• 센서학회지
• /
• 제33권4호
• /
• pp.224-229
• /
• 2024

Quantum dot light-emitting diodes (QD-LEDs) are emerging as next-generation displays owing to their high color purity, wide color gamut, and solution processability. Enhancing the efficiency of QD-LEDs involves preventing non-radiative recombination mechanisms, such as Auger and interfacial recombination. Generally, ZnO serves as the electron transport layer, which is known for its higher mobility compared to that of organic semiconductors and can lead to excessive electron injection. Some of the injected electrons pass through the quantum dot emissive layer and undergo non-radiative recombination near or within the organic hole transport layer (HTL), resulting in HTL degradation. Therefore, the implementation of electron blocking layers (EBLs) is essential; however, studies on all-solution-processed inverted InP QD-LEDs are limited. In this study, poly(9-vinylcarbazole) (PVK) is introduced as an EBL to mitigate HTL degradation and enhance the emission efficiency of inverted InP QD-LEDs. Using a single-carrier device, PVK was confirmed to effectively inhibit electron overflow into the HTL, even at extremely low thicknesses. The optimization of the PVK thickness also ensured minimal disruption of the hole-injection properties. Consequently, a 1.5-fold increase in the maximum luminance was achieved in the all-solution-processed inverted InP QD-LEDs with the EBL.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.146-146
• /
• 2015

We report the enhanced performance of poly(N-vinylcarbozole) (PVK)/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-based quantum-dot light-emitting diodes by inserting the polyaniline:poly (p-styrenesulfonic acid) (PANI:PSS) interlayer. The QD-LED with PANI:PSS interlayer exhibited a higher luminance and luminous current efficiency than that without PANI:PSS. Ultraviolet photoelectron spectroscopy results exhibited different electronic energy alignments of QD-LEDs with/without the PANI:PSS interlayer. By inserting the PANI:PSS interlayer, the hole-injection barrier at the QD layer/PVK interface was reduced from 1.45 to 1.23 eV via the energy level down-shift of the PVK layer. The reduced barrier height alleviated the interface carrier charging responsible for the deterioration of the current and luminance efficiency. This suggests that the insertion of PANI:PSS interlayer in QD-LEDs contributed to (i) increase the p-type conductivity and (ii) reduce the hole barrier height of QDs/PVK, which are critical factors leading to improve the efficiency of QD-LEDs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.92-92
• /
• 2010

Replacing the existing illumination with solid-state lighting devices, such as light-emitting diodes (LEDs) are expected to reduce energy consumption and environmental pollution as they provide better efficiency and longer lifetimes. Currently, white light emitting diodes are composed of UV or blue LED with down-converting materials such as highly luminescent phosphors White light-emitting diodes (LED) were fabricated with multi-shell nanocrystal quantum dots for enhanced luminance and improved stability over time. Multi-shell quantum dots (QDs) were synthesized through one pot process by using the Successive Ionic Layer Adsorption and Reaction (SILAR) method. As prepared, the multi-shell QD has cubic lattice of zinc-blend structure with semi-spherical shape with quantum yield of higher than 60 % in solution. Further, highly fluorescent multi-shell QD was deposited on the blue LED, which resulted in QD-based white LED with high luminance with excellent color rendering properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.420.1-420.1
• /
• 2016

Colloidal quantum dot (CQD) is emerging as a promising active material for next-generation solar cell applications because of its inexpensive and solution-processable characteristics as well as unique properties such as a tunable band-gap due to the quantum-size effect and multiple exciton generation. However, the most widely used spin-coating method for the formation of the quantum dot (QD) active layers is generally hard to be adopted for high productivity and large-area process. Instead, the spray-coating technique may potentially be utilized for high-throughput production of the CQD solar cells (CQDSCs) because it can be adapted to continuous process and large-area deposition on various substrates although the cell efficiency is still lower than that of the devices fabricated with spin-coating method. In this work, we observed that the subsequent treatment of two different ligands, halide ion and butanedithiol, on the lead sulfide (PbS) QD layer significantly enhanced the cell efficiency of the spray CQDSCs. The maximum power conversion efficiency was 5.3%, comparable to that of the spin-coating CQDSCs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.221-221
• /
• 2013

