• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1207-1213
• /
• 2008

This experiment was conducted to evaluate the effects of feeding different levels of lacquer (Rhus verniciflua Stokes) meal on the growth performance, carcass traits, fatty acid profile and meat quality of longissmuss dorsi (LD) muscle in finishing pigs. Pigs (n = 117; Landrace$\times$Yorkshire$\times$Duroc; initial body weight $80{\pm}0.4kg$) were allotted to three dietary treatments and fed lacquer at 0, 2 and 4% of the diet for five weeks. Inclusion of lacquer meal in the diets of pigs had no influence on their growth performance, carcass yield, loin eye area and fat free lean; however, pigs fed lacquer diets had lower backfat (linear, p = 0.006; quadratic, p = 0.004). Pigs fed increasing levels of lacquer meal had lower moisture (linear, p<0.001; quadratic, p = 0.008), crude fat (linear, p<0.001) and crude protein (linear, p<0.001; quadratic, p = 0.002) in LD muscle. The LD muscle of pigs fed lacquer meal had lower pH (linear and quadratic, p<0.05) at 6, 8 and 10 days, and linearly lower thio-barbituric acid reactive substances (TBARS, p<0.01) at 8 and 10 days and water holding capacity (WHC, p<0.05) at 3, 6, 8 and 10 days. The fatty acid composition of LD muscle revealed linearly lower stearic (p = 0.034) and total saturated fatty acid (p = 0.049) with increasing dietary lacquer meal levels. In general, higher lightness, redness and yellowness values were observed in LD muscle of pigs fed 2% lacquer meal on day 0 and subsequently on 3, 6, 8 and 10 days of refrigerated storage. The results of the current study suggest that lacquer meal can be incorporated up to 4% in the diet of finishing pigs without any adverse effects on performance; moreover, improvements in the meat quality during refrigerated storage can be obtained by inclusion of lacquer meal in the diet of finishing pigs.

• East Asian mathematical journal
• /
• v.22 no.2
• /
• pp.171-188
• /
• 2006

We consider the problem of an optimal control of the wave equation with a localized nonlinear dissipation. An optimal control is used to bring the state solutions close to a desired profile under a quadratic cost of control. We establish the existence of solutions of the underlying initial boundary value problem and of an optimal control that minimizes the cost functional. We derive an optimality system by formally differentiating the cost functional with respect to the control and evaluating the result at an optimal control.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.146-152
• /
• 2001

Two control techniques - PI and LQR(Linear Quadratic Regulator) - of DSTATCOM (Distribution Static Synchronous Compensator) for line voltage regulation in distribution system are presented. It is shown that the voltage waveform is improved if the proposed methods are applied in IEEE 13 radial distribution system using PSCAD/EMTDC package in case of single line-to-ground fault. The three cases - without control, with PI control and with LQR control - are compared. The LQR control is shown to be best in respect of response profile and control effort required among them.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.63-63
• /
• 2021

Bed shear stress is important variable in river flow analysis. The bed shear stress has an effects on bed erosion, sediment transport, and mean flow characteristics. Quadratic formula to estimate bed shear stress is widely used, 𝜏=𝜌c_fu|u| in which friction coefficient, c_f, needs to be assigned to numerical models. The aim of this study is to estimate Chezy coefficient using bathymetry data measured by ADCP. Bed form geometry variables will be estimated form bed profile, then Chezy coefficient will be determined using estimated bed form geometry variables in order to set friction coefficient to numerical model. From the probability density function obtained from the bathymetry data, Chezy coefficient will be randomly generated since Chezy coefficient is not uniform over the space and it does not depend on spatial variables such as water depth and distance from river bank. Numerical test will be performed to find to demonstrate randomly extracted Chezy coefficient is appropriate. The result of this study is valuable in that the friction coefficient is estimated in consideration of the bed profile, and as a result, uncertainty of the friction coefficient can be reduced.

• Molecules and Cells
• /
• v.26 no.4
• /
• pp.338-343
• /
• 2008

An embryonic stem cell is a powerful tool for investigation of early development in vitro. The study of embryonic stem cell mediated neuronal differentiation allows for improved understanding of the mechanisms involved in embryonic neuronal development. We investigated expression profile changes using time course cDNA microarray to identify clues for the signaling network of neuronal differentiation. For the short time course microarray data, pattern analysis based on the quadratic regression method is an effective approach for identification and classification of a variety of expressed genes that have biological relevance. We studied the expression patterns, at each of 5 stages, after neuronal induction at the mRNA level of embryonic stem cells using the quadratic regression method for pattern analysis. As a result, a total of 316 genes (3.1%) including 166 (1.7%) informative genes in 8 possible expression patterns were identified by pattern analysis. Among the selected genes associated with neurological system, all three genes showing linearly increasing pattern over time, and one gene showing decreasing pattern over time, were verified by RT-PCR. Therefore, an increase in gene expression over time, in a linear pattern, may be associated with embryonic development. The genes: Tcfap2c, Ttr, Wnt3a, Btg2 and Foxk1 detected by pattern analysis, and verified by RT-PCR simultaneously, may be candidate markers associated with the development of the nervous system. Our study shows that pattern analysis, using the quadratic regression method, is very useful for investigation of time course cDNA microarray data. The pattern analysis used in this study has biological significance for the study of embryonic stem cells.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.10
• /
• pp.1399-1406
• /
• 2011

