• Journal of Multimedia Information System
• /
• 제7권3호
• /
• pp.231-238
• /
• 2020

This work presents a fully analog baseline wander tracking and removal circuitry using high-pass filter (HPF) based R-peak detection and quadratic interpolation that does not require digital post processing, thus suitable for compact and low power long-term ECG monitoring devices. The proposed method can effectively track and remove baseline wander in ECG waveforms corrupted by various motion artifacts, whereas minimizing the loss of essential features including the QRS-Complex. The key component for tracking the baseline wander is down sampling the moving average of the corrupted ECG waveform followed by quadratic interpolation, where the R-peak samples that distort the baseline tracking are excluded from the moving average by using a HPF based approach. The proposed circuit is designed using CMOS 0.18-㎛ technology (1.8V supply) with power consumption of 19.1 ㎼ and estimated area of 15.5 ㎟ using a 4^th order HPF and quadratic interpolation. Results show SNR improvement of 10 dB after removing the baseline wander from the corrupted ECG waveform.

• 대한수학회지
• /
• 제49권2호
• /
• pp.395-404
• /
• 2012

Our first aim of this paper is to define maximal operators a-quadratic variation and of a-conditional quadratic variation for vectorvalued tree martingales and to show that these maximal operators and maximal operators of vector-valued tree martingale transforms are all sublinear operators. The second purpose is to prove that maximal operator inequalities of a-quadratic variation and of a-conditional quadratic variation for vector-valued tree martingales hold provided 2 ${\leq}$ a < $\infty$ by means of Marcinkiewicz interpolation theorem. Based on a result of reference [10] and using Marcinkiewicz interpolation theorem, we also propose a simple proof of maximal operator inequalities for vector-valued tree martingale transforms, under which the vector-valued space is a UMD space.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1043-1050
• /
• 2018

For an efficient Monte Carlo (MC) burnup analysis, an accurate high-order depletion scheme to consider the nonlinear flux variation in a coarse burnup-step interval is crucial accompanied with an accurate depletion equation solver. In a Seoul National University MC code, McCARD, the high-order depletion schemes of the quadratic depletion method (QDM) and the linear extrapolation/quadratic interpolation (LEQI) method and a depletion equation solver by the Chebyshev rational approximation method (CRAM) have been newly implemented in addition to the existing constant extrapolation/backward extrapolation (CEBE) method using the matrix exponential method (MEM) solver with substeps. In this paper, the quadratic extrapolation/quadratic interpolation (QEQI) method is proposed as a new high-order depletion scheme. In order to examine the effectiveness of the newly-implemented depletion modules in McCARD, four problems in the VERA depletion benchmarks are solved by CEBE/MEM, CEBE/CRAM, LEQI/MEM, QEQI/MEM, and QDM for gadolinium isotopes. From the comparisons, it is shown that the QEQI/MEM predicts ${k_{inf}}^{\prime}s$ most accurately among the test cases. In addition, statistical uncertainty propagation analyses for a VERA pin cell problem are conducted by the sensitivity and uncertainty and the stochastic sampling methods.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.659-662
• /
• 2000

다양한 보간 기법을 정리해 보고 이를 통해서 기존의 보간 기법의 한계를 고찰해 본다. 보간의 효율성과 보간 결과 영상의 화질과는 Trade off 관계가 있으며, 이를 적절한 수준에서 결정하는 것은 중요한 문제이다. 본 논문에서는 Quadratic B-spline을 기저 함수로 하는 윤곽보존형 보간 필터를 사용한 영상확대 알고리즘을 제안한다. Unser의 Cardinal Cubic spline함수에 비해 적은 하드웨어만으로도 이상적인 저역 통과 필터의 특성을 가지며, 입력영상의 윤곽의 방향성을 고려한 적응적인 보간 기법의 적용으로 화질이 우수한 영상확대 알고리즘을 제안한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.397-403
• /
• 2010

