality of the panoramic radiographs and evaluated the causes of imaging errors. Results: A total of 297 panoramic radiographs were collected from 99 dental hospitals and clinics. The mean of the scores according to the Clinical Image Quality Evaluation Chart was 79.9. In the classification of the overall image quality, 17 images were deemed 'optimal for obtaining diagnostic information,' 153 were 'adequate for diagnosis,' 109 were 'poor but diagnosable,' and nine were 'unrecognizable and too poor for diagnosis'. The results of the analysis of the causes of the errors in all the images are as follows: 139 errors in the positioning, 135 in the processing, 50 from the radiographic unit, and 13 due to anatomic abnormality. Conclusion: Panoramic radiographs taken at local dental clinics generally have a normal or higher-level image quality. Principal factors affecting image quality were positioning of the patient and image density, sharpness, and contrast. Therefore, when images are taken, the patient position should be adjusted with great care. Also, standardizing objective criteria of image density, sharpness, and contrast is required to evaluate image quality effectively.

• 방송공학회논문지
• /
• 제18권5호
• /
• pp.771-774
• /
• 2013

본 연구는 감정상태와 음색특성의 관계를 확인하고, 추가로 cepstral 피쳐와 조합하여 감정인식을 진행하였다. Open quotient, harmonic-to-noise ratio, spectral tilt, spectral sharpness를 포함하는 특징들을 음색검출을 위해 적용하였고, 일반적으로 사용되는 피치와 에너지를 기반한 운율피쳐를 적용하였다. ANOVA분석을 통해 각 특징벡터의 유효성을 살펴보고, sequential forward selection 방법을 적용하여 최종 감정인식 성능을 분석하였다. 결과적으로, 제안된 피쳐들으로부터 성능이 향상되는 것을 확인하였고, 특히 화남과 기쁨에 대하여 에러가 줄어드는 것을 확인하였다. 또한 음색관련 피쳐들이 cepstral 피쳐와 결합할 경우 역시 인식 성능이 향상되었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.314-324
• /
• 1996

A high speed NMR quality evaluation sensor was designed , constructed and tested . The device consists of an NMR spectrometer coupled to a conveyor system. The conveyor was run at speeds ranging from 0 to 250 mm/s. Spectral of avocado fruits and one-dimensional magnetic resonance images of pickled olives were acquired while the samples were moving on a conveyor belt mounted through a 20Tesla NMR magnet with a 20 mm diameter surface coil and a 150 mm diameter imaging coil respectively. Fro a magnetic resonance spectrum analysis, motion through variations in the magnetic field tends to narrow spectral line width just like using sample rotation in high resolution NMR to narrow spectral line width. Spectrum analysis was used to detect the dry weight of avocado fruits using the ratio oil and water resonance peaks. Good correlations maximum r=0.970@ 50 mm/s and minimum r=0.894@250mm/s ) between oil and water resonance peak ratio and dry weight of avocados were observed at speeds ra ging from0 to 250mm/s. For the application of magnetic resonance imaging (MRI) method, the projections were used to distinguish between pitted and non-pitted olives . Effect of fruit position in the coil was tested and coil degree effects were noticed when projects were generated under dynamic conditions. Various belt speeds (up to 250mm/s) were tested and detection results were compared to static measurements. Higher classification errors were occurred at dynamic conditions compared to errors while olives were at rest.