• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.347-353
• /
• 2004

Due to various advantages over the conventional linear motion device such as ball-screw, linear motors have been used in wide variety of industrial applications for years. Driven by increased demand for precision machine tools, the importance of high positioning accuracy, high stiffness and high thrust are greatly increasing. The merits of linear motor are high speed high acceleration and good positioning accuracy. In addiction, Linear motor for high qualify machine tool call for high thrust, high stiffness. In this paper, thrust ripple, detent force and thermal behavior are considered for the development of high performance linear motor whose thrust is up to 1,900N. This paper presents a comprehensive study for an iron core type linear motor characteristics that include the influence of PM position on thrust ripple by detent force and motor dynamics as well.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.595-598
• /
• 2005

The impact sound of the golf club is one of the major factors to purchase it. Sound qualify evaluation techniques are mostly developed for harmonic sounds. Sound quality metrics for the impact sound is proposed in this study. Jury test, one of the typical subjective evaluation scheme, is carried out for evaluating the sound quality of 11 different golf drivers. Above subjective classification results are assumed to be the right answers. Conventional objective evaluation methods such as Zwicker loudness sensory pleasantness are calculated. Wavelet analysis and instantaneous loudness are applied in order to evaluate the transient sounds, which shows better correlation with the results from those by jury test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.529-534
• /
• 2005

This study performed an physical analysis on the characteristics of urban environmental sound divided into three parts depending on their features. Object sounds were classified into traffic sound, waster sound and spatial sound. Traffice sound was selected because it is dominant sound in urban environment, and water sound is selected because it generally supplies pleasantness in contrast to traffic sound, Finally spatial sound was considered because it represents sound in various places of city having lots of behaviors and types of sound due to them. Physcal analysis was carried out using sound quality indices based on Zwicker's loudness, $L_{Aeq}$(equivalent noise level), Ln(percentile noise level) and other acoutical attributes applied to previous study. Through the analysis, this study aims to compare the acoustical characteristics of urban environmental sound and to provide fundamental data for the evaluation of urban environmental sound.

• 품질경영학회지
• /
• 제31권4호
• /
• pp.36-54
• /
• 2003

There have been academic debates upon which measure is more desirable in measuring service qualify between SERVQUAL and SERVPERF. In addition, Korean air lines industry is rapidly growing due to the increase of Koren family income and globalization. This study tried to contribute to both academic and practical issues. This study compared SERVQUAL and SERVPERF measures to determine which is superior to measure service quality in Korean air lines industry. Data was collected from two airliners' customers of Korea. According to the results of confirmatory factor analyses, regression analyses and analyses of goodness of fit, SERVPERF appears to be better in measuring service quality in Korean air lines industry than SERVQUAL. We suggest that SERVPERF be used to measure service quality in Korean air lines industry.

• 대한방사선기술학회지:방사선기술과학
• /
• 제7권1호
• /
• pp.13-21
• /
• 1984

Subtraction is an essential technic to improve imaging quality in various radiological procedures. The limitations of subtraction, however, are well known. Blurred under-subtraction (BUS) method has been suggested to overcome and compensate these limitations. Ten cases of angiography were subtracted by conventional subtraction and BUS technic. Results of this study revealed that BUS method is simple to perform and imaging quality obtained by BUS is excellent. Comparing to conventional subtraction, BUS method has advantages. For example, BUS need no mask film or no immobilization of patient during examination. Improvement of imaging Qualify is achieved by edge enhancement, homogeneous blurring of background density and increasing contrast. With emphasis of its simplicity in technic, we would report that BUS method is a useful adjunct imaging technic in various radiological procedures.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1348-1352
• /
• 2005

본 논문에서는 두 가지 대표적인 하천수질모형을 금강유역에 대하여 구축하고 이들을 비교분석하였다. 정상상태 모형은 범용으로 사용되는 QUAL2E, 비정상상태 모형으로는 CE-QUAL-RIV1을 선택하여 동일한 반응계수 및 경계조건 하에서 두 모형의 계산결과를 비교하였다. 두가지 수질모형을 이용하여 대청댐 이하 금강본류의 수질모의를 실시하고 각 모형에 대한 수질변동을 파악하기 위하여 적용된 방정식을 서로 비교하였다. 두 모형을 동일한 정상상태로 구성하였을 때 그 결과값과 변동양상은 매우 비슷하였으며 특히 BOD와 DO, 및 $NH_3-N$의 경우 일치도가 상당히 높았다. 그러나 특정수질인자 즉, 용존인과 같은 항목은 상당한 차이를 보였다. 이러한 모의결과를 바탕으로 각 모형의 민감도 분석을 바탕으로 각 수질항목에 지배적으로 작용하는 매개변수를 정리하고 도표화 하였다.

• 한국유체기계학회 논문집
• /
• 제7권2호
• /
• pp.14-20
• /
• 2004

In this study, the overall performance and the local flow field of the centrifugal compressor with the refrigerant HFC-l34a were numerically studied using CFX-TASCflow. The thermodynamic and transport properties of the refrigerant gas were modeled by REFPROP which is NIST refrigerant properties database. The impacts of a grid qualify, discretization scheme, turbulent model and interaction between a impeller and a cascade diffuser were analyzed comparatively. The results were compared with experimental data and 1-D design results using COMPAL and agreed well with others. The numerical method and data obtained in this study can be applied to the design and modification of centrifugal compressors with real gases

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.61-71
• /
• 2006

This paper addresses the factors hindering the image quality of lines in inkjet printed on polyester fabric as printing media. Lines were printed onto different types of polyester fabrics in warp and filling directions. Line image quality including line width, edge blurriness, and edge raggedness was assessed. The effect of capillary wicking on line image quality of printed spun polyester fabric is discussed. The factors on the image quality include printing position(top of the yam or between the yarn), printing direction(warp or filling), yarn structures(filament or spun), thread size(yam or fiber), finishing, and ink properties(evaporation rate). More than 30% differences in image quality results were observed by changing the printing location on the spun polyester fabric. The best results of the image quality were obtained with the printed plain and spun polyester fabrics. The fiber sizes may affect capillary size; therefore, the image quality can be dissimilar. Types of finishing materials and inks greatly improve the line image quality on spun polyester fabrics.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.73-76
• /
• 2005

Recently, Trouble of sand supply is occurred according to exhaustion of natural sand resources. therefore, various measures are proposed for solution of trouble of sand supply and crushed sand among measures is used as one of most universal measures. but crushed sand which have poor particle shape and plenty of makes micro particle the qualify of concrete deteriorated. Therefore, this study evaluated physical properties of mortar using crushed sand and applied evaluation result to fundamental data The result of this study have shown that quality of mortar using crushed sand independently is poor against general mortar. but, mortar flow and compressive strength is increased in case of using crushed sand according to mixing ratio properly.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.45-48
• /
• 2005

This study is basic experiment for estimating influence of strength by curing temperature of concrete's heat of hydration and estimate relationship of compressive strength development by initial curing temperature factor, and then asume temperature factor which influence compressive strength development and for showing basic document of qualify control. According to the result of cement mortar by the curing temperature factor high-curing temperature shows high strength on 3 day compare with low curing-temperature, shows higher strength than the piece of high curing temperature.