The Immersed boundary method(IBM) is one of CFD techniques which can simulate flow field around complex objectives using simple Cartesian grid system. In the previous studies the IBM has mostly been implemented to fractional step method based Navier-Stokes solvers. In these cases, pressure buildup near IB was found to occur when linear interpolation and stadard mass conservation is used and the interpolation scheme became complicated when higher order of interpolation is adopted. In this study, we implement the IBM to an incompressible Navier-Stokes solver which uses SIMPLE algorithm. Bi-linear and quadratic interpolation equations were formulated by using only geometric information of boundary to reconstruct velocities near IB. Flow around 2D circular cylinder at Re=40 and 100 was solved by using these formulations. It was found that the pressure buildup was not observed even when the bi-linear interpolation was adopted. The use of quadratic interpolation made the predicted aerodynamic forces in good agreement with those of previous studies.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.599-604
• /
• 2017

Nowadays reactance method is being used as a technique for fault location in parallel feeding AC traction power system. However, implementation of this method requires a large number of field tests(ground fault) which is a huge burden on the operators. This paper presents a new estimation technique using quadratic interpolation to reduce number of times for field test and improves the accuracy of fault location. To verify a new technique, we solve AT feeding circuit and model it using PSCAD/EMTDC. Finally this paper conducts a comparative analysis of usefulness between a new technique and real field data.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.205-208
• /
• 2008

수치해석에서는 온도, 압력, 비체적, 엔탈피, 엔트로피 등의 수치값이 필요하다. 그런데 증기표의 대부분의 열역학적 성질들은 측정된 값이기 때문에 기본적으로 측정 오차를 가지고 있다. 본 연구에서는 압력 기준의 물의 포화 상태에 대해, 난수를 발생시켜 적절한 크기로 조절한 다음 원래의 성질들에 더하여 인위적으로 노이즈가 포함된 데이터를 만들었다. 이 데이터를 신경회로망과 스플라인 보간법으로 함수 근사를 하였다. 해석 결과 신경회로망이 2차 스플라인 보간법보다 훨씬 더 적은 백분율 오차를 보였으며 이로부터 신경회로망이 측정 오차의 영향을 적게 받는 함수 근사에 적절한 방법임을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.626-633
• /
• 2011

This paper presents a novel maximum efficiency control scheme for convergence improvement in stator-flux-oriented induction motor drives. Three input powers are calculated at three different flux levels, respectively. A quadratic curve is obtained using the quadratic interpolation method using the three points. The flux level at the lowest point of the interpolated curve is calculated, which is not the real minimum input power of the motor, but an estimated one. Hence, the quadratic interpolations are repeated with three new points chosen using the selection method for new points for refitting until the convergence criteria are satisfied. The proposed method is verified by simulation results.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.796-803
• /
• 2003

The discrete ordinates interpolation method (DOIM) has shown good accuracy and versatile applicability for the radiation $problems^{(1,2)}$. The DOIM is a nonconservative method in that the intensity and temperature are computed only at grid points without considering control volumes. However, when the DOIM is used together with a finite volume algorithm such as $SIMPLER^{(3)}$, intensities at the control surfaces need to be calculated. For this reason, a 'quadratic' and a 'decoration' schemes are proposed and examined. They are applied to two kinds of radiation problem in one-dimensional geometries. In one problem, the intensity and temperature are calculated while the radiative heat source is given, and in the other, the intensity and the radiative heat source are computed with a given temperature field. The quadratic and the decoration schemes show very successful results. The quadratic scheme gives especially accurate results so that further decoration may not be needed. It is recommended that the quadratic and the decoration schemes may be used together, or, one of them may be applied for control volume radiative energy balance.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.457-466
• /
• 2003

In this paper, the numerical finite element formulations were derived for the linearized Navier-Stokes' equations with assumptions of two-dimensional incompressible, homogeneous viscous fluid field, and small oscillation and the FAMD (Fluid Added Mass and Damping) code was developed for practical applications calculating the fluid added mass and damping. In formulations, a fluid domain is discretized with C$\^$0/-type quadratic quadrilateral elements containing eight nodes using a mixed interpolation method, i.e., the interpolation function for the velocity variable is approximated by a quadratic function based on all eight nodal points and the interpolation function for the pressure variable is approximated by a linear function based on the four nodal points at vertices. Using the developed code, the various characteristics of the fluid added mass and damping are investigated for the concentric cylindrical shell and the actual hexagon arrays of the liquid metal reactor cores.