Striving to replace the well known silicon nanocrystals embedded in oxides with solution-processable charge-trapping materials has been debated because of large scale and cost effective demands. Herein, a silicon quantum dot-polystyrene nanocomposite (SiQD-PS NC) was synthesized by postfunctionalization of hydrogen-terminated silicon quantum dots (H-SiQDs) with styrene using a thermally induced surface-initiated polymerization approach. The NC contains two miscible components: PS and SiQD@PS, which respectively are polystyrene and polystyrene chains-capped SiQDs. Spin-coated films of the nanocomposite on various substrate were thermally annealed at different temperatures and subsequently used to construct metal-insulator-semiconductor (MIS) devices and thin film field effect transistors (TFTs) having a structure p-$S^{++}$/$SiO_2$/NC/pentacene/Au source-drain. C-V curves obtained from the MIS devices exhibit a well-defined counterclockwise hysteresis with negative fat band shifts, which was stable over a wide range of curing temperature ($50{\sim}250^{\circ}C$. The positive charge trapping capability of the NC originates from the spherical potential well structure of the SiQD@PS component while the strong chemical bonding between SiQDs and polystyrene chains accounts for the thermal stability of the charge trapping property. The transfer curve of the transistor was controllably shifted to the negative direction by chaining applied gate voltage. Thereby, this newly synthesized and solution processable SiQD-PS nanocomposite is applicable as charge trapping materials for TFT based memory devices.

• Current Optics and Photonics
• /
• 제4권3호
• /
• pp.161-173
• /
• 2020

Colloidal quantum dots (QDs) have gained tremendous attention as a key material for highly advanced display technologies. The performance of QD light-emitting diodes (QLEDs) has improved significantly over the past two decades, owing to notable progress in both material development and device engineering. The brightness of QLEDs has improved by more than three orders of magnitude from that of early-stage devices, and has attained a value in the range of traditional inorganic LEDs. The emergence of high-luminance (HL) QLEDs has induced fresh demands to incorporate the unique features of QDs into a wide range of display applications, beyond indoor and mobile displays. Therefore it is necessary to assess the present status and prospects of HL-QLEDs, to expand the application domain of QD-based light sources. As part of this study, we review recent advances in HL-QLEDs. In particular, based on reports of brightness exceeding 10⁵ cd/㎡, we have summarized the major approaches toward achieving high brightness in QLEDs, in terms of material development and device engineering. Furthermore, we briefly introduce the recent progress achieved toward QD laser diodes, being the next step in the development of HL-QLEDs. This review provides general guidelines for achieving HL-QLEDs, and reveals the high potential of QDs as a universal material solution that can enable realization of a wide range of display applications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.1100-1123
• /
• 2019

A code-based cryptosystem can resist quantum-computing attacks. However, an original system based on the Goppa code has a large key size, which makes it unpractical in embedded devices with limited sources. Many special error-correcting codes have recently been developed to reduce the key size, and yet these systems are easily broken through side channel attacks, particularly differential power analysis (DPA) attacks, when they are applied to hardware devices. To address this problem, a higher-order masking scheme for a McEliece cryptosystem based on the quasi-dyadic moderate density parity check (QD-MDPC) code has been proposed. The proposed scheme has a small key size and is able to resist DPA attacks. In this paper, a novel McEliece cryptosystem based on the QD-MDPC code is demonstrated. The key size of this novel cryptosystem is reduced by 78 times, which meets the requirements of embedded devices. Further, based on the novel cryptosystem, a higher-order masking scheme was developed by constructing an extension Ishai-Sahai-Wagne (ISW) masking scheme. The authenticity and integrity analysis verify that the proposed scheme has higher security than conventional approaches. Finally, a side channel attack experiment was also conducted to verify that the novel masking system is able to defend against high-order DPA attacks on hardware devices. Based on the experimental validation, it can be concluded that the proposed higher-order masking scheme can be applied as an advanced protection solution for devices with limited resources.

