• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1554-1561
• /
• 1998

When the superposition of realtime traffic and non-realtime traffic is applied to the ATM network, the successive cell loss(block loss) is more influential on the quality of service (QoS) of two traffic streams than the single loss in case of bursty traffic. Block loss can be identified as an important performance measure because of delay-oriented policy for realtime traffic. In this paper, we consider the system with the two-level overload control reducing of the recurrence of shut-down periods and develop a recursive algorithm to obtain both block loss and cell loss probabilities of both traffic. We can see that it gives the more precise and diverse investigations on performance analysis of queuing strategy.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• Journal of Broadcast Engineering
• /
• v.12 no.2
• /
• pp.148-158
• /
• 2007

Recently, IEEE 802.15.4a(low-rate UWB) technique has been paid much attention to the LR-UWB communication system for WPAN. However, there are various interferences such as MPI(Multi Path Interference) or IPI(Inter Piconet Interference) in IEEE 802.15.4a wireless channel. In order to cancel various interferences occurred to WPAN environment, in this paper, we propose a UWB wireless communication system with high QoS(Quality of Service) which is a chaotic-OOK(On-Off Keying) system using unipolar ZCD(Zero Correlation Duration) spreading code in physical layer level. Furthermore, we analyze its performance via simulations and verify the availability of proposed system with prototype implementation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.33-42
• /
• 2013

In the early stage of P2P, the technology was limited to narrow usage of file sharing, but currently, P2P technology has become essential to maximize the efficiency between associated technologies without additional deployment of high costly infrastructure and also the burden of the server. Especially, P2P media streaming service is a highly attractive service to mobile users. which requires a higher quality in the mobile environment in accordance with the development of technology of wired network as well as better mobile terminals. However, P2P technology should consider the trade-off between 'peer selfishness' and QoE for providing fairness. The P2P system also try to maximize the resource utilization through an incentive mechanism for service differentiation and encourage peers to contribute continuously for improving the overall system performance. In this paper, we propose an point-based incentive mechanism based on peer's contribution level and energy availability for service differentiation. We also introduce that the proposed mechanism efficiently enhances the system performance as the peer with incentive using contribution and energy obtains more effective resource distribution.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.1
• /
• pp.1-6
• /
• 2020

Fast service access involves keeping track of the location of mobile users, while they are moving around the mobile network for a satisfactory level of QoS (Quality of Service) in a cost-effective manner. The location databases are used to keep track of Mobile Terminals (MT) so that incoming calls can be directed to requested mobile terminals at all times. MT reporting cell system used in location management is to designate each cell in the network as a reporting cell or a non-reporting cell. Determination of an optimal number of reporting cells (or reporting cell configuration) for a given network is reporting cell planning (RCP) problem. This is a difficult combinatorial optimization problem which has an exponential complexity. We can see that a cell in a network is either a reporting cell or a non-reporting cell. Hence, for a given network with N cells, the number of possible solutions is 2^N. We propose a biogeography based optimization (BBO) for design of mobile station location management system in wireless communication network. The number and locations of reporting cells should be determined to balance the registration for location update and paging operations for search the mobile stations to minimize the cost of system. Experimental results show that our proposed BBO is a fairly effective and competitive approach with respect to solution quality for optimally designing location management system because BBO is suitable for combinatorial optimization and multi-functional problems.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.567-579
• /
• 2016

Several energy saving techniques in cellular wireless networks such as active base station (BS) selection, transmit power budget adaptation and user association have been studied independently or only part of these aspects have been considered together in literature. In this paper, we jointly tackle these three problems and propose an integrated framework, called dynamic cell reconfiguration (DCR). It manages three techniques operating on different time scales for ultimate energy conservation while guaranteeing the quality of service (QoS) level of users. Extensive simulations under various configurations, including the real dataset of BS topology and utilization, demonstrate that the proposed DCR can achieve the performance close to an optimal exhaustive search. Compared to the conventional static scheme where all BSs are always turned on with their maximum transmit powers, DCR can significantly reduce energy consumption, e.g., more than 30% and 50% savings in uniform and non-uniform traffic distribution, respectively.

• Annual Conference of KIPS
• /
• 2001.10a
• /
• pp.155-158
• /
• 2001

QoS(Quality of Service)측면에서 멀티미디어 응용 서비스를 제공하기 위해서 멀티미디어 통신은 여러 가지 요구사항을 지원하여야 한다. 연속적으로 생성된 미디어의 시간적인 관계를 유지하면서 재생시킬 수 있는 동기화 메커니즘은 무엇보다도 중요한 문제이다. 전달되는 매체를 공동으로 사용하기 때문에 트래픽의 폭주시, 지역적으로 멀리 떨어져 있는 경우에는 지연의 현상이 발생하게된다. 본 논문에서는 지연에 의해 발생되는 지연지터에 대하여 완충역할을 할 수 있는 최소 버퍼크기를 제시하였다. 주문형멀티미디어서버(MOS)의 경우 각 미디어 별로 서버에 저장하여 서비스하는 연구가 현재 활발히 진행되고 있으며 이것은 네트워크의 부하를 줄일 수 있다는 장점을 가지고 있다. 또한 이러한 데이터의 경우 클라이언트에서 어느 정도의 지터를 예상하여 버퍼의 크기를 갖고 있어야 하는 문제는 아직도 큰 문제점으로 나타나고 있다. 본 논문은 버퍼의 크기 및 재생에 관한 동기화 시점을 조정함으로서 버퍼의 오버플로우나 언더플로우의 현상을 방지하고자 한다. 제안한 기법은 기존의 기법보다 향상된 동기화 기법임을 시뮬레이션을 통해 검증하였다.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.345-353
• /
• 2021