This study aimed to establish the optimum level of palm kernel meal in the diet of Santa Ines lambs based on the sensorial characteristics and fatty acid profile of the meat. We used 32 lambs with a starting age of 4 to 6 months and mean weight of $22{\pm}2.75kg$, kept in individual stalls. The animals were fed with Tifton-85 hay and a concentrate mixed with 0.0, 6.5, 13.0 or 19.5% of palm kernel meal based on the dry mass of the complete diet. These levels formed the treatments. Confinement lasted 80 days and on the last day the animals were fasted and slaughtered. After slaughter, carcasses were weighed and sectioned longitudinally, along the median line, into two antimeres. Half-carcasses were then sliced between the 12th and 13th ribs to collect the loin (longissimus dorsi), which was used to determine the sensorial characteristics and fatty acid profile of the meat. For sensorial evaluation, samples of meat were given to 54 judges who evaluated the tenderness, juiciness, appearance, aroma and flavor of the meat using a hedonic scale. Fatty acids were determined by gas chromatography. The addition of palm kernel meal to the diet had no effect on the sensorial characteristics of meat juiciness, appearance, aroma or flavor. However, tenderness showed a quadratic relationship with the addition of the meal to the diet. The concentration of fatty acids C12:0, C14:0 and C16:0 increased with the addition of palm kernel meal, as did the sum of medium-chain fatty acids and the atherogenicity index. Up to of 19.5% of the diet of Santa Ines lambs can be made up of palm kernel meal without causing significant changes in sensorial characteristics. However, the fatty acid profile of the meat was altered.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.3
• /
• pp.75-86
• /
• 1982

The degeneration of two classes of thick beam elements has been conducted, one (DB6) based on the conventional Timoshenko beam assumptions whereas the other (DB7) based on the assumed cubic axial displacement profile. While an adjustable shear correction factor is required for the DB 6 element to compensate for the unrealistic distribution of shear strain across the thickness, the DB 7 element assumes the more realistic quadratic profile of shear strain at the outset. With the plane-stress continuum solution as reference, solutions obtained by these two element models are compared with the analytical Timoshenko solution, the analytical thin beam solution and several available solutions of other existing beam elements. The result indicates that the performance of the higher order beam element DB 7 is consistently superior to any others. This is true for the whole range of aspect ratios of beam, in both static and free vibration analyses.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.591-592
• /
• 2015

X1822-371 is a low mass X-ray binary with an accretion disk corona exhibiting partial eclipses and pulsations in the X-ray band. We update its orbital ephemeris by combining new RXTE observations and historical records, with a total time span of 34 years. There were 11 RXTE observations in 2011 but the eclipsing profile can be seen in only 4 of them. The eclipsing center times were obtained by fitting the profile with the same model as previous studies. Combined with the eclipsing center times reported by Iaria et al. (2011), the O-C analysis was processed. A quadratic model was applied to fit the O-C results and produced a mean orbital period derivative of $\dot{P}_{orb}=1.339(25){\times}10^{-10}s/s$, which is slightly smaller than previous records. In addition to the orbital modulation from the orbital profile, we also present our preliminary results for measuring the orbital parameters using the orbital Doppler effect from the pulsation of the neutron star in X1822-371. The updated orbital parameters from eclipsing profiles will be further compared with the ones from pulsar timing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.11
• /
• pp.763-770
• /
• 2022

In an environment where multiple drones are operated, collisions can occur when path points overlap, and collision avoidance in preparation for this is essential. When multiple drones perform multiple tasks, it is not appropriate to use a method to generate a collision-avoiding path in the path planning phase because the path of the drone is complex and there are too many collision prediction points. In this paper, we generate a path through a commonly used path generation algorithm and propose a collision avoidance method using speed profile optimization from that path segment. The safe distance between drones was considered at the expected point of collision between paths of drones, and it was designed to assign a speed profile to the path segment. The optimization problem was defined by setting the distance between drones as variables in the flight time equation. We constructed the constraints through linearize and convexification, and compared the computation time of SQP and convex optimization method in multiple drone operating environments. Finally, we confirmed whether the results of performing convex optimization in the 20 drone operating environments were suitable for the multiple drone operating system proposed in this study.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.26-35
• /
• 2003

Propellers operating in a given nonuniform ship wake generate unsteady loads leading to undesirable stern vibration problems. The skew is known to be the most proper and effective geometric parameter to control or reduce the fluctuating forces on the shaft. This paper assumes the skew profile as either a quadratic or a cubic function of the radius and determines the coefficients of the polynomial function by applying the simplex method. The method uses the converted unconstrained algorithm to solve the constrained minimization problem of 6-component shaft excitation forces. The propeller excitation was computed either by applying the two-dimensional gust theory for quick estimation or by the fully three-dimensional unsteady lifting surface theory in time domain for an accurate solution. A sample result demonstrates that the shaft forces can be further reduced through optimization from the original design.