• 대한화학회지
• /
• 제48권3호
• /
• pp.249-253
• /
• 2004

감마선을 이용하여 수용액상에서 안정화 된 CdS 반도체 양자점을 제조하고, 제조된 양자점의 광학적 흡수스펙트럼을 분석하였다. CdS 양자점 제조시 카드뮴을 제공하는 물질로는 cadmium sulfate를 사용하였고, 황을 제공하는 물질로는 2-mercaptoethanol을 사용하였으며, 매개체로는 감마선이 조사된 물에 존재하는 환원제 $e^{-}_{aq}$을 이용하였다. 감마선 조사 전과 후에 제조된 CdS 양자점의 흡수스펙트럼을 비교한 결과, 감마선 조사 후에는 300 nm~400 nm 사이에서 CdS 양자점 형성에 의한 엑시톤 흡수 봉우리가 명확히 관측됨을 확인할 수 있었다. 또한 감마선의 조사 시간을 5분, 10분, 15분으로 증가시켜 감마선의 양을 다르게 조사시킨 결과 엑시톤 흡수 파장이 338 nm, 347 nm, 367 nm로 장파장 쪽으로 이동함을 확인함으로써, 감마선의 조사량을 조절하면 CdS 양자점의 크기를 변화시킬 수 있음을 알 수 있었다.

• 새물리
• /
• 제68권12호
• /
• pp.1356-1363
• /
• 2018

본 연구의 목적은 과학고등학교 학생들을 대상으로 '양자점 용액의 발광'을 주제로 하는 융합적 STEM(Science, Technology, Engineering and Mathematics) 프로젝트를 수행하게 했을 때 학생들이 어떤 창의성과 어떤 과학적 태도를 보이는지를 조사하는 것이었다. 이를 위해 STEM 프로젝트를 수행하고자 원하는 과학고등학교 2학년생 3명을 한 팀이 되도록 구성하였으며, 이들은 과학고등학교 수준 이상의 과학기술을 공부하기를 원하는 학생들이었다. 이들은 양자점 용액과 관련된 물리적 성질을 탐구하는 것으로부터 시작하여 점차 그들의 생각을 확장해 나가면서 공학, 기술, 수학을 통합해 나갔다. 그 과정에서 학생들은 과학적 문제해결력을 보였고, 아울러 협동심, 인내, 성취에 대한 만족감과 같은 과학적 태도를 나타냈다.

• 전기화학회지
• /
• 제18권1호
• /
• pp.38-44
• /
• 2015

본 총설은 다공성의 메조포러스 이산화티타늄 박막을 기반으로 하는 양자점-감응 태양 전지의 최근 발전 과정에 대해 정리하였다. 나노스케일의 무기물 양자점이 가지는 본질적 특성에 기반하고 다양한 양자점 구성 물질을 이용하여, 용액-공정 기반의 다양한 3세대 박막 태양전지를 만들 수 있었다. 양자점 감응제는 준비하는 방법에 따라 크게 2가지로 나눌 수 있는데, 첫 번째는 콜로이드 형태로 용액상에서 준비한 다음 $TiO_2$ 표면에 붙이는 것이고 두 번째는 양자점 전구체가 녹아있는 화학조를 이용하여 직접 $TiO_2$ 표면에 성장시키는 것이다. 폴리썰파이드 전해질을 사용하여, 콜로이드 양자점 감응제의 경우는 최근 들어 정밀한 조성 조절을 통하여 전체 광전 변환효율이 ~7%에 이르렀고 화학조 침전법을 이용하여 준비된 대표적 감응제인 CdS/CdSe는 ~5%의 효율을 보이고 있다. 앞으로는 지금까지 보고된 양자점 감응제의 뛰어난 광전류 생성 능력을 유지하면서, 새로운 정공 전달체의 개발 및 계면 조절을 통한 개방 전압과 채움 상수의 개선을 통한 효율 증가 및 안정성에 관한 체계적 연구가 필요한 상황이다.