Cloud computing represent a new era of computing that's forms through the combination of service-oriented architecture (SOA), Internet and grid computing with virtualization technology. Virtualization is a concept through which every cloud is enable to provide on-demand services to the users. Most IT service provider adopt cloud based services for their users to meet the high demand of computation, as it is most flexible, reliable and scalable technology. Energy based performance tradeoff become the main challenge in cloud computing, as its acceptance and popularity increases day by day. Cloud data centers required a huge amount of power supply to the virtualization of servers for maintain on- demand high computing. High power demand increase the energy cost of service providers as well as it also harm the environment through the emission of CO₂. An optimization of cloud computing based on energy-performance tradeoff is required to obtain the balance between energy saving and QoS (quality of services) policies of cloud. A study about power usage of resources in cloud data centers based on workload assign to them, says that an idle server consume near about 50% of its peak utilization power [1]. Therefore, more number of underutilized servers in any cloud data center is responsible to reduce the energy performance tradeoff. To handle this issue, a lots of research proposed as energy efficient algorithms for minimize the consumption of energy and also maintain the SLA (service level agreement) at a satisfactory level. VM (virtual machine) consolidation is one such technique that ensured about the balance of energy based SLA. In the scope of this paper, we explore reinforcement with fuzzy logic (RFL) for VM consolidation to achieve energy based SLA. In this proposed RFL based active VM consolidation, the primary objective is to manage physical server (PS) nodes in order to avoid over-utilized and under-utilized, and to optimize the placement of VMs. A dynamic threshold (based on RFL) is proposed for over-utilized PS detection. For over-utilized PS, a VM selection policy based on fuzzy logic is proposed, which selects VM for migration to maintain the balance of SLA. Additionally, it incorporate VM placement policy through categorization of non-overutilized servers as- balanced, under-utilized and critical. CloudSim toolkit is used to simulate the proposed work on real-world work load traces of CoMon Project define by PlanetLab. Simulation results shows that the proposed policies is most energy efficient compared to others in terms of reduction in both electricity usage and SLA violation.

• The KIPS Transactions:PartC
• /
• v.13C no.7 s.110
• /
• pp.889-896
• /
• 2006

ATM Forum has defined a guaranteed frame rate (GFR) service to serve Internet traffic efficiently. The GFR service provides virtual connections (VCs) for minimum cell rate (MCR) guarantees and allows them to fairly share the residual bandwidth. And ATM Forum has recommended a frame-based generic cell rate algorithm (F-GCRA) as a frame classifier, which determines whether an Am cell is eligible to use the guaranteed bandwidth in a frame level. An ATM switch accommodates cells in its buffer or drops them in a frame level according to current buffer occupancy. A FIFO shared buffer has so simple structure as to be feasibly implemented in switches, but has not been able to provide an MCR guarantee for each VC without buffer management based on per-VC accounting. In this paper, we enhance the F-GCRA frame classifier to guarantee an MCR of each VC without buffer management based on per-VC accounting. The enhanced frame classifier considers burstness of TCP traffic caused by congestion control algorithm so as to enable each VC to use its reserved bandwidth sufficiently. In addition, it is able to alleviate the unfairness problem in usage of the residual bandwidth. Simulation results show that the enhanced frame classifier satisfies quality of services (QoSs) of the GFR service for the TCP traffic.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.20-29
• /
• 2014

Recently, LTE is preparing to make a new leap forward LTE-A all over the world. As LTE privides high speed service, the role of mobile phones seems to change from voice to data service. According to Cisco, global mobile data traffic will increase nearly 11-fold between 2013 and 2018. Mobile video traffic will reach 75% by 2018 from 66% in 2013 in Korea. However, voice service is still the most important role of mobile phones. Thus, controllability of throughput and low BLER is indispensable for high-quality VoIP service among various type of traffic. Although the maximum AMR-WB, 23.85 Kbps is sufficient to a VoIP call, it is difficult for the LTE which can provide tens to hundreds of MB/s may not keep the certain level VoIP QoS especially in the cell-edge area. This paper proposes a new scheduling algorithm in order to improve VoIP performance after analyzing various scheduling algorithms. The proposal is the technology which applies more priority processing for VoIP than other applications in cell-edge area based on two-tier scheduling algorithm. The simulation result shows the improvement of VoIP performance in the view point of throughput and